Temperature RTD Sensors Cable

High Temperature LOW NOISE Coaxial CABLE

No brief introduction

Thermocouple Extension Cable

CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire.

Shielded UL Singles Modified PFA/FEP Control Cables

Options:1. Shielded pairs, triads, overall shield, etc.2. Available with galvanized steel armor, aluminum interlocked armor or stainless steel overbraid3. Available in sizes 28 AWG through 3/0 AWG

PEEK COATED THERMOCOUPLE WIRES

No brief introduction

High Temperature 35mm2 TEFLON WIRE CABLE

No brief introduction

PEEK Pure Silver Wire

No brief introduction

ETFE Tight Buffered Fibre cable

OEM, ODM for Speclal PEEK, PAEK, TPI, PEI PFA ETFE, THV,VITON,SILICONE Coated Fibre Optic

Automotive Engine Sensors Cable

PEEK Armored Fiber Optic Cable

No brief introduction

26 Core PEEK Jacket cable

No brief introduction

Kapton Wire Cable

CITCABLE offers the original types and a wide range of new Kapton/PI Wire Types for use in UHV and High Vacuum.

VITON Flat Wire for NTC thermistor Sensor

CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire.

Ultra thin PEEK 36AWG 4C Wire cable

No brief introduction

PEEK WIRE FOR SENSOR

No brief introduction

MFA Cable for Shielded and unshielded communication

We can meet your industry specific requirements promptly as we are equipped with advanced in-house wire and cable manufacturing equipment. We assure on time product delivery, whilst meeting all product quality expectations.

PEEK Reinforced Optical Fiber Wire

CITCABLE have optimize 100% PEEK coating process to stabilize PEEK during extreme temperature fluctuations. This stabilization allows the optical fiber to retain PEEK’s strain transfer and optical properties while being free of compression-induced attenuation normally seen during temperature changes. CITCABLE PEEK reinforced optical fiber wire is ruggedized to protect against abrasion and physical trauma to reduce failures and extend the life of the fiber

High Temperature 50mm2 PFA CABLE

We can meet your industry specific requirements promptly as we are equipped with advanced in-house wire and cable manufacturing equipment.We assure on time product delivery, whilst meeting all product quality expectations.

PTFE Cable for Flame sensors

Fluoropolymer of tetrafluoroethylene, PTFE offers outstanding resistance to chemicals, oils, lubricants, temperature extremes and particularly suitable for use in severe environments.

Tungsten Heating Wire

No brief introduction

KAPTON SENSOR CABLE

CITCABLE offers the original types and a wide range of new Kapton/PI Wire Types for use in UHV and High Vacuum.

Ultra thin PEEK THERMOCOUPLE wire

PEEK (polyetheretherketone) is a high-performance engineered polymer with one of the highest strength ratios with heat resistant properties. CITCABLE PEEK Insulated Wire results from the extrusion of PEEK over a wide range of solid and stranded conductors.

liquid helium liquid nitrogen Cryogenic wire cable

CITCABLE: Cryogenic wire cable Low temperature -196℃, -272℃CITCABLE offers the original types and a wide range of new TPI Wire Types for use in Cryogenic engineering.

Low noise coaxial HFI 260 cable

HFI 260 cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion.

Ultra Light PEEK fiber optic cable

No brief introduction

K Type THERMOCOUPLE wire

CITCABLE can insulate many different wire types with PEEK including: solid copper,silver-and-nickel-plated, stranded, square and rectangle profile wires, stainless stee,aluminum,and other custom types.

Ultra thin PEEK Wire cable

No brief introduction

Tungsten Wire PEEK Coated

No brief introduction

Peek K type Thermocouple wire

No brief introduction

Radiation resistant Low Noise Triaxial Coaxial Cable

No brief introduction

Motor Sensors Flat FEP Cable

No brief introduction

Miniature Flexible Cable

CITCABLE can custom manufacture Miniature Flexible Cable and wire with a vast range of conductors and thermoplastic insulation to meet our customers’ specifications. We manufacture Flexible Cable and Flexible Wire in custom sizes as small as AWG 54--AWG36 In addition, CITCABLE has the expertise and experience in employing the kinds of thin-wall cable jacketing and insulation that many applications require.

PAEK WIRE CABLE Polyaryletherketone WIRE

PAEK (polyaryletherketone) WIRE CABLE is a family of high-performance polyketones tailored to fill cost and performance gaps between PEEK and other high-performance polymers. For example, ductility and toughness can be significantly improved versus comparable grades of PEEK, delivering 20% higher tensile elongation at yield and double tensile elongation at break values.

Flat Thermocouple peek cable TypesJ, K and T

We provide flat duplex insulated thermocouple wire consisting of a pair of conductors individually PEEK-resin insulated, and then PEEK-resin sheathed. In response to the needs of many of our customers, TypesJ, K and T, with 0.2-mm and 0.65-mm conductors, respectively. We can also make products compliant with Class 1. We can also make PEEK insulated, heat-resistant wire Cable.

Vacuum UHV cable TPI (PL450C extrusion grade)

CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire