High Temperature Vacuum Tube Furnace for Lab Material Drying

High temperature vacuum tube furnace uses silicon molybdenum rod as heating element, rated temperature is 1700℃.

Lab Low Noise Vertical Planetary Ball Mill Grinding Machine

The laboratory planetary ball milling machine is widely used in college, university, scientific research institute and enterprises.

0-30V Lithium Battery Impedance Tester for Pouch Cell and Cylinder Cell

This battery internal resistance tester is widely used for battery manufacture and battery sellers to check the battery performance.

Oil Seal Mute 0.4L Lab Planetary Ball Mill for Battery Raw Material Grinding

0.4L Bench-top Lab Ball Miller Machine for Battery Raw Material Grinding with Output 100nm

Small Constant Temperature and Humidity Chamber for Lab Battery Testing

This constant temperature and humidity test chamber is mainly for laboratory simulate the battery life in different climate environment.

8011 High Purity Aluminum Foil for Battery Cathode Substrate

High quality battery grade Aluminum Foil Roll for lithium ion battery cathode current collector

Good Consistency Lithium Cobalt Oxide LiCoO2 Powder for Li Battery Cathode Material

High Consistency Lithium cobalt oxide LiCoO2 powder LCO is mainly used for lithium battery cathode raw material

Lithium Iron Phosphate LiFePO4 Powder for Lithium ion Battery Raw Materials

This is a high discharge rate LFP (LiFePO4) powder for cathode materials of lithium-ion batteries. Typical applications of the high-rate cathode material are for the uses in robotics, photo flash, EV, etc.

Lithium Nickel Cobalt Aluminum Oxide NCA Powder for Battery Lab

NCA Lithium Nickel Cobalt Aluminum Oxide Powder for Power Lithium Iron Battery and Other Small Capacity Battery

Lithium Nickel Cobalt Manganese Oxide NMC 811 NCM811 Powder

High Nickel Ratio NCM811 Lithium ion Battery Cathode Materials LiNiMnCoO2 NMC 811 Powder

N-methyl-2-pyrrolidone Solvent NMP for Li ion Battery Cathode Material

This High Quality 99.9% Electronic Grade N-Methyl Pyrrolidone NMP Solvent is mainly for Lithium ion Battery Lab Research

Polyvinylidene Fluoride PVDF Binder for Lithium ion Battery Cathode Material

High Purity Raw Material PVDF Resin Powder for Lithium ion Battery Binder

Sodium Carboxymethyl Cellulose CMC Powder for Battery Anode

Sodium powder carboxy methyl cellulose (CMC) of lithium ion battery anode materials.

High Purity Natural Graphite for Lithium Battery Anode Material

High Purity Natural Graphite is mainly used for Lithium Battery Anode Material in Laboratory.

High Performance Artificial Graphite MCMB for Battery Anode Material

High Performance Artificial Graphite MCMB is mainly used for Lithium Battery Anode Material in Laboratory.

Styrene-Butadiene Rubber (SBR) Binder for Lithium Battery Anode Material

SBR is a water based binder which is mainly used to prepare anode electrode for Lithium-ion batteries. Such binder is characterized by Strong adhesion and high ageing-retardant.

Battery Anode Raw Oxide Material LTO Powder for Lithium Titanate Battery

Lithium Titanate Oxide LTO Powder is mainly used in energy storage battery, EV battery, special power supply, super capacitor and so on.

Electrolytic Copper Foil for Lithium Battery Anode Substrate

This high purity copper foil is used as a substrate for coating anode materials in Li-ion battery research.

304/316 Stainless Steel CR20XX Button Battery Cases with Coin Cell Parts

This coin cell cases is CR20XX series, with coin cell parts, mainly use for lab lithium ion battery research.

​99.9% High Purity Round Disc Lithium Metal Chips for Lab Coin Cell Battery

High purity Lithium Metal Chips is mainly used for coin cell material research

Lithium Ion Battery Electrolyte with 1Mol/L LiPF6 and EC DMC DEC

Battery Liquid LiPF6 Electrolyte is mainly used for lithium ion battery, Salt and Solvent can be customized.

Stainless Steel Meshed Coin Cell Cases for Lab Li-Air Battery Research

This meshed coin cell cases is mainly use for lab li-air battery research.

CR2032 Coin Cell Battery Holder with Tips

Lab Button Battery Holders for CR2016, CR2025, CR2032 Coin Cells

Polypropylene Membrane PP Film Battery Separator for Lithium Battery

304 Stainless Steel CR2032 Coin Cell Cases for Lab

This 304SS CR2032 coin cell cases is widely used in lab for lithium ion battery research.

25µm Microporous Monolayer Membrane PP Battery Separator Celgard 2500

25µm Microporous Monolayer Membrane (PP) for High-Rate and Low Temperature Primary Lithium Batteries

Microporous Monolayer PP Membrane Battery Separator Celgard 2400

This Microporous Monolayer Polypropylene PP Membranes Celgard 2400 is usually used to the disposable (primary) lithium battery.

Pouch Cell Case Aluminum Laminated Film for Lithium ion Battery

113um Thickness Aluminium Laminated Film Roll For Pouch Cell Case Making

304ss Belleville Washer Spring Wave Spring For Coin Cell Assembly

This stainless steel wave spring is mainly for lab coin cell battery assembly.

Stainless Steel Conical Spring Cone Spring For CR20XX Coin Cell Assembly

This 304/316 stainless steel conical spring is mainly for lab cr20xx coin cell battery assembly.

Stainless Steel Coin Cell Spacer for Lab Battery Research

This 304/316 stainless steel coin cell spacer is mainly for lab cr20xx coin cell battery assembly.

PP/PE/PP Three Layers Lithium Battery Separator Celgard 2325

25um PP/PE/PP membrane Celgard 2325 battery separator for lithium ion battery lab research.

Precision Manual Coin Cell Disc Cutter for Electrode Punching

AOT-CP60 button battery punching machine is a patented product independently developed by our company. This coin cell disc cutter is specially used for battery electrode round disc cutting.

Compact Coin Cell Disc Cutting Machine for Battery Separator

This machine is a compact disc cutter with quality sliding rail for battery separator precision cutting. It can be easily placed into a glove box via a transition chamber which the diameter larger than 230mm.

Lab Automatic Electric Coin Cell Crimping Machine for All CR20XX Button Battery

This electric coin cell crimper can be used for most kinds of button battery automatic crimping in laboratory.

Vertical Electric Roller Press Machine for Battery Electrode Calendering

This equipment is mainly used for electric rolling press of battery electrode sheet, and a few precious metal materials like gold and silver, nonferrous materials like copper and aluminum in lab.

Horizontal Manual Battery Roller Press Machine for Electrode Sheet Calendering

This is a manual rolling press machine which used for pressing battery materials like copper and aluminum foil/electrode for lab .The rolling thickness can be regulated, it is easy to operate.

Hydraulic Crimping Machine for All Types of CR20XX Coin Cell

Thiis hydraulic crimping machine a new design and CE Certified manual coin cell crimper with lighter weight and a smaller footprint. It is suitable for sealing various types of coin cells such as CR2032,CR2025,and CR2016 with included die.

Pressure Controlled Electric Coin Cell Crimping Machine for All types of Button Battery

AOT-MSK-160E is a compact Pressure Adjustable Electric Crimper for CR20XX coin cells, such as CR2016, CR2025, CR2032.

Pneumatic Coin Cell Crimping Machine for Li-ion Battery Lab Research

AOT-PCM-20 pneumatic coin cell crimper machine is a newly designed coin cell sealing machine with lighter weight. It’s mainly used for button battery material lab researching.