ROHOconnector: Coaxial Connectors, Cable Assembly, GPS Antennas

8 way Power Splitter with 8 Way SMA Female connectors OUT 1 Way N Female connector IN 698-2700MHz Power Divider

Features： Wide Frequency Band Low Insertion Loss Low Intermodulation Widely used in IBS & DAS Low VSWR

SMA Male Straight Connector Crimp Solder Attachment for RG174 RG316 RG188 LMR100 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

N Tee Male to Female to Female RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

4 Hole Flange Powder Injection RF Coaxial N Female with Semi Steel .141" Cable Assembly

N Type Cable assembly Features： Can be combined with 2.2-5, 4.3-10, 7-16 DIN, BNC, F, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC or UHF connector; Body Can be 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

Indoor Wireless WLAN WIFI 2.4-5.8GHz 3-5dBi Omni Direction N Female Connector Ceiling Antenna with RG58 Cable

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

6 way Power Splitter with 6-Way SMA Female connectors OUT 1 N Female IN 698-2700MHZ 9dB Power Divider

Features： Wide Frequency Band Low Insertion Loss Low Intermodulation Widely used in IBS & DAS Low VSWR

SMA Male Straight Connector Crimp Solder Attachment for LMR240 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

New N Tee Male to Female to Female RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

N Bulkhead Female with RG316 Cable and Ring Terminal Assembly

N Type Cable assembly Features： Can be combined with 2.2-5, 4.3-10, 7-16 DIN, BNC, F, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC or UHF connector; Body Can be 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

2.4-5.8GHz 3-5dBi Indoor Wireless WLAN WIFI Omni Direction N Female Connector Ceiling Antenna with RG58 Cable

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

16 Way SMA Wilkinson RF Power Splitter Divider IBS DAS Splitter 698-2700MHz Microstrip

Features： Wide Frequency Band Low Insertion Loss Low Intermodulation Widely used in IBS & DAS Low VSWR

SMA Male Straight Connector Solder Attachment 4 Hole Flange with Metal Through Wall Pin

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

Low PIM N Male to N Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

RF Coaxial Low Pim N Bulkhead Female with .141" Cable Assembly

N Type Cable assembly Features： Can be combined with 2.2-5, 4.3-10, 7-16 DIN, BNC, F, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC or UHF connector; Body Can be 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

2.4GHz 5.8GHz 3-5dBi Omni Direction N Female Connector MIMO Ceiling Antenna for Indoor DAS Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

3 Way Low Pim 150dbc RF Splitter Amplifier With N Female Connector 698 - 2700mhz Ip65

Features： Wide Frequency Band for 4G and 5G, 698-2700MHz, 617-3800MHz, 698-3800MHz; Low Insertion Loss & Low VSWR; Low PIM, supports -140/-150/-155/-160dBc; N, 7/16 DIN, 4.3-10 Female connectors are available; Use for equal splitting of high power RF signals with minimal reflections or loss; Multi-type power splitters are available in 2-way, 3-way and 4-way; High Reliability, IP65 & IP67 waterproof.

RP SMA Male Straight Connector Crimp Solder Attachment for LMR240 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

N Male to N Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

Straight RF Coaxial N Male Connector with RG58 Cable Assembly

N Type Cable assembly Features： Can be combined with 2.2-5, 4.3-10, 7-16 DIN, BNC, F, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC or UHF connector; Body Can be 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

PCB Antenna 2.4-5.8GHz 2.5-3dBi Internal WiFi Omni Built-in WiFi Antenna with IPEX MHF Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

4 Way 698-3800MHz RF Power Divider Splitter With N Female Connector

Features： Wide Frequency Band for 4G and 5G, 698-2700MHz, 617-3800MHz, 698-3800MHz; Low Insertion Loss & Low VSWR; Low PIM, supports -140/-150/-155/-160dBc; N, 7/16 DIN, 4.3-10 Female connectors are available; Use for equal splitting of high power RF signals with minimal reflections or loss; Multi-type power splitters are available in 2-way, 3-way and 4-way; High Reliability, IP65 & IP67 waterproof.

SMA Male Straight Connector Solder Attachment for RG402 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

N Female to N Female 4 Hole Flange Mount Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

Straight Plastic Jacket N Male to N Male Connector with RG58 Cable Assembly

N Type Cable assembly Features： Can be combined with 2.2-5, 4.3-10, 7-16 DIN, BNC, F, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC or UHF connector; Body Can be 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

2.4GHz 5.8GHz 2.5dBi 3dBi Dual Band Internal WiFi Omni Built-in PCB Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

2 Way Power Splitter 698-2700MHz N Female Square Cavity Power Divider for Passive DAS

Features： Wide Frequency Band for 4G and 5G, 698-2700MHz, 617-3800MHz, 698-3800MHz; Low Insertion Loss & Low VSWR; Low PIM, supports -140/-150/-155/-160dBc; N, 7/16 DIN, 4.3-10 Female connectors are available; Use for equal splitting of high power RF signals with minimal reflections or loss; Multi-type power splitters are available in 2-way, 3-way and 4-way; High Reliability, IP65 & IP67 waterproof.

RP SMA Male Straight Connector Crimp Solder Attachment for RG213 LMR400 RG214 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

New N Female to N Female 4 Hole Flange Mount Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

Straight RF Coaxial N Female to N Female Jack Connector with RG316 Cable Assembly

N Type Cable assembly Features： Can be combined with 2.2-5, 4.3-10, 7-16 DIN, BNC, F, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC or UHF connector; Body Can be 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

Dual Band 2.4GHz 5.8GHz 2.5dBi 3dBi Internal Omni Built-in PCB Patch Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

3 Way Power Splitter 698-4000MHz N Female Square Cavity

Features： Wide Frequency Band for 4G and 5G, 698-2700MHz, 617-3800MHz, 698-3800MHz; Low Insertion Loss & Low VSWR; Low PIM, supports -140/-150/-155/-160dBc; N, 7/16 DIN, 4.3-10 Female connectors are available; Use for equal splitting of high power RF signals with minimal reflections or loss; Multi-type power splitters are available in 2-way, 3-way and 4-way; High Reliability, IP65 & IP67 waterproof.

SO239 UHF Female Straight Bulkhead Connector Solder Attachment Front Mount with Solder Cup

UHF Connector Features： Can terminate to coax or terminal; Can be male, female or sexless gender with 50ohm impedance; Body can be straight or right angle; Mount Method can be 4 hole flange, bulkhead, 4 hole panel or mountless options; Attachment methods include clamp/solder, crimp/solder, field replaceable or solder; Body is brass or zinc.

Low Pim N Female to N Female Bulkhead Mount Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

N Male to N Female Bulkhead with LMR400 Coaxial Cable Assembly

N Type Cable assembly Features： Can be combined with 2.2-5, 4.3-10, 7-16 DIN, BNC, F, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC or UHF connector; Body Can be 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

Dual Band 2.4GHz 5.8GHz 2.5dBi 3dBi WIFI FPC Flex Circuit Antenna with IPEX MHF Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

4 Way Power Splitter 698-4000MHz N Female Square Cavity for IBS DAS

Features： Wide Frequency Band for 4G and 5G, 698-2700MHz, 617-3800MHz, 698-3800MHz; Low Insertion Loss & Low VSWR; Low PIM, supports -140/-150/-155/-160dBc; N, 7/16 DIN, 4.3-10 Female connectors are available; Use for equal splitting of high power RF signals with minimal reflections or loss; Multi-type power splitters are available in 2-way, 3-way and 4-way; High Reliability, IP65 & IP67 waterproof.

SO239 UHF Female Straight Connector Clamp Solder Attachment for RG58 LMR195 Cable

UHF Connector Features： Can terminate to coax or terminal; Can be male, female or sexless gender with 50ohm impedance; Body can be straight or right angle; Mount Method can be 4 hole flange, bulkhead, 4 hole panel or mountless options; Attachment methods include clamp/solder, crimp/solder, field replaceable or solder; Body is brass or zinc.

N Female to N Female Straight RF Connector Adapter with Body Flat

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

Straight RF Coaxial N Male to N Male Connector Connector with Semi Steel Rigid .141" Cable Assembly

N Type Cable assembly Features： Can be combined with 2.2-5, 4.3-10, 7-16 DIN, BNC, F, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC or UHF connector; Body Can be 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

FPC Antenna Dual Band 2.4GHz 5.8GHz 3dBi IPEX MHF Connector WIFI Flex Circuit Antenna with 1.13mm Cable

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

Company profile

All products