CITCable: Wholesale Peek Cable, Viton Rubber Cable Manufacturers

PAEK WIRE CABLE

CITCABLE PAEK insulated wire is available by custom order and in crystalline and amorphous; we can extrude this material in round, square. We can also provide PAEK insulated wire in stranded and other wire. PAEK wire sized 38AWG --1/0AWG PAEK lead wire PAEK insulation wire for Motor

Nickel plated Silver peek wire

No brief introduction

Nickel Plated Silver NTC Sensor Wire

No brief introduction

Low Noise Triaxial Coaxial Cable

CIT cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion.

Gas Turbine Multi Conductor Shielded Cable

Options:Various colors available upon request36 AWG – 3/0AWG options are available1000V available upon requestOptional ShieldAvailable in colors

High Temperature PEEK Halogen free cable

Conductor Material:All strands used in the manufacture of the conductors shall be soft annealed silver or nickel-coated copper conforming to ASTM B298 or ASTM B355.Shield/Briad:The shield material shall be either stainless steel, silver tin-coated or nickel-coated copperInsulation Material: Polyetheretherketone (PEEK) insulation material is suggested, and the primary and jacket insulation material shall be to MIL-P-46183.

Radiation resistant PEEK RTD Sensor cable for nuclear industry

Conductor Material:All strands used in the manufacture of the conductors shall be soft annealed silver or nickel-coated copper conforming to ASTM B298 or ASTM B355.Shield/Briad:The shield material shall be either stainless steel, silver tin-coated or nickel-coated copperInsulation MaterialPolyetheretherketone (PEEK) insulation material is suggested, and the primary and jacket insulation material shall be to MIL-P-46183.

Peek Thermocouple wire for Electronic cigarette

PEEK (polyetheretherketone) is a high-performance engineered polymer with one of the highest strength ratios with heat resistant properties. CITCABLE PEEK Insulated Wire results from the extrusion of PEEK over a wide range of solid and stranded conductors. We provide flat duplex insulated thermocouple wire consisting of a pair of conductors individually PEEK-resin insulated, and then PEEK-resin sheathed. In response to the needs of many of our customers, Types J, K and T, with 0.2-mm and 0.65-mm conductors, respectively. We can also make products compliant with Class 1.We can also make PEEK insulated, heat-resistant wire Cable.

Thermocouple Compensating Cable

CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire.

PEEK Insulated Type K Thermocouple Wire

No brief introduction

Super fine peek Sensor Cable

CITCABLE Special Insulated wire is available by custom; we can extrude this material in round, square. We can also provide all special insulated wire in stranded and other wire.

PEEK COATED THERMOCOUPLE WIRES

No brief introduction

PEEK Pure Silver Wire

No brief introduction

PEEK Armored Fiber Optic Cable

No brief introduction

26 Core PEEK Jacket cable

No brief introduction

PEEK WIRE FOR SENSOR

No brief introduction

PEEK Reinforced Optical Fiber Wire

CITCABLE have optimize 100% PEEK coating process to stabilize PEEK during extreme temperature fluctuations. This stabilization allows the optical fiber to retain PEEK’s strain transfer and optical properties while being free of compression-induced attenuation normally seen during temperature changes. CITCABLE PEEK reinforced optical fiber wire is ruggedized to protect against abrasion and physical trauma to reduce failures and extend the life of the fiber

Ultra thin PEEK THERMOCOUPLE wire

PEEK (polyetheretherketone) is a high-performance engineered polymer with one of the highest strength ratios with heat resistant properties. CITCABLE PEEK Insulated Wire results from the extrusion of PEEK over a wide range of solid and stranded conductors.

Low noise coaxial HFI 260 cable

HFI 260 cable outstanding and excellent abrasion resistance, dielectric strength, chemical resistance, thermal endurance in long. protects against corrosion.

Ultra Light PEEK fiber optic cable

No brief introduction

K Type THERMOCOUPLE wire

CITCABLE can insulate many different wire types with PEEK including: solid copper,silver-and-nickel-plated, stranded, square and rectangle profile wires, stainless stee,aluminum,and other custom types.

Ultra thin PEEK Wire cable

No brief introduction

Tungsten Wire PEEK Coated

No brief introduction

Peek K type Thermocouple wire

No brief introduction

Radiation resistant Low Noise Triaxial Coaxial Cable

No brief introduction

PAEK WIRE CABLE Polyaryletherketone WIRE

PAEK (polyaryletherketone) WIRE CABLE is a family of high-performance polyketones tailored to fill cost and performance gaps between PEEK and other high-performance polymers. For example, ductility and toughness can be significantly improved versus comparable grades of PEEK, delivering 20% higher tensile elongation at yield and double tensile elongation at break values.

Flat Thermocouple peek cable TypesJ, K and T

We provide flat duplex insulated thermocouple wire consisting of a pair of conductors individually PEEK-resin insulated, and then PEEK-resin sheathed. In response to the needs of many of our customers, TypesJ, K and T, with 0.2-mm and 0.65-mm conductors, respectively. We can also make products compliant with Class 1. We can also make PEEK insulated, heat-resistant wire Cable.

PEEK Thermocouple cables for temperature sensor

PEEK (polyetheretherketone) is a high-performance engineered polymer with one of the highest strength ratios with heat resistant properties. CITCABLE PEEK Insulated Wire results from the extrusion of PEEK over a wide range of solid and stranded conductors.

S316L plated Silver heating wire

CITCables are designed for extremely low temperature environments and manufactured who can produce a broad range of extreme temperature Cryogenic Cables for use in the most challenging of environments. With clients from the Oil and Gas to the Steel and Nuclear industries, we are confident we have a cable to suit your requirements.

400 degrees magnet wire

350 degrees magnet wire

300 degrees magnet wire

260 degrees magnet wire

-40 °c to +200°c for fluoroelastomer/ viton/xlfe/fkm

-40 °c to +250°c for pfa

-40 °c to +200°c for fep

-40 °c to +150°c for etfe

-40 °c to +150°c for xlpe

-40 °c to +125°c for xlpe/tpv

-40 °c to +125°c for pvdf

-40 °c to +105°c for pvc/tpe

-60 °c to +260°c for peek

-60 °c to +260°c for ptfe

-60 °c to +250°c for pfa

-160 °c to +240°c for tpi

-60 °c to +200°c for fep

-60 °c to +200°c for xletfe

-50 °c to +150°c for etfe

-100 °c to +300°c for pi

-60 °c to +350°c for specials

-60 °c to +400°c for specials

hybrid electric vehicle cable

flexible coaxial cable in fpm

oil resistant multi-conductor cable for motor

0.2mm2--50mm2 fkm /viton cable

flexible fkm xlfe sheathed cable

-100 °c to +260°c for ptfe

-50 °c to +205°c for fep

-60 °c to +200°c for xletfe

-50 °c to +150°c for xlpvdf

Company profile

All products