Oleic Acid Coated Superfine Anti Corrosive Titanium Nanopowder
Spec: 40nm, 99.9%,high active, oleic acid coated.
Application for titanium nanopowder:
1. Titanium nanopowder, high purity,
uniform particle size, high surface activity, can be sufficiently applied coatings,
resins, could allow ordinary coating add wear and corrosion resistance
properties of other items, secondly, coating hardness and wear resistance
increased significantly, it also has the magical ability to repair itself, can
be used as metallic, non-metallic materials common Putty.
2. Nano-titanium powder coating than micron
titanium powder coatings with good protective properties. As the titanium nanopowder formed is chemically bonded in the coating, the coating is reduced to
increase due to the presence of metallic titanium caused the number of
carriers, and thus the resistance changes in the order of micrometers coating
of titanium powder coating resistance variation different, Further variation of
the resistance of the coating can not be explained by changes in the dielectric
constant.
3. Add the modified titanium nanopowder
after the epoxy matrix and adhesion between there was a marked improvement in the
strength of the modified nano titanium powder coating, stiffness and plasticity
are better than epoxy varnish coating, to improve the traditional epoxy varnish
brittleness problem of high proportion of modified nano titanium powder were
1%, 5%, 10% of the epoxy coating, through corrosion, adhesion and tensile tests
showed that adding 1% modified nano titanium powder corrosion resistance and
mechanical properties of the coating is best.
