ROHOconnector: Coaxial Connectors, Cable Assembly, GPS Antennas

2 Way Power Splitter 698-2700MHz MINI DIN 4.3-10 Female Square Cavity Microstrip Power Divider

Features： Wide Frequency Band for 4G and 5G, 698-2700MHz, 617-3800MHz, 698-3800MHz; Low Insertion Loss & Low VSWR; Low PIM, supports -140/-150/-155/-160dBc; N, 7/16 DIN, 4.3-10 Female connectors are available; Use for equal splitting of high power RF signals with minimal reflections or loss; Multi-type power splitters are available in 2-way, 3-way and 4-way; High Reliability, IP65 & IP67 waterproof.

SMA Male Straight Connector Solder Attachment End Launch for PCB

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

N Male to F Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

200W RF Coaxial Fixed Attenuator 698-2700MHz 3dB 6dB 10dB 15dB 20dB 30dB 40dB Avaliable with 7-16 DIN Female to Female Connector

7-16 DIN Attenuator Features： 7-16 DIN connector input, out connector can be N or 7-16 DIN; Maximum frequency of 18GHz; A female gender in and a female or male gender out; Attenuation values range from 1dB to 60dB.

2.4GHz 5.8GHz 5-15dBi Double Frequency MIMO Omni Direction N Female Connector Pole Mount Fiberglass Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

2 Way Power Splitter 698-2700MHz DIN 7-16 Female Square Cavity Microstrip Power Divider

Features： Wide Frequency Band for 4G and 5G, 698-2700MHz, 617-3800MHz, 698-3800MHz; Low Insertion Loss & Low VSWR; Low PIM, supports -140/-150/-155/-160dBc; N, 7/16 DIN, 4.3-10 Female connectors are available; Use for equal splitting of high power RF signals with minimal reflections or loss; Multi-type power splitters are available in 2-way, 3-way and 4-way; High Reliability, IP65 & IP67 waterproof.

SMA Male Straight Connector Solder Attachment Thru Hole for PCB

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

N Female to F Male Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

Low Pim 100W RF Fixed Attenuator 698-2700MHz 3-40dB Avaliable with 7-16 DIN Female to Female Connector

7-16 DIN Attenuator Features： 7-16 DIN connector input, out connector can be N or 7-16 DIN; Maximum frequency of 18GHz; A female gender in and a female or male gender out; Attenuation values range from 1dB to 60dB.

2way 2.4GHz 5.8GHz 5-9dBi Double Frequency MIMO Omni Direction N Female Connector Pole Mount Fiberglass Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

4 way 2GHz-8GHz wide band SMA Female power divider micro power splitter

Features： Wide Frequency Band Low Insertion Loss Low Intermodulation Widely used in IBS & DAS Low VSWR

SMA Male Straight Connector Solder Attachment 2 Hole Flange Mount with Stub Pin

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

N Female to F Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

Low Pim 100W 3-30dB RF Coaxial Fixed Attenuator with 7-16 DIN Female to Female Connector

7-16 DIN Attenuator Features： 7-16 DIN connector input, out connector can be N or 7-16 DIN; Maximum frequency of 18GHz; A female gender in and a female or male gender out; Attenuation values range from 1dB to 60dB.

2.4GHz 4dBi Omni Direction SMA Male Connector Wall Mount Antenna for WIFI Signal Transmission System

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

2 way 5-1218MHz Audio CATV TV splitter satellite signal indoor coaxial cable catv splitter

Features： Zinc die-cast housing, tin-plated Light weight and compact size Easy installation with two edge hole sites Low insertion loss, high isolation, perfect performance index Designed for SATV/CATV Power passing-24V 0.8A(MAX.) All ports F-(f)connector,75Ohm

SMA Male Straight Connector 2 Hole Flange Mount with Pin

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

N Male to N Male Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

50W Fixed Attenuator N Type Female to 7-16 DIN Male DC-3GHz/4GHz 1-50dB Avaliable

N Type Attenuator Features： N connector input, out connector can be 7-16 DIN, N, SMA or TNC; Maximum frequency of 18 GHz; A male gender in and a female gender out; Attenuation values range from 1dB to 60dB.

3dBi 2.4GHz Omni Direction SMA Male Connector Wall Mount Wireless WLAN WIFI Antenna with RG174 Cable

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

6 Way SMA Female power splitter 800-2700MHz Micro Strip Type power divider

Features： Wide Frequency Band Low Insertion Loss Low Intermodulation Widely used in IBS & DAS Low VSWR

SMA Male Straight Connector Solder Attachment 2 Hole Flange with Metal Through Wall Pin

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

New N Male to N Male Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

100W Fixed Attenuator N Type Female to 7-16 DIN Male 1-50dB Avaliable

N Type Attenuator Features： N connector input, out connector can be 7-16 DIN, N, SMA or TNC; Maximum frequency of 18 GHz; A male gender in and a female gender out; Attenuation values range from 1dB to 60dB.

2.4GHz 5dBi Omni Direction SMA Male Connector Wall Mount Antenna with RG174 Cable

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

3 way 380-2500MHz Power Divider RF Microstrip SMA Female WIFI Splitter 2G 3G GSM

Features： Wide Frequency Band Low Insertion Loss Low Intermodulation Widely used in IBS & DAS Low VSWR

SMA Male Straight Connector Solder Attachment 4 Hole Flange Mount with Stub Pin

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

N Male to N Male Right Angle RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

50W Fixed Attenuator 7-16 DIN Male to N Type Female DC-3GHz/4GHz 1-50dB Avaliable

7-16 DIN Attenuator Features： 7-16 DIN connector input, out connector can be N or 7-16 DIN; Maximum frequency of 18GHz; A female gender in and a female or male gender out; Attenuation values range from 1dB to 60dB.

2.4GHz 5dBi Omni Direction SMA Male Connector Wall Mount Antenna for SCDMA Wireless Data Transmission System

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

4 Way 698-2700MHz SMA Female Power Divider 50W Power Splitter

Features： Wide Frequency Band Low Insertion Loss Low Intermodulation Widely used in IBS & DAS Low VSWR

SMA Male Straight Connector Solder Attachment 4 Hole Flange with Pin

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

New N Male to N Male Right Angle RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

100W Fixed Attenuator 7-16 DIN Male to N Type Female DC-3GHz/4GHz 1-50dB Avaliable

7-16 DIN Attenuator Features： 7-16 DIN connector input, out connector can be N or 7-16 DIN; Maximum frequency of 18GHz; A female gender in and a female or male gender out; Attenuation values range from 1dB to 60dB.

2.4GHz 3dBi Omni Direction SMA Male Connector Wall Mount Antenna with RG174 Cable

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

High Quality 2 Way SMA Combiner 2 to 6 GHz Microstrip Power Divider High Frequency RF Power Splitter

Features： Wide Frequency Band Low Insertion Loss Low Intermodulation Widely used in IBS & DAS Low VSWR

SMA Male Straight Connector Crimp Solder Attachment for RG55 RG142 RG223 RG400 RG141 RG58 RG303 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

N Male to N Female Right Angle RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

10W RF Coaxial Fixed Attenuator with BNC Male to Female DC-3GHz/4GHz 1-30dB Avaliable

BNC Attenuator Features： BNC connector input, out connector is BNC; Maximum frequency of 4GHz; A female gender in and a female gender out; Attenuation values range from 1dB to 40dB.

Indoor 2.4-5.8GHz 3-5dBi Omni Direction N Female Connector Wireless WLAN WIFI Ceiling Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

Company profile

All products