Company profile

All products

Box Type Fixed AC Metal Enclosed Switch Equipment

Box type fixed AC metal enclosed switch equipment, is a kind of intelligent, environmental protection, full working condition equipment, with high reliable operation safety, It is one of the most commonly used devices in urban ring networks. Use in electrical power system with three-phase frequency 50/60 Hz, rated voltage of 12kV. It is used for receiving and distributing electric energy in ring and segmented power supply systems. With full insulation, long life, maintenance free, small space, safe and reliable, not affected by the environment and other characteristics.

KYN44-12 High Voltage Switchgear

KYN44-12 type armored removable indoor AC metal-enclosed switchgear and control equipment are suitable for three-phase AC 50Hz/60Hz, rated voltage 12kV and below single bus and single bus section system, as receiving and distributing electric energy to control, protect, monitor and measure power circuits.

Fit(XGN86)-12 SF6 Ring Main Unit

Fit(XGN86)-12 SF6 ring main unit use SF6 as the insulating medium, a fully insulated and fully enclosed ring main unit. All high-voltage charged parts are fully insulated and sealed. From the outside of the switch cabinet, the safety performance is higher, with compact structure, small size, maintenance-free, not affected by high altitude, pollution, small animals and chemical substances and other external environment. Strong insulation performance and arc extinguishing ability, with reliable structure and excellent performance. Also known as SF6 inflatable cabinet, C-GIS and so on.

KYN44A-40.5 high voltage switchgear

KYN44A-40.5 armored removable AC metal-enclosed switchgear is suitable for three-phase AC 50Hz/60Hz, 40.5kV single bus and single bus segmented power system, mainly used in power plants, substations, industrial and mining enterprises, high-rise buildings, etc. It is used for receiving and distributing 35kV network electric energy in power transformation and distribution, and controls, protects and monitors the circuit. It meets the requirements of IEC60298, GB3906, DL404 and other standards, and has a complete "five prevention" function.

Metal-enclosed Switchgear KYN44-12

Metal-enclosed Switchgear KYN44-12 comply with the international standard IEC62271-200, Chinese National Standard GB3906 and Electric Power Industry standard DL/T404 and other relevant standards.

12kV High Voltage Vacuum Switch Cabinet

This fixed type high voltage vacuum switch cabinet are suitable for three-phase AC 50Hz/60Hz, rated voltage 12kV and below single bus and single bus section system, as receiving and distributing electric energy to control, protect, monitor and measure power circuits.

Box type AC Metal Closure Ring Network Switchgear Equipment

This box type AC Metal Closure Ring Network Switchgear Equipment are suitable for three-phase AC 50Hz/60Hz, rated voltage 12kV and below single bus and single bus section system, as receiving and distributing electric energy to control, protect, monitor and measure power circuits.

11HV Ring Network Switching Equipment

This box type HV Ring Network Switching Equipment are suitable for three-phase AC 50Hz/60Hz, rated voltage 12kV and below single bus and single bus section system, as receiving and distributing electric energy to control, protect, monitor and measure power circuits.

Fixed Type High Voltage Distribution System

This fixed type high voltage distribution system are suitable for three-phase AC 50Hz/60Hz, rated voltage 12kV and below single bus and single bus section system, as receiving and distributing electric energy to control, protect, monitor and measure power circuits.

Fixed Type High Voltage Switchgear

This fixed type high voltage switchgear are suitable for three-phase AC 50Hz/60Hz, rated voltage 12kV and below single bus and single bus section system, as receiving and distributing electric energy to control, protect, monitor and measure power circuits.

Fit-Series GIS 12kV Outdoor

Fit-Series GIS 12kV Outdoor are widely used in urban ring network power supply systems due to their small space occupation, long life, maintenance-free, safe and reliable characteristics.

SF6 Arc Resistant 10kV RMU

SF6 Arc Resistant 10kv RMU can be equipped with SF6 ring main unit, environmental gas (N2) ring main unit, solid insulation ring main unit, and atmospheric air ring main unit. Automatic laser welding and helium leak detection equipment are used to ensure that the gas cabinet protection level reaches IP67.

Air Insulated GIS SF6 substations

Air Insulated GIS SF6uses sulfur hexafluoride as the insulating medium, and is fully insulated and fully enclosed in a common box type. All high-voltage live parts are fully insulated and sealed, and the safety performance is higher from the outside of the switch cabinet. It has a compact structure, small size, maintenance-free, and is not affected by high altitude, pollution, small animals, chemical substances and other external environments.

Green Outdoor Gas Insulated SF6 Switchgear

Green Outdoor Gas Insulated SF6uses sulfur hexafluoride as the insulating medium, and is fully insulated and fully enclosed in a common box type. All high-voltage live parts are fully insulated and sealed, and the safety performance is higher from the outside of the switch cabinet. It has a compact structure, small size, maintenance-free, and is not affected by high altitude, pollution, small animals, chemical substances and other external environments.

12kV Atmospheric sealed air-insulated Ring Network Switchgear Cabinet HV

The 12kV atmospheric sealed air-insulated ring network cabinet switchgear is a new generation of distribution network switchgear. The main insulation medium is natural air, which does not require inflation, pressure, and leakage risk. The main bus expansion method is divided into side expansion and top expansion.

IP4X HV/LV/MV electrical metal enclosure power distribution switch Boxes

IP4X OEM ODM Customized HV/LV/MV Power Distrition Box Electrical Metal Enclosure Switch Boxes, this KYN44-12 type armored removable indoor AC metal-enclosed switchgear and control equipment are suitable for three-phase AC 50Hz/60Hz, rated voltage 12kV and below single bus and single bus section system, as receiving and distributing electric energy to control, protect, monitor and measure power circuits.

Outdoor waterproof electric power supply distribution switch boxes KYN44

This type Waterproof Electric Switch Box Outdoor Power Supply Distribution Boxes KYN44-12 are suitable for three-phase AC 50Hz/60Hz, rated voltage 12kV and below single bus and single bus section system, as receiving and distributing electric energy to control, protect, monitor and measure power circuits.

High Voltage 24kV Outdoor Control and Protection Metal Clad Switchgear

KYN44-24 type armored removable indoor AC metal-enclosed switchgear and control equipment are suitable for three-phase AC 50Hz/60Hz, rated voltage 24kV and below single bus and single bus section system, as receiving and distributing electric energy to control, protect, monitor and measure power circuits.

XGN86 Environmental N2 RMU T630 Switchgear Cabinet

XGN86 Environmental N2 RMU T630 Switchgear Cabinet is filled with nitrogen gas, which does not emit any toxic substances, is safer and environmentally friendly, and meets the needs of miniaturized space. Suitable for various power distribution systems-including extremely harsh environmental conditions, such as: user substations, power systems and public facilities substations and opening and closing stations, industrial wind power stations, high-rise buildings, airports, subway stations, port facilities .

Drawer-type Enclosed Low Voltage Switchgear

Drawer-type Enclosed Low Voltage Switchgear, AC 50/60 Hz and rated working voltage 380 ~ 680V,Low voltage distribution system as the receiving point, feed, busbar, lighting, motor control and power compensation.

GCS Drawer-type Enclosed Low Voltage Switchgear

GCS Drawer-type enclosed low voltage switchgear,with three-phase AC frequency 50 (60) Hz, rated working voltage 380V (400), (600), rated current 4000A and below.A complete set of indoor low-voltage distribution equipment for power generation, power distribution in power supply system, centralized control of motor, and no power compensation.

GGD Fixed enclosed low-voltage switchgear assembly

GGD type fixed enclosed low-voltage switchgear is suitable for the power station, substation, industrial and mining enterprises and other power users. AC 50/60 Hz, rated working voltage to 660V, rated working current to 3150A. As power conversion, distribution and control for power, lighting and distribution equipment in a 50kA power distribution system.

MNST Drawer-type enclosed low-voltage switchgear

MNST Drawer-type enclosed low-voltage switchgear,three-phase AC frequency 50/60 Hz, rated working voltage 380V (400), (660), rated current is 4000A and below.As a complete set of indoor low-voltage power distribution device and motor centralized control, no power compensation in power generation and power supply system.

Low Voltage Substation Switchgear

Our low-voltage switchgear equipment covers GGD, GCK, GCS, GGJ, GDF fixed partition, MNST, 8PT Siemens authorization, XL-21 power cabinet, XL distribution box, XM lighting distribution box, XC metering box, JP low-voltage integrated distribution box , XFW low voltage cable branch box, DXW terminal box.

Rolling plant Substation LV Switchgear

Rolling plant Substation LV Switchgear suitable for rolling plant Substation LV Switchgear. Our low-voltage switchgear equipment covers GGD, GCK, GCS, GGJ, GDF fixed partition, MNST, 8PT Siemens authorization, XL-21 power cabinet, XL distribution box,etc.

Removable AC outdoor switchgear

Our low-voltage switchgear equipment covers GGD, GCK, GCS, GGJ, GDF fixed partition, MNST, 8PT Siemens authorization, XL-21 power cabinet, XL distribution box, XM lighting distribution box, XC metering box, JP low-voltage integrated distribution box , XFW low voltage cable branch box, DXW terminal box.

Withdraw the enclosed low-voltage switchgear

Withdraw the enclosed low-voltage switchgear, suitable for AC 50Hz and 60Hz, rated working voltage 380~680V low-voltage power distribution system as receiving point, feeder, bus tie, lighting, motor control and power compensation, it contains PC and MCC can be designed as a fixed cabinet and drawer cabinet hybrid system to meet different power supply and distribution needs.

LV Switchgear GCS Power Distribution

LV Switchgear GCS Power Distribution,with three-phase AC frequency 50 (60) Hz, rated working voltage 380V (400), (600), rated current 4000A and below.A complete set of indoor low-voltage distribution equipment for power generation, power distribution in power supply system, centralized control of motor, and no power compensation.

Industrial Factory Power Distribution Unit

GGD type Power Distribution Unit suitable for the power station, substation, industrial and mining enterprises and other power users. As power conversion, distribution and control for power, lighting and distribution equipment in a 50kA power distribution system.

Steel Mills Transformer Power Control Cabinet GCK

GCK type switchgear is suitable for steel mills melting & rolling shop Power Control Cabinet, also for the transformer and other power users. AC 50/60 Hz, rated working voltage to 660V, rated working current to 3150A. As power conversion, distribution and control for power, lighting and distribution equipment in a 50kA power distribution system.

Electrical power distribution system

Ashare electrical power distribution system, include high voltage switchgear and low voltage switchgear system, are suitable for Industrial & Mining Enterprises,Urban Residential Areas,High-rise buildings,Substation,New Energy, Chemical,Industrial,Airports,Hospitals,Schools,Shopping Malls,Railways,Highway,Metro,Tunnels,Steel Mills &Other power systems.

VB5(ZN21B) vacuum circuit breaker

VB5(ZN21B) vacuum circuit breaker is based on the introduction of Belgium EIB vacuum circuit breaker technology products, after several years of technical research and process exploration, put into mass production in 1993. VB5(ZN21B) and its series products have excellent advancement and reliability. Rated frequency50/60 Hz,Rated voltage 12kV.

10kV Vacuum Circuit breaker VB5

VB5 (ZN21B) 10kV vacuum circuit breaker has excellent performance in occasions that require frequent operation and need to break short-circuit current. It fully meets the requirements of automatic reclosing and has extremely high operational reliability and service life.

24kV Indoor Vacuum Circuit breaker

24kV Indoor Vacuum Circuit breaker is based on the introduction of vacuum circuit breaker technology from Belgium EIB in 1989. After several years of technical research and technological exploration, it was put into mass production in 1993.

High Voltage 40.5kV AC Vacuum Circuit Breaker

VB5(ZN21D) indoor high-voltage AC vacuum circuit breaker is an indoor high-voltage switchgear with rated voltage of 40.5kV and three-phase AC 50/60Hz. It can be used as the control and protection of electrical equipment in industrial and mining enterprises, power plants and substations, and it is suitable for frequent operation.

Indoor Vacuum Circuit breaker VB5-Small Type

VB5 vacuum circuit breaker with rated frequency 50/60 Hz,mechanical lifemore than 20000 times

Switchgear Components Breaker VS1

Switchgear components breaker VS1 typeis suitable forthree-phase AC 50Hz and 60Hz indoor high voltage switchgear, can be used for industrial and mining enterprises, power plants and substations as electrical equipment control and protection, suitable for frequent operation place.

ZW8/630 Outdoor High Voltage Vacuum Circuit Breaker with electric Column isolation switch

ZW8/630 outdoor high voltage vacuum circuit breaker is suitable for 50Hz three-phase power system, mainly used for breaking and closing the load current, no-load current and short-circuit current of the urban 10kV power grid. It can also be used as a sub-switch for rural power grids and small power systems. It is an updated product for urban and rural power grids and rural oil-free power systems.

630A/1250 High Voltage Handcart 10kV Vacuum Circuit breaker

VS1 indoor high-voltage vacuum circuit breaker is an indoor switchgear with a three-phase AC 50Hz rated voltage of 12kV power system. It is used as a protection and control unit for power grid equipment and industrial and mining enterprise power equipment. It is suitable for places requiring frequent operation under rated working current, or multiple interruption of short-circuit current.

YB Series Pre-installed Substation

YB series pre-installed substations are applicable to power consumer such as metro, airport, port, station, industrial and mining enterprises and all kinds of public buildings (such as hotels, hospitals, high-rise buildings, stadiums and gymnasiums).

Showing 1 to 2 of 2 (1 Pages)

click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.