Industrial and Commercial Air-cooled Condensing
Parameters:
Cooling capacity：25kw ~ 1600kw
Airflow range：2692m3/h ~ 395781m3/h
Features:
1. Perfect airflow design: reasonable fan nozzle design can greatly improve air
fluidity and reduce noise.
2. Efficient heat transfer copper tube: high
heat transfer efficiency, and reduce the refrigerant in the coil pressure drop.
3. Efficient fan: it can reduce the energy
consumption of the fan while obtaining large heat exchange. Meanwhile, the fan
has stable operation and long service life.
Installation and maintenance
1. It can be installed in the
roof of the building or other well-ventilated environment without additional
cooling water system;
2. It is recommended to use
multiple units in parallel during transportation, lifting and installation;
3. The unit should be kept dry
and ventilated, and the surrounding air should not contain corrosive
substances, so as to avoid close proximity to chimneys, generators, boilers,
etc. where acid gas or heat is easily generated;
4. In order to prevent the
bottom of the unit from rusting, it is better to use the cross steel frame to
support the bottom of the unit during installation, so that the unit is not
less than 20cm away from the ground;
5. The inlet and outlet of the
cold (hot) water pipe and the front and rear nozzles of the cold (hot) water
pump need to be equipped with shockproof soft joints. Gate valve thermometer,
water pressure gauge, heat exchanger outlet pipe side water flow switch, water
pump inlet side filter and other auxiliary devices;
6. When configuring the power
cord, please select a wire with a large cross-sectional area, so that the power
flow of the power cord is not less than 20%.
Contact
us:
Vincent Lau
Tex : +86 -20-62266755 ext 624| Fax: +86
-20-62266081
Mobile/WhatssApp/wechat: +8613570527221
E-mail: Vincent@hstars.com.cn
