ROHOconnector: Coaxial Connectors, Cable Assembly, GPS Antennas

2W MINI DIN 4.3-10 Male Termination Dummy Load 50ohm DC-3GHz/4GHz RF Terminator

Features： Wide Frequency Band, can cover 4G/5G system; Low VSWR; Low PIM3; N,7-16 DIN, 4.3-10 connectors are available; IP65/IP67 Waterproof Standard.

27MHz CB Radio Antenna BNC PL259 Connector Soft Whip Magnetic Base Compatible with Cobra Midland Portable Handheld Car Mobile Radio Scanner

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

New N Male to BNC Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

High Power 100W N Type Fixed Attenuator Male to Female 1-50dB Avaliable

N Type Attenuator Features： N connector input, out connector can be 7-16 DIN, N, SMA or TNC; Maximum frequency of 18 GHz; A male gender in and a female gender out; Attenuation values range from 1dB to 60dB.

2.4GHz 2.5dBi Omni Direction Wireless WLAN WIFI Antenna with SMA Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

2W 50ohm DC-3GHz RF Terminator BNC Male Termination Dummy Load

Features： Low VSWR & Low Attenuation ; 3G/4G/5G LTE Coverage; Indoor & Outddoor applicationn; Wide Frequency Band ; Widely used for in-building Soloution; All Sepcifications can be changed as you enquirements.

868MHz 4.5dBi LoRa Antenna,N Female Connector Weatherproof for Harsh Outdoor Environments, for HNT, LoRaWAN and FLARM

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

N Male to BNC Female Right Angle RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

New Coaxial Microwave 100W N Type Fixed Attenuator DC-3GHz/4GHz 1-50dB Avaliable

N Type Attenuator Features： N connector input, out connector can be 7-16 DIN, N, SMA or TNC; Maximum frequency of 18 GHz; A male gender in and a female gender out; Attenuation values range from 1dB to 60dB.

2.4GHz 3dBi Omni Direction Terminal Rubber Rod Antenna with SMA Male Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

2W NEX10 Male Termination Dummy Load 50ohm DC-3GHz/6GHz RF Terminator

Features： Wide Frequency Band; 2G/3G/4G/5G LTE Coverage; Low VSWR; Widely used for In-building Solutions; High Quality; Durable&Long Service Life; A variety of products can be chosen; All the specifications can be changed as customer's requirment.

SMA Female Straight Bulkhead Connector Crimp Solder Attachment for RG316 RG174 RG188 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

N Female to BNC Male Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

150W N Type Fixed Attenuator Male to Female Frequency DC-3GHz/4GHz 1-50dB Avaliable

N Type Attenuator Features： N connector input, out connector can be 7-16 DIN, N, SMA or TNC; Maximum frequency of 18 GHz; A male gender in and a female gender out; Attenuation values range from 1dB to 60dB.

2.4GHz 5.8GHz 2.5dBi Omni Direction Collapsible Rotatable WLAN WIFI Terminal Antenna with SMA Male Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

10W 50ohm DC-6GHz RF Terminator TNC Male Termination Dummy Load

Featrues: DC to 18 GHz Frequency Range; VSWR 1.4:1 Max; Max Power 10 Watt (CW); TNC Male Coaxial Interface.

SMA Female Straight Bulkhead Mount Connector Solder Attachment for RG402 .141" Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

New N Female to BNC Male Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

High Power 200W N Type Fixed Attenuator Male to Female 1-50dB Avaliable DC-3GHz/4GHz

N Type Attenuator Features： N connector input, out connector can be 7-16 DIN, N, SMA or TNC; Maximum frequency of 18 GHz; A male gender in and a female gender out; Attenuation values range from 1dB to 60dB.

WLAN WIFI Antenna 2.4GHz 5.8GHz 5dBi Omni Direction Collapsible Rotatable with SMA Male Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

5W 50ohm DC-1GHz RF Terminator UHF Male Termination Dummy Load

Featrues: Wide Frequency Band Covering 555-4000MHz; Excellent Performance in PIM; Low VSWR; Indoor& Outdoor Using IP65; Available with Type N, DIN7-16, 4.3-10, NEX10 Connectors.

SMA Female Straight Bulkhead Connector Crimp Solder Attachment for LMR195 RG58 RG142 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

N Female to BNC Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

High Power 500W N Type Fixed Attenuator Male to Female DC-3GHz/4GHz 1-50dB Avaliable

N Type Attenuator Features： N connector input, out connector can be 7-16 DIN, N, SMA or TNC; Maximum frequency of 18 GHz; A male gender in and a female gender out; Attenuation values range from 1dB to 60dB.

2.4-5.8GHz 5dBi Wireless Omni Direction UFL IPEX Connector Clip-on Mount for Automobile Mobile Handheld Walkie-talkie Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

433MHz Electrodepot Unity Gain Omni Antenna with Magnetic Base and Male SMA Connector Impedance 50ohm

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

SMA Female Straight Connector Crimp Solder Attachment for RG58 RG303 RG141 LMR195 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

New N Female to BNC Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

5W 90db Step Attenuator Step Variable Attenuator N K-K 0-90db 50ohm

SMA Attenuator Features： SMA connector input, out connector can be N or SMA; Maximum frequency of 26GHz; A female gender in and a female or male gender out; Attenuation values range from 1dB to 60dB.

External Whip 2.4-5.8GHz 3dBi Omni Direction Terminal WiFi Antenna with SMA Male Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

2.4GHz 5.8GHz WiFi Omni Antenna with SMA Male Cable RG174

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

SMA Female Straight Connector Crimp Solder Attachment for RG316 RG174 RG188 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

N Female to BNC Female 4 Hole Flange Mount Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

5W 60db Step Key Press Attenuator N K-K 0-60db In 1dB Step

SMA Attenuator Features： SMA connector input, out connector can be N or SMA; Maximum frequency of 26GHz; A female gender in and a female or male gender out; Attenuation values range from 1dB to 60dB.

Screw Mount 2.4GHz 2.15dBi Omni Direction Mobile Terminal WiFi Antenna SMA Male Connector with RG174 Cable

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

GPS Active 42dB Antenna Compatible with Glonass SMA Male Cable with Magnetic Mount 3 Meters Wire RG174

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

SMA Female Waterproof Straight Bulkhead Connector Crimp Solder Attachment for RG316 RG174 RG188 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

Low Pim N Male to 7-16 DIN Male Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

5W 30db RF Step Press Coaxical Key Variable Adjustable Attenuator N K-K 0-30db In 1dB Step

SMA Attenuator Features： SMA connector input, out connector can be N or SMA; Maximum frequency of 26GHz; A female gender in and a female or male gender out; Attenuation values range from 1dB to 60dB.

2.4GHz 5.8GHz 5dBi Omni Direction WIFI WLAN Antenna SMA Connector Screw Mount with RG174 Cable

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

Company profile

All products