PAEK WIRE CABLE

CITCABLE PAEK insulated wire is available by custom order and in crystalline and amorphous; we can extrude this material in round, square. We can also provide PAEK insulated wire in stranded and other wire. PAEK wire sized 38AWG --1/0AWG PAEK lead wire PAEK insulation wire for Motor

Viton Parallel Sensor wire

No brief introduction

High Temperature NTC Sensor Wire

No brief introduction

Nickel plated Silver peek wire

No brief introduction

Polyimide Coating wire cable

CITCABLE offers the original types and a wide range of new Polyimide Coating wire cable Types for use in UHV and High Vacuum.

Nickel Plated Silver NTC Sensor Wire

No brief introduction

Low Noise Triaxial Coaxial Cable

CIT cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion.

Gas Turbine Multi Conductor Shielded Cable

Options:Various colors available upon request36 AWG – 3/0AWG options are available1000V available upon requestOptional ShieldAvailable in colors

High Temperature Sensor Wires & Cables

CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire.

High Temperature PEEK Halogen free cable

Conductor Material:All strands used in the manufacture of the conductors shall be soft annealed silver or nickel-coated copper conforming to ASTM B298 or ASTM B355.Shield/Briad:The shield material shall be either stainless steel, silver tin-coated or nickel-coated copperInsulation Material: Polyetheretherketone (PEEK) insulation material is suggested, and the primary and jacket insulation material shall be to MIL-P-46183.

High Temperature PRT Cable and RTD Cable

CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire.

FKM Cable For Fluid level Sensors

No brief introduction

Thermoplastic Polyimide wire cable

CITCABLE offers the original types and a wide range of new TPI Wire Types for use in UHV and High Vacuum. RoHS Complian.

Ultra Flat TEFLON Cable

TELFON UL/CSA Approved Styles - A range of TEFLON Insulated wires designed are manufactured and fully released to meet the requirements.

Custom Thermocouple Wire

CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire.

PFA cable for High Definition Endoscopy（40AWG---44AWG)

We can meet your industry specific requirements promptly as we are equipped with advanced in-house wire and cable manufacturing equipment.We assure on time product delivery, whilst meeting all product quality expectations.

TPU Cables for brake lining wear sensors

ETFE Cable For PTC NTC RTD heating

We can meet your industry specific requirements promptly as we are equipped with advanced in-house wire and cable manufacturing equipment. We assure on time product delivery, whilst meeting all product quality expectations.

Cryogenic Cable

CITCables are designed for extremely low temperature environments and manufactured who can produce a broad range of extreme temperature Cryogenic Cables for use in the most challenging of environments. With clients from the Oil and Gas to the Steel and Nuclear industries, we are confident we have a cable to suit your requirements.

Radiation resistant PEEK RTD Sensor cable for nuclear industry

Conductor Material:All strands used in the manufacture of the conductors shall be soft annealed silver or nickel-coated copper conforming to ASTM B298 or ASTM B355.Shield/Briad:The shield material shall be either stainless steel, silver tin-coated or nickel-coated copperInsulation MaterialPolyetheretherketone (PEEK) insulation material is suggested, and the primary and jacket insulation material shall be to MIL-P-46183.

Polyimide Coating Cable

CIT cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion. Polyimide (PI) is a group of high performing polymers known for their exceptional chemical, thermal, and mechanical performance properties. Polyimides generally demonstrate excellent thermal stability in high as well as low temperatures. Polyimides also exhibit broad chemical resistance and good dielectric properties. Polyimides are poor conductors of heat and are highly disinclined to burn; they are also radiation resistant. These properties and others have made polyimides widely used in industries including medical, aerospace, automotive, electronics, chemical, sensors, and more

High Lubricity Polyimide and Teflon Composite Cable

CIT cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion. Polyimide (PI) is a group of high performing polymers known for their exceptional chemical, thermal, and mechanical performance properties. These materials demonstrate exceptional thermal stability in high and low temperatures and are extremely flame resistant. PI , CITCABLE PI / TEFLON composite, is a high lubricity polyimide blend for applications that require lower surface friction yet do not require the performance of pure TEFLON. Polyimide maintains broad chemical resistance and good dielectric properties in addition to its reduced coefficient of friction

High Lubricity TPI and PTFE Composite Cable

CIT cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion. Polyimide (PI) is a group of high performing polymers known for their exceptional chemical, thermal, and mechanical performance properties. These materials demonstrate exceptional thermal stability in high and low temperatures and are extremely flame resistant. PI , CITCABLE PI / TEFLON composite, is a high lubricity polyimide blend for applications that require lower surface friction yet do not require the performance of pure TEFLON. Polyimide maintains broad chemical resistance and good dielectric properties in addition to its reduced coefficient of friction

EV Battery Temperature Sensor XLPE Wire

Peek Thermocouple wire for Electronic cigarette

PEEK (polyetheretherketone) is a high-performance engineered polymer with one of the highest strength ratios with heat resistant properties. CITCABLE PEEK Insulated Wire results from the extrusion of PEEK over a wide range of solid and stranded conductors. We provide flat duplex insulated thermocouple wire consisting of a pair of conductors individually PEEK-resin insulated, and then PEEK-resin sheathed. In response to the needs of many of our customers, Types J, K and T, with 0.2-mm and 0.65-mm conductors, respectively. We can also make products compliant with Class 1.We can also make PEEK insulated, heat-resistant wire Cable.

high temperature Cable for PTC/NTC/RTD heating

CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire.

Radiation resistant Low Noise Cable

No brief introduction

Thermocouple Compensating Cable

CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire.

PEEK Insulated Type K Thermocouple Wire

No brief introduction

PTC Thermistor Sensors Cable

Super fine peek Sensor Cable

CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire.

High Temperature low noise Triaxial Cable

No brief introduction

Ribbon Teflon Wire Cable

TEFLON offers outstanding resistance to chemicals, oils and lubricants, retains it’s flexibility at low temperatures and has good weatherability. TELFON UL/CSA Approved Styles - range of TEFLON Insulated wires designed are manufactured and fully released to meet the requirements.

Ribbon PTFE Sensor CABLE

Military Specification Styles A range of PTFE Insulated wires, designed, manufactured and fully released to meet the requirements of MIL-W-16878 (NEMA HP4) TELFON UL/CSA Approved Styles A range of TEFLON Insulated wires designed are manufactured and fully released to meet the requirements.

High Temperature RTD Cable

CITCABLE manufacture high temp custom RTD (resistance temperature detector) Wire. Standard designs include 2 wire RTD, 3 wire RTD and 4 wire RTD constructions. Insulating temperatures range from 150C to 300C with various shielding options.