ETU-Link Technology CO ., LTD.-sfyh.com

LC/PC-LC/PC MM DX OM2 50/125um PATCH CORD

LC/PC-LC/PC Duplex OM2 50/125 Multi-mode Fiber Patch Cable

8 Fiber MPO(Female)-MPO(Female) 9/125 Single-mode Fiber Optic Cable

12 Fiber MPO(Male)-MPO(Male) 9/125 Single-mode Fiber Optic Cable

12 Fiber MPO(Female)-MPO(Female) 9/125 Single-mode Fiber Optic Cable

8 Fiber MPO(Female)-MPO(Female) OM3 50/125 Multi-mode Fiber Optic Cable

12 Fiber MPO(Male)-MPO(Male) OM3 50/125 Multi-mode Fiber Optic Cable

12 Fiber MPO(Female)-MPO(Female) OM3 50/125 Multi-mode Fiber Optic Cable

8 Fiber MPO-4LC Duplex OM3 Multi-mode Fiber Optic Harness Fan-out/Breakout Cable

12 Fiber MPO(Male)-6LC Duplex OM3 Multi-mode Fiber Optic Harness Fan-out/Breakout Cable

12 Fiber MPO-6LC Duplex OM3 Multi-mode Fiber Optic Harness Fan-out/Breakout Cable

CWDM MUX/DEMUX

CWDM MUX/DEMUX (Coarse Wavelength Division Multiplexer/Demultiplexer) is a flexible and low-cost solution that enables the expansion of existing fiber capacity

DWDM Mux/Demux

DWDM MUX DEMUX Modules with 50GHz/100GHz/200GHz channel spacing can be used to combine or separate wavelength channels at standard ITU grid.

The pigtails including single-mode, multimode and 10G 50/125um OM3 types, simplex fiber, 4 fibers, 6 fibers, 8 fibers, 12 fibers, 24 fibers, 48 fibers and so on. These fiber pigtails can be with fan-out kits and full compliant to Telcordia, EIA/TIA and IEC standards.

Fiber Adapter

SC, FC, ST, LC, MU, MTRJ, MPO, MTP, E2000 both in single mode and multimode, simplex and duplex types

IP67 LC-LC Optical patch cord

No brief introduction

IP67 MPO-MPO Optical patch cord

IP67 Optical adapter

No brief introduction

IP67 Optical patch cord

No brief introduction

SFP Media Converter

ETU-Link series Gigabit Ethernet SFP fiber media converters bridge the gap between copper and fiber infrastructures. The SFP fiber media converters are designed for maximum convenience for fiber to copper Ethernet conversion applications which require flexibility in transmission rates, working distances, and fiber network types which can be realized by simply changing the hot-plug-and-play SFPs.

10/100/1000M Dual Fiber Media Converter

The ETU-Link of Ethernet media converters with internal power supply are 10/100/1000Mbps auto-sensing and utilize fiber optics to extend the physical distance range of typical Ethernet links (100m) to 1Km max. on MMF and 100Km max. on SMF.

10/100/1000M Single Fiber Media Converter

The OM510-GE series, the Gigabit Ethernet media converters, featuring 1-fiber transmission with Wavelength Division Multiplexing (WDM) technology, utilize fiber optics to extend the physical distance range of typical Ethernet link to 20km-100km. It’s often applied in school, cyber bars, offices, and telecommunication networks.

1000M Dual Fiber Media Converter

The EM-1000 series, the 1000M media converter with external power supply, utilize fiber optics to extend the physical distance range of typical Ethernet links (100m) to 5Km max. on MMF and 120Km max. on SMF.

10/100M Dual Fiber Media Converter

The EM-100 series of Ethernet media converters with external power supply are 10/100Mbps auto-sensing and utilize fiber optics to extend the physical distance range of typical Ethernet links (100m) to 5Km max. on MMF and 100Km max. on SMF.

10/100M Single Fiber Media Converter

The EM-100-BS series, the fast Ethernet media converters, featuring 1-fiber transmission with Wavelength Division Multiplexing (WDM) technology, utilize fiber optics to extend the physical distance range of typical Ethernet link to 20km-100km. It’s often applied in school, cyber bars, offices, and telecommunication networks.

1000M Single Fiber Media Converter

The EM series, the Gigabit Ethernet media converters, featuring 1-fiber transmission with Wavelength Division Multiplexing (WDM) technology, utilize fiber optics to extend the physical distance range of typical Ethernet link to 20km-100km. It’s often applied in school, cyber bars, offices, and telecommunication networks.

40G QSFP+ AOC

Description: 40Gb/s QSFP+ PSM Active Optical Cable,applications:Infiniband Connectivity SDR/DDR/QDR, 10/40 Gigabit Ethernet, 2/4/8 Gbps Fiber Channel, Data Centers and Storage Arrays.

40G QSFP+ to 4XSFP+ AOC

QSFP+ (Quad Small Form-factor Pluggable Plus) copper direct-attach cables are suitable for very short distances and offer a highly cost-effective way to establish a 40-Gigabit link between QSFP+ ports of QSFP+ switches within racks and across adjacent racks.

40G QSFP+ Active Optical Cable to 4x double LC connector

The ETU-link EQA4X-343LCDxx is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Active Optical Cable (AOC) to 4× double LC connect Cable break-out solution. This Breakout cable is intended for 40G to 4× 10G applications.

10G SFP+ AOC

Description: Compliant to SFF-8431 SFP+ Multi‐Source Agreement 10Gb/s SFP+ Active Optical Cable length up to 300meter on OM3 MMF No cleanliness issue in optical connector. Cost-optimized Less than 0.9W(Each end consumption) Gigalight currently offers cable in l

100G QSFP28 AOC

Description: 100Gb/s QSFP28 Active Optical Cable,applications:Infiniband Connectivity SDR/DDR/QDR, Data Centers and Storage Arrays.

25G SFP28 Active Optical Cable

Description: 25Gb/s SFP28 PSM Active Optical Cable,applications:Infiniband Connectivity SDR/DDR/QDR, 25 Gigabit Ethernet, 2/4/8 Gbps Fiber Channel, Data Centers and Storage Arrays.

10G SFP+ DAC Passive cables

Description: The ETU-Link SFP+ Passive copper cables are compliant with SFF-8431 and provide connectivity between device using SFP+ ports.

40G QSFP+ to SFP+ DAC cables

Description: The ETU-Link hybrid QSFP+ to 4x SFP+ breakout passive copper cables are 40Gbps to 10Gbps cable assemblies. The QSFP+ to 4x SFP+ cables provide 40GbE systems the ability to connect to 10GbE switches or adapter cards.

100G QSFP28 DAC

Description: cost effective I/O solutions for LAN,HPC and SAN.meet,exceed 100 Gigabit Ethernet, InfiniBand EDR and temperature requirements for performance and reliability.compliant with SFF-8436 specifications provide connectivity between devices using QSFP ports.

40G QSFP+ DAC Direct Attach Cables

Description: The ETU-Link SFP+ Passive copper cables are compliant with SFF-8431 and provide connectivity between device using QSFP+ ports.

25G SFP28 Passive Copper Cable Assembly

Description: The ETU-Link SFP28 Passive copper cables are compliant with SFF-8431 and provide connectivity between device using SFP28 ports.

40G QSFP+ Active Copper Cable

Description: The ETU-Link 40G QSFP+ Active Copper Cbale is compliant with SFF-8436 and an assembly of 4 full-duplex lane, where each lane is up to 10Gb/s per lane.

1.25G DWDM 80KM SFP Transceiver

This is a SM module,the Data-rate of 1.25Gbps operation and the wavelength is 1528.77~1563.86nm, maximum transmission distance is up to 80KM.

GE-100FX Spring-Latch SFP Transceiver 2KM

ETU-LINKs ES3112-3LCD2 Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), and are designed for SGMII MAC interface to 100BASE-FX (The SGMII MAC Interface implements a modified 1000BASE-X Auto-Negotiation to indicate link, duplex, and peed to the MAC).

GE-100FX Spring-Latch SFP Transceiver 2KM SMF

ETU-LINKs ES3112-3LCD2 Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), and are designed for SGMII MAC interface to 100BASE-FX (The SGMII MAC Interface implements a modified 1000BASE-X Auto-Negotiation to indicate link, duplex, and peed to the MAC).

Company profile

All products