Factory Supply antenna ,All Kinds Of Electronic Products

SMA Female Straight Bulkhead Connector Crimp Solder Attachment for LMR195 RG58 RG142 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

N Female to BNC Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

High Power 500W N Type Fixed Attenuator Male to Female DC-3GHz/4GHz 1-50dB Avaliable

N Type Attenuator Features： N connector input, out connector can be 7-16 DIN, N, SMA or TNC; Maximum frequency of 18 GHz; A male gender in and a female gender out; Attenuation values range from 1dB to 60dB.

2.4-5.8GHz 5dBi Wireless Omni Direction UFL IPEX Connector Clip-on Mount for Automobile Mobile Handheld Walkie-talkie Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

433MHz Electrodepot Unity Gain Omni Antenna with Magnetic Base and Male SMA Connector Impedance 50ohm

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

SMA Female Straight Connector Crimp Solder Attachment for RG58 RG303 RG141 LMR195 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

New N Female to BNC Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

5W 90db Step Attenuator Step Variable Attenuator N K-K 0-90db 50ohm

SMA Attenuator Features： SMA connector input, out connector can be N or SMA; Maximum frequency of 26GHz; A female gender in and a female or male gender out; Attenuation values range from 1dB to 60dB.

External Whip 2.4-5.8GHz 3dBi Omni Direction Terminal WiFi Antenna with SMA Male Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

2.4GHz 5.8GHz WiFi Omni Antenna with SMA Male Cable RG174

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

SMA Female Straight Connector Crimp Solder Attachment for RG316 RG174 RG188 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

N Female to BNC Female 4 Hole Flange Mount Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

5W 60db Step Key Press Attenuator N K-K 0-60db In 1dB Step

SMA Attenuator Features： SMA connector input, out connector can be N or SMA; Maximum frequency of 26GHz; A female gender in and a female or male gender out; Attenuation values range from 1dB to 60dB.

Screw Mount 2.4GHz 2.15dBi Omni Direction Mobile Terminal WiFi Antenna SMA Male Connector with RG174 Cable

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

GPS Active 42dB Antenna Compatible with Glonass SMA Male Cable with Magnetic Mount 3 Meters Wire RG174

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

SMA Female Waterproof Straight Bulkhead Connector Crimp Solder Attachment for RG316 RG174 RG188 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

Low Pim N Male to 7-16 DIN Male Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

5W 30db RF Step Press Coaxical Key Variable Adjustable Attenuator N K-K 0-30db In 1dB Step

SMA Attenuator Features： SMA connector input, out connector can be N or SMA; Maximum frequency of 26GHz; A female gender in and a female or male gender out; Attenuation values range from 1dB to 60dB.

2.4GHz 5.8GHz 5dBi Omni Direction WIFI WLAN Antenna SMA Connector Screw Mount with RG174 Cable

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

1W 50ohm DC-40GHz RF Terminator 2.92mm Male Termination Dummy Load

Features： High Reliable; Good Mechanical Performance; Wide Frequency Range from DC to 40GHz.

SMA Female Straight Connector Crimp Solder Attachment for LMR240 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

New Low Pim N Male to 7-16 DIN Male Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

100W 20dB RF Attenuator Low Pim 698-2700MHz RF Attenuator with 4.3-10 Female to Female Mini Din Connector

4.3-10 Attenuator Features： 4.3-10 connector input, out connector can be 4.3-10 or N; Maximum frequency of 18GHz; A male gender in and a female gender out; Attenuation values range from 1dB to 40dB.

2.4-5.8GHz 5dBi Wireless Omni Direction FAKRA Connector WIFI WLAN Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

2.4mm Male Termination Dummy Load 50ohm DC-40GHz RF Terminator

Features： High Reliable; Good Mechanical Performance; Wide Frequency Range from DC to 40GHz.

SMA Male Right Angle 4 Feet Connector Solder Attachment Thru Hole for PCB

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

Low Pim N Male to 7-16 DIN Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

50W 5dB RF Coaxial Attenuator Low Pim 680-3800MHz RF Attenuator with 4.3-10 Female to Female Mini Din Connector

4.3-10 Attenuator Features： 4.3-10 connector input, out connector can be 4.3-10 or N; Maximum frequency of 18GHz; A male gender in and a female gender out; Attenuation values range from 1dB to 40dB.

2.4GHz 3dBi Wireless Omni Direction N Type Connector WIFI WLAN Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

10DB HDTV Digital DVB-T Indoor Antenna Repalcemnet UHF VHF Dual Band Magnetic Base Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

RP SMA Male Right Angle Connector Crimp Solder Attachment for RG174 RG316 RG188 LMR100 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

New Low Pim N Male to 7-16 DIN Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

50W 10dB RF Coaxial Attenuator Low Pim 698-3800MHz RF Attenuator with 4.3-10 Female to Male Mini Din Connector

4.3-10 Attenuator Features： 4.3-10 connector input, out connector can be 4.3-10 or N; Maximum frequency of 18GHz; A male gender in and a female gender out; Attenuation values range from 1dB to 40dB.

2.4GHz 3-15dBi Outdoor Omni Direction N Female Connector Pole Mount Fiberglass Antenna for Wireless WLAN WIFI System

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

3G 4G GSM Omni Directional Spring Antenna with SMA Male Connector Magnetic Base LTE Bands 12 dBi Gain

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

SMA Male Right Angle Connector Crimp Solder Attachment for RG174 RG316 RG188 LMR100 Cable

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.

Low Pim N Female to 7-16 DIN Male Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

All products