B2B Sourcing Platformfor of bearing, Best Sale Hardware Products Sfyh.com

SA series Eccentric collar bearing insert

Eccentric collar bearing inserts are often used in combination with pillow blocks or other types of bearing housings. The eccentric collar allows for easy installation and adjustment within the housing.

6301-2RS Sealed Deep Groove Ball Bearing for Robust Medium-Duty Applications | 12×37×12 Mm

The 6301-2RS is a Double Rubber-Sealed, Medium Series Deep Groove Ball Bearing designed to deliver reliable performance and environmental protection in demanding conditions. Fitted with two integral rubber contact seals (2RS), it forms an effective barrier against contaminants such as dust, dirt, and moisture, while securely retaining lubricant within the bearing. With a 12 mm bore, 37 mm outer diameter, and a 12 mm width, this bearing offers an excellent balance of load capacity and compactness, making it ideal for medium-duty applications where sealing integrity is crucial.

UK series Adapter sleeve locking type insert ball bearings

The bearing comes with an adapter sleeve, which is a cylindrical sleeve that slides over a tapered shaft. The inner surface of the sleeve typically has a taper that matches the shaft's taper.

6207 Standard Deep Groove Ball Bearing for General Industrial Use | 35×72×17 Mm

The 6207 is a Single Row, Standard Series Deep Groove Ball Bearing designed for reliable performance in a wide array of industrial applications. As an open-type bearing without built-in seals or shields, it offers maximum versatility for custom lubrication and sealing arrangements. With a 35 mm bore, 72 mm outer diameter, and a 17 mm width, it provides an optimal balance of high load capacity, moderate cross-section, and excellent durability, making it a fundamental component in power transmission and rotating machinery.

POM pulley rowing machine seat roller wheel with bearings

Mechanical seat rollers are a key component widely used in mechanical seating products such as office chairs and car seats. It is installed at the bottom of the seat so that the seat can easily slide on the ground, providing a more flexible and convenient use experience.

6206-2RZ Non-Contact Sealed Deep Groove Ball Bearing for Efficient Operation | 30×62×16 Mm

The 6206-2RZ is a Non-Contact Rubber-Sealed, Standard Series Deep Groove Ball Bearing engineered to balance effective contamination protection with minimal friction. Equipped with two low-friction rubber seals (2RZ), it shields against dust and moisture while maintaining lower operating torque compared to contact seals. Featuring a 30 mm bore, 62 mm outer diameter, and a 16 mm width, this bearing is designed for applications requiring reliable environmental protection and energy-efficient performance in a medium-duty format.

Foot Mounted Pillow Block Bearings UCP201 UCP202 UCP203

UCP 200 Pillow Block Mounted Bearings offer performance superior to other similar products on the market. It's durable and non-perishable, which means less downtime and fewer replacements, saving you time and money. Custom aperture sizes available.

6205-2RS Sealed Deep Groove Ball Bearing for Versatile Industrial Use | 25×52×15 Mm

The 6205-2RS is a Double Rubber-Sealed, Standard Series Deep Groove Ball Bearing designed to deliver reliable performance in environments where contamination protection is essential. Featuring two effective rubber contact seals (2RS), it provides a dependable barrier against dust, moisture, and other airborne particles while retaining lubrication. With a bore of 25 mm, outer diameter of 52 mm, and width of 15 mm, this bearing offers a robust and compact solution for a wide range of applications requiring durability and sealed operation.

Single Direction Thrust Ball Bearings Used for Oil Drilling Machine

This one direction thrust ball bearing is also called a ball thrust bearing or a thrust deep groove ball bearing. These bearings consist of shaft washers, bearing races, and ball and cage assemblies. Thrust ball bearings have an open design and these balls make them suitable for high rotational speeds.

6203-2RZ Sealed Deep Groove Ball Bearing for Space-Optimized Designs & Precision Mechanisms | 17×40×12 Mm

The 6203-2RZ is a Double Rubber-Sealed Light Series Deep Groove Ball Bearing engineered for applications requiring effective sealing and reliable performance in limited spaces. Fitted with two low-friction rubber seals (2RZ) on both sides, it provides excellent protection against dust, moisture, and particulate ingress while retaining lubricant efficiently. With a 17 mm bore and a compact 12 mm width, this bearing is well-suited for small motors, precision gearboxes, and light industrial equipment where environmental resistance and smooth running are vital.

Bearing Factory Sale Miniature Axial Thrust Ball Bearing

The standout advantage of these miniature axial thrust ball bearings (F7-13M/F7-15M/F7-17M) lies in their versatile load-bearing capacity, offering options in material and design, while also providing precise axial positioning and the ability to handle directional loads efficiently, making them adaptable for various applications and installation conditions.

6204-2RS Sealed Deep Groove Ball Bearing for Durable Performance & Versatile Applications | 20×47×14 Mm

The 6204-2RS is a Double Rubber-Sealed Light Series Deep Groove Ball Bearing built to deliver reliable operation and contamination resistance in a wide range of mechanical systems. Fitted with two rubber contact seals (2RS) on both sides, it effectively prevents the entry of dust, dirt, and moisture while retaining lubrication for extended service intervals. With a 20 mm bore and a robust 14 mm width, this bearing is widely used in electric motors, industrial gearboxes, and machinery where consistent sealing and smooth rotational performance are required.

nylon ball bearing steel garage door rollers

The garage door rollers is made of nylon and metal material, high hardness and strong wear resistance,durable and long service life.

6205 Standard Deep Groove Ball Bearing for Robust Performance & Versatile Machinery | 25×52×15 Mm

The 6205 is a Standard Open Deep Groove Ball Bearing from the widely used 62 series, offering a balance of high load capacity and versatility for general industrial applications. Without integral seals or shields, this bearing provides maximum design flexibility and is commonly used in assemblies where external sealing is provided or the operating environment is clean. With a 25 mm bore, 52 mm outer diameter, and a 15 mm width, it serves as a fundamental component in motors, pulleys, and various mechanical drives requiring reliable and efficient operation.

PU Urethane Polyurethane Rubber Coated Bearing wheel

Polyurethane (PU) coated bearings have gained prominence in various industrial applications due to their unique set of properties, offering advantages in terms of durability, versatility, and performance.

7040 Series Angular Contact Ball Bearing | High Load Capacity Design

The 7040 Series is a robust Angular Contact Ball Bearing engineered to support substantial combined radial and axial loads in one direction. Featuring selectable contact angles that deliver optimal performance for specific needs, this series is built for applications demanding high rigidity, dependable precision, and stable operation in demanding conditions. It is an excellent choice for heavy-duty machine tool spindles, industrial pumps, gearboxes, and high-torque motor systems.

Single Row super precision Angular Contact Ball Bearings

Angular Contact Ball Bearings are designed to support bidirectional axial and radial loads on shafts. This is achieved through the contact angle of the ball with the inner and outer rings, usually 15 degrees, 25 degrees or 40 degrees. Smaller contact angles generally provide higher axial load carrying capacity, while larger contact angles provide higher rigidity and are suitable for high-speed applications.

Inch Rod Ends CM

Ball: AISI 52100 bearing Steel, heat treated, HRC56 min; Precision ground polished hard chromium plated Body: Carbon steel,clear Zinc plated. Sliding contact surfaces: Steel/Steel

7206 Series Angular Contact Ball Bearing | Versatile 30mm Bore Design

The 7206 Series is a dependable Angular Contact Ball Bearing, crafted to efficiently handle both radial and axial loads simultaneously in one direction. It offers selectable contact angles to suit specific load ratio requirements, providing a solid combination of load capacity and operational smoothness. Engineered for precise shaft guidance and reliable performance, it serves as an essential component in a wide array of applications including industrial motors, automotive systems, gearboxes, and general machinery.

Customized Nylon Roller With Bearing Plastic Pulley Wheels

Customized plastic pulleys with bearings, made of chromium steel and nylon, can be produced according to customer requirements. Bearings are widely used in sliding rolling doors and sliding rollers.

7218 Series Angular Contact Ball Bearing | Robust 90mm Bore Design for Industrial Loads

The 7218 Series is a durable and versatile Angular Contact Ball Bearing, developed to manage combined radial and axial loading in one direction effectively. Offering standard contact angle configurations to meet diverse requirements, it provides reliable shaft support and operational stability for medium-duty applications. This bearing is a dependable component in systems demanding robust performance, such as industrial gearboxes, heavy-duty fans, agricultural machinery, and general power transmission equipment.

Single Row Metric Tapered Roller Bearings 30202 30203 30204 30205 30206

Tapered roller bearings are mainly used to bear the combined load in radial and axial directions. The outer ring can be separated and assembled easily. The axial clearance and radial clearance can be adjusted.

7306 B Series Angular Contact Ball Bearing | 40° Contact Angle for Maximum Axial Rigidity

The 7306 B Series is a specialized Angular Contact Ball Bearing, defined by its steep 40° contact angle (B design), engineered to withstand exceptionally high axial (thrust) loads. This design prioritizes supreme axial stiffness and minimal shaft displacement under heavy thrust conditions. It is an optimal solution for precision applications where axial load dominance requires maximum rigidity and stability, such as in heavy-duty machine tool components, high-thrust gearboxes, and industrial pump systems.

LM11749/LM11710 Single Row Inch Size Tapered Roller Bearings

Single row tapered roller bearings, inch sizes, are designed to accommodate combined radial and axial loads and provide low friction during operation. The inner ring, with rollers and cage, can be mounted separately from the outer ring. These separable and interchangeable components facilitate mounting, dismounting and maintenance. By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.

7309 Series Angular Contact Ball Bearing | 15°-40° Contact Angle | Heavy-Duty Design

The 7309 Series is a heavy-duty Angular Contact Ball Bearing engineered to handle substantial combined radial and axial loads. Providing selectable contact angles to meet specific application demands, this series is built for high rigidity, reliable performance under significant stress, and durable operation in tough industrial settings. It is a robust and dependable choice for demanding applications such as industrial gearboxes, heavy pump systems, and power transmission units.

Heavy-duty Double Row Tapered Roller Bearings 352208 352210 352212 352213 352214 352215

Double row bearings offer nearly twice the capacity of the equivalent single row bearing, and are therefore used in more heavily loaded applications. The plain outer race enables this bearing to be used in a 'floating' position ro permit thermal expansion. It can replace a single row plain cup type tapered roller bearing when additional load capacity is required.

R144 Series Deep Groove Ball Bearing | Miniature 3.175mm Bore Design

The R144 Series is a precision miniature deep groove ball bearing, designed primarily to accommodate radial loads with the ability to support light axial loads in both directions. Characterized by its extremely compact dimensions, this bearing ensures smooth, low-friction rotation and high running accuracy. It is engineered for applications where space is at a premium and reliable performance is critical, making it ideal for small precision motors, sensitive instruments, medical devices, and miniature drive systems.

Taper Roller Wheel Bearing For Car Truck Motorcycle Auto Parts

Wheel roller bearings are long-lasting and durable, providing reliable wheel hub support for vehicles such as cars, trucks and motorcycles.

R144-ZZ Shielded Miniature Deep Groove Ball Bearing for Precision Applications | 3.175×6.35×2.779 mm

The R144-ZZ is a Double Metal Shielded Miniature Deep Groove Ball Bearing engineered for high-speed precision equipment where low friction and reliable operation are essential. Fitted with two non-contact metal shields (ZZ) on both sides, it provides effective protection against dust and larger particles while maintaining minimal torque and allowing high rotational speeds. With a 3.175 mm bore and ultra-compact cross-section, this bearing is ideal for small motors, instrumentation, robotics, and miniature drives operating in clean environments.

Nylon Pulley U Groove Sliding Gate POM Wheel Bearings

The nylon pulley with a U-groove is designed to be part of a sliding gate system, and the POM wheel bearings contribute to the efficiency and durability of the pulley assembly. This combination helps ensure smooth gate movement and reduces wear and tear on the components over time.

6313-2Z Shielded Deep Groove Ball Bearing For Heavy-Duty Industrial Applications | 65×140×33 mm

The 6313-2Z is a Double Metal Shielded Medium Series Deep Groove Ball Bearing engineered to deliver robust and reliable performance in demanding industrial environments. Fitted with two non-contact metal shields (2Z) on both sides, it provides effective protection against larger contaminant particles while maintaining minimal friction for higher speed operation. With a 65 mm bore and substantial cross-section, this bearing is ideally suited for electric motors, pumps, industrial gearboxes, and heavy machinery operating in clean to moderately contaminated conditions.

Wholesale POM Drawer Roller With Screw M6

POM Drawer Roller with Screw M6 is a versatile and efficient solution tailored to meet your precise needs in furniture and cabinet applications. Crafted with precision engineering and high-quality materials, these drawer rollers are designed to deliver exceptional performance, longevity, and ease of installation.

6224-2Z Shielded Deep Groove Ball Bearing For Heavy Industrial Applications | 120×215×40 mm

The 6224-2Z is a Double Metal Shielded Single Row Deep Groove Ball Bearing engineered to deliver dependable performance in heavy-duty industrial machinery and power transmission equipment. Fitted with two non-contact metal shields (2Z) on both sides, it offers effective protection against larger particulate contamination while maintaining minimal frictional resistance for efficient operation. With a 120 mm bore and robust cross-section, this bearing is ideally suited for large electric motors, industrial pumps, heavy fans, and processing equipment operating in clean to moderately contaminated environments.

Taper Roller Bearing Cup And Cone Assembly 11590/11520 LM11749 LM11710

In tapered roller bearings, the outer ring is sometimes called the "outer ring" and the inner ring assembly is sometimes called the "inner ring." These are sometimes called "sub-units" and the individual bearings are called "units".Our tapered roller bearings are available in a variety of designs and can be customized to your specific speed, load, contamination, temperature or vibration conditions.

6022-2RS Sealed Deep Groove Ball Bearing For Industrial Power Transmission | 110×170×28 mm

The 6022-2RS is a Double Rubber-Sealed Single Row Deep Groove Ball Bearing engineered to deliver reliable, long-lasting performance in industrial power transmission and processing equipment. Equipped with two synthetic rubber contact seals (2RS) on both sides, it provides excellent protection against moisture, dust, and fine particulate contamination, effectively retaining lubrication and preventing premature wear in demanding operating conditions. With a 110 mm bore and optimized cross-section from the 60 series extra-light designation, this bearing is well-suited for electric motors, pumps, gearboxes, and industrial machinery operating in moderately contaminated environments.

POM Plastic Sliding Door Window Roller Wheel Bearing

The choice of high-quality raw materials for both bearings and sliding rollers, combined with expert engineering, ensures our POM roller wheel bearings possess a high load capacity and deliver a seamlessly smooth running experience.

6908-2RS Sealed Deep Groove Ball Bearing for Thin-Section Applications & Precision Drives | 40×62×12 Mm

The 6908-2RS is a Double Rubber-Sealed Extra-Light Series Deep Groove Ball Bearing engineered for applications demanding minimal cross-section with reliable contamination protection. Featuring two rubber contact seals (2RS) on both sides, it effectively shields against dust, moisture, and fine particles while preserving internal lubrication. With a 40 mm bore and a slim 12 mm width, this bearing is an excellent choice for compact machinery, precision instruments, and light-duty drive systems where sealing integrity and space efficiency are equally important .

Plastic Nylon Pulley Wheel Sliding Window Roller Bearing

Our Plastic Nylon Pulley Wheel Bearing stands out for its perfect design, offering a combination of easy operation, low noise, and impressive durability. Whether you are seeking functionality in furniture or a reliable solution for sliding doors and windows, this roller bearing is versatile and adaptable to various scenarios.

6210-2Z Deep Groove Ball Bearing For Industrial Power Transmission | 50×90×20 mm

The 6210-2Z is a versatile, single-row deep groove ball bearing engineered for a wide spectrum of industrial machinery requiring reliable performance under moderate to high loads. Featuring dual Z-type metal shields, this bearing provides effective protection against the ingress of dust and solid contaminants while maintaining low frictional torque. With a 50 mm bore and a robust 20 mm width, it is the preferred choice for electric motors, pumps, and gearboxes where durability and contamination resistance are critical for extended service life.

CSK35PP One Way Clutch Ball Bearing 35x72x17mm

The CSK35PP One Way Clutch Ball Bearing is a precision-engineered component designed to facilitate unidirectional motion in mechanical systems. With its advanced design and robust construction, this clutch ball bearing offers reliable performance across various industrial applications.

All products