Factory Supply antenna ,All Kinds Of Electronic Products

wireless cell sites 2.4 and 5.8GHz omni antenna

Ф145x300(mm); N femaleX6;

Point to Point Long Range Microwave Radios Flex I/O fiberglass wlan antenna

fiberglass omni antenna;H360° E15°;2400-2500MHz;mimo antenna

Wireless P2P Alarm wireless operation antenna

2X12dBi 2XN female Ф33x57(mm);IP66;outdoor good performance

Wireless CPE Wireless Controller omni high gain MIMO antenna

15dBi X2 SMA male X2 Φ48x580mm

MIMO OUTDOOR BASE STATION 4G outdoor antenna with 2 cable 2 connector

3G/4G Router Broadbad Radio antenna with 2 cable 2 connector

indoor mimo ceiling antenna

3G;4G LTE;MiMo;PIMD 3th:-85DBM(@2W);Φ180x130mm

IEEE 802.11n ×2 MIMO dual-band radio technology antenna

2.4GHz MIMO omni antenna 11dBi fiberglass Φ76x1200mm

3G Modems 3G LTE Multi AP antenna

1710-2170MHz mimo outdoor antenna 12X2(dBi) 7/16 D-KX2

GPS glonass wifi 4G LTE mimo 5 in 1 or 7 in 1 antenna

GPS Glonass wifi 4G LTE GSM mimo 5 in 1 or 7 in 1 combine antenna

magnet 4g high antenna 5dBi X2 two cable antenna

5dbiX2 indoor antenna;magnet;4G

Tunneling Router panel MiMo antenna 18dbi

2x18dBi;2xN female;5150-5850-MHz;5.8GHz panel antenna

Wireless security system designed antenna

17dBi X2 N female X2 306x306x25-mm;wlan 17dBi panel antenna

2.4&5.8 GHz Dual Band sector panel antenna high gain outdoor antenna

16dBi N female x 4 470x170x50mm;MIMO wlan panel antenna 16dBi x4

Wireless videoaudio senders receiver; wireless RoIP wlan patch MiMo antenna

11dbi X2 N female 105X85X35mm;wlan mimo patch antenna

2.4 WLAN,WiFi system high gain panel mimo antenna

10dbi N male 220X190X50-mm wlan mimo ourdoor panel antenna

Point to multi-point systems antenna

18dBi X2 RPSMA X2 305x305x25mm panel mimo antenna

2.4 GHz wireless applications aerial

18dbiX2 N femaleX2 305X305X25MM outdoor mimo panel antenna

wlan 2.4GHz and 5.8GHz dual band antenna

dualband dual polarization;2.4&5.8GHz antenna

RF Connector Right Angle MINI DIN 4.3-10 Male Plug to Male with 1/2 Superflexible Cable Assembly

4.3-10 Cable assembly Features： Can be combined with 2.2-5, 4.3-10, 7-16 DIN, N, NEX10, QMA, or SMA connector; Body Can be right angle or straight connectors; Body Can be 4 hole panel, bulkhead or standard mount connectors; Cable Can use flexible or corrugated cable.

SMA Female Straight Bulkhead Mount Connector Solder Attachment End Launch for PCB

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

New SMB Jack Male Right Angle Connector Solder Attachment Thru Hole for PCB

SMB Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be jack or plug gender with 50 Ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder or solder; Body is brass.

QMA Male to N Female RF Coaxial Adaptor

QMA adapters Features： Allow to interface QMA connectors with QMA, N or SMA connectors; Has female to male or male to female gender varieties; Quick disconnect version of the SMA adaptor and shares the same internal construction; Excellent performance up to 18GHz; Because of the innovative coupling mechanism, a 360-degree butt joint is maintained resulting in low RF leakage; QMA series offers a more convenient installation than SMA; The interface mates with a snap-on instead of a threaded coupling, has a significant time advantage.

433MHz 3dBi Wireless Omni Direction IPEX UFL Connector Screw Mount for Mobile Equipment Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

RF Coaxial NEX10 Male to MINI DIN 4.3-10 Male with 1/4 Superflexible Cable Assembly

NEX10 Cable assembly Features： Can be combined with, 4.3-10, NEX10, 7-16 DIN, N or SMA connector; Body is right angle or straight connectors; Cable Can use flexible or Corrugated cable.

SMA Female Straight Connector Solder Attachment Surface Mount for PCB

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

SMB Jack Male Right Angle Bulkhead Mount Connector Solder Attachment Thru Hole for PCB

SMB Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be jack or plug gender with 50 Ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder or solder; Body is brass.

QMA Female to N Male RF Coaxial Connector Adaptor

QMA adapters Features： Allow to interface QMA connectors with QMA, N or SMA connectors; Has female to male or male to female gender varieties; Quick disconnect version of the SMA adaptor and shares the same internal construction; Excellent performance up to 18GHz; Because of the innovative coupling mechanism, a 360-degree butt joint is maintained resulting in low RF leakage; QMA series offers a more convenient installation than SMA; The interface mates with a snap-on instead of a threaded coupling, has a significant time advantage.

433MHz 3dBi Wireless Omni Direction IPEX UFL Connector Clip-on Mount for Handheld Walkie-talkie Automobile Mobile Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

Straight 2.2-5 Female to 2.2-5 Female Connector Cable Assembly with RG402 Cable For 5G

2.2-5 Cable assembly Features： Can be combined with 4.3-10 , N or 2.2-5 connector; Body is right angle or straight connectors; Cable Can use flexible or corrugated cable.

SMA Female Straight Connector Solder Attachment Thru Hole for PCB

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

SMB Jack Male Straight Connector Solder Attachment Thru Hole for PCB

SMB Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be jack or plug gender with 50 Ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder or solder; Body is brass.

New QMA Female to N Male RF Coaxial Connector Adaptor

QMA adapters Features： Allow to interface QMA connectors with QMA, N or SMA connectors; Has female to male or male to female gender varieties; Quick disconnect version of the SMA adaptor and shares the same internal construction; Excellent performance up to 18GHz; Because of the innovative coupling mechanism, a 360-degree butt joint is maintained resulting in low RF leakage; QMA series offers a more convenient installation than SMA; The interface mates with a snap-on instead of a threaded coupling, has a significant time advantage.

433MHz 3dBi Omni Direction N Female Connector Pole Mount Fiberglass Antenna for Wireless Video Trunking System

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

RF Coaxial 2.92mm Male to 2.92mm Male Plug with Low Loss Flexible Cable Assembly

2.92mm Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm,3.5mm, SMP, or SMA connector; Body is all straight connectors; Cable Can use flexible, formable or semirigid cable.

SMA Female Straight Bulkhead Mount Connector Solder Attachment Thru Hole for PCB

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

SMB Jack Male 75ohm Straight Connector Solder Attachment Thru Hole for PCB

SMB Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be jack or plug gender with 50 Ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder or solder; Body is brass.

QMA Male to N Male RF Coaxial Connector Adaptor

QMA adapters Features： Allow to interface QMA connectors with QMA, N or SMA connectors; Has female to male or male to female gender varieties; Quick disconnect version of the SMA adaptor and shares the same internal construction; Excellent performance up to 18GHz; Because of the innovative coupling mechanism, a 360-degree butt joint is maintained resulting in low RF leakage; QMA series offers a more convenient installation than SMA; The interface mates with a snap-on instead of a threaded coupling, has a significant time advantage.

433MHz 3.5dBi Omni Direction SMA Male Connector Wall Mount Antenna for SCDMA Wireless Data Transmission System

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

Straight SMA Male Connector with RG316 Cable Assembly

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

RP SMA Female Straight Connector Solder Attachment End Launch for PCB

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

All products