Anechoic Test Laboratory for HVAC Products

The anechoic room includes the anechoic room (with or without theair conditioning) and the semi anechoic room (with or without the airconditioning). it is an important test lab for the sound test of the airconditinoner, the electrical products, and the electronic products.

Li-ion Battery Tester Equipment and Test Equipment For Li-ion Cylindrical Cell Battery

8 channels battery tester for coin cell

Test Bar

Conform to IEC61032 Test probe 14

Air Flow Measurement Device

The Air flow measurement device is used for measuring the air volume of the fan,blower or other products such as AHU etc.

Popular Battery Test Battery Cell Charge and  Discharge  Tester for Cylinder Battery

8 channels battery tester for coin cell

5V50ma Coin Cell Battery Capacity Tester

8 channels battery tester for coin cell

Ozone and TOVC and Air Purifier Test Room

The Ozone,TVOC&Air Purifier Test Room includes the ozone content ratio test room,the TVOC emission test room,the air purifier test room,and the air filter test room.

Test Sphere Φ50 mm with Handle

ZLT-I01, this probe is conform to IEC61032 test probe A and IEC60529 IP1 and other standard. Without dynamometer, model ZLT-I01 With dynamometer 50N±5N, model ZLT-I01T

Battery Short Circuit Tester

Walk-in Type High/Low Temperature Chamber

The Walk-in Type High/Low Temperature Chamber is used for simulating test environment with different temperature and humidity.The temperature range can be designed from -40℃~80℃,while humidity can be designed from20~ 9 5 %R.H.

Test Wire

Wire :Ø0.5mm , Conform to IEC61032 Test probe17. The handle is made of nylon,tip is made of hardened steel.

8 Channel Battery Analyzer with Laptop & Software for All Rechargeable Cells

Solar Collector Test Laboratory

The solar power product test facility includes the solar water heater test facility, the solar heat concentrator test facility, and the photonvoltaic panel test facility.

Children Finger Probe B

Small finger probe: Ø8.6mm. Conform to IEC61032 Test probe 18

15V Battery Pack Tester Equipment for Charge and Discharge

Air Leakage Test Device for Air valve

Air leakage test device is used for testing the air leakage rate of the products such as the industrial air valve.

Children Finger Probe A

Small finger probe: Ø5.6mm. Conform to IEC61032 Test probe 19

Lithiun ion Battery Short Circuit Tester for Laboratory Research

Special and High Accurate Air Conditioning System

It includes the air conditioning systems used in museum,hospital,or used for keeping the valuable antique and documents etc.

Test Rod

Model ZLT-I14 Rod:Ø25mm, 80mm long, interchangeable metal or Delrin probe ,Conform to IEC61032 Test probe 31.

Test Thorn Probe

Model: ZLT-I16 For testing accessibility in appliances with visibly glowing heating elements. Also for testing parts supporting such elements. Complies with IEC61032 Test probe 41, IEC60335-1

Heat Roller Press Machine for Battery Electrode Calendering

LIO-DR-H150-300 Lab Roll Press Machine is a compact precision Roll to roll Heat Press Machine . It has dual rollers of 150mm dia. x 300mm width and dual grade micrometer.

Test Hook

Model: ZLT-I18 Test Hook complies with IEC60065 figure 4

Lab Research Battery Heat Roller Press Machine for Sale

Lab research battery heat roller press machine for battery electrode pressing.

Coax Test Plug Probe

Model: ZLT-I19 For mechanical tests on antenna coaxial sockets, according to IEC60065 Figure 9

Hot Roll Press Machine for Battery Electrode

This type roll press machine  has dual rollers of 150mm dia. x 200mm width and dual grade micrometer.

Test Probe with Force

Model: ZLT-I20 Gauge:3mm wide,1mm thick,80mm long, 20N force. Conform to IEC60884-1 Figure 9.

Roll to Roll Calender Machine for Lithium ion Battery Electrode

This machine is a automatic roll to roll press machine for battery electrode.

Lab Compact Presicion Battery Hot Roller Press Machine

This machine is a automatic roll to roll press machine for battery electrode.

Test Finger Nail

Model: ZLT-I22 Complies with most Standards， including IEC60335 Figure 7 and UL 1025/1278/507 Standards.

Small Lab Calender Machine for Lithium Battery Electrode Pressing

Test Probe A

Model: ZLT-I23A Required by IEC60745-2-5 figure 105 and other standards, Ø 12 mm, 50 mm long. .

Small Vacuum Chamber Machine for Laboratory Usuage

Test Pin Probe

Model: ZLT-I24 Φ1mm,20mm long, according to IEC60065 clause 9.1.4

Split Test Cell for Lithium ion Coin Cell Battery

Test Sphere 75MM without Handle

Model: ZLT-P02 Confirm to the IEC60335 2 24 clause21.102.

Battery Electrode Calendering Machine of Lithium Battery Assembly Line

Scraatching Pin Probe

Model: ZLT-P03 Conform to the IEC60335-2 -24 Figure102. Made entirely of hardened steel.

Lithium Battery Roll Press Machine for Bttery Electrode Pressing

4.0mm Test Pin

Model: ZLT-P04 Meets IEC, EN, UL and CSA Standards ，including IEC 61010,IEC60065 clause 9.1.3, EN61010-1, UL3101-1, and CSA 1010-1.