Cheap Laboratory Magnetic Stirrer Machine for Stirring

Laboratory  battery roll press machine for battery.

UL Children Safety Probe

Model ZLT-U15 Conform to UL1017-2010 figure 25 and 26, made entirely of stainless steel.

Compack Battery Vacuum Sealer Machine for Preparing Pouch Cell

Laboratory  battery roll press machine for battery.

Straight Unjointed Test Probes

Model ZLT-U01A , conforms to IEC 62368-1 Annex V and figure V.1,

5L Electric Vacuum Mixing Machine with Single Axis Helical Blade

Jointed Test Finger

Model: ZLT-I02D . Conform to Japanese Standards.

Laboratory R&D 500ml Planetary Vacuum Mixer Homogenizer Machine

Articulate Probe

Model: ZLT-C01 , Conform to the CSA C22.2. Handle is nylon, tip is stainless steel.

Test Arm

Model: ZLT-E01, Conform to the EN13683. Handle is nylon, tip is stainless steel.

Lithium Cobalt Oxide LiCoO2 Powder for Li-ion Battery Cathode Raw Materials

Single layer LiCoO2 coated on aluminum foil; lithium cobalt oxide LCO powder for battery cathode, also caled lithium cobaltate.

Glow Wire Tester

ZLT-GTR, to determine the fire resistance by the fire hazard test, accordance with IEC60695-2-10:2013, IEC60335, IEC60598 and other standards.

High quality Battery LiFePO4 LFP Cathode Powder for Lithium Battery Raw Materials

LiFePO4 (phosphate) cathode powder for Li-ion battery cathode manufacturing.

Glow Wire Tester ZLT-GTR

ZLT-GTR, accordance with IEC60695-2-10(2013), IEC60335, IEC60598 and other standards.

High Performance Lithium Manganese Oxide LiMn2O4 LMO Cathode Powder Materials

LMO lithium manganese oxide LiMn2O4 powder for Li-ion battery cathode.

Needle flame Tester

ZLT-ZY2, the instrument is designed to conform to the IEC60695-11-5, IEC60695-2-2

Battery Raw Material Lithium Nickel Cobalt Aluminum Oxide LiNiCoAlO2 NCA Powder

NCA is a further development of lithium nickel oxide; the addition of aluminum gives the battery better chemical stability.

Tracking Tester ZLT-LDQ1

ZLT-LDQ1, determination of comparative tracking index of solid electrical insulating materials,conform to IEC60112,IEC 60335-1, IEC60598-1, IEC60884-1

Battery Raw Materials LiNiCoMnO2 (Ni:Co:Mn=1:1:1) Powder for High Capacity Li-ion Battery Cathode

The secret of NMC lies in the combination of nickel and manganese.Nickel is known for its high specific energy, but its stability is poor; the manganese spinel structure can achieve low internal resistance but low specific energy. NMC111 powder for high capacity Li-ion battery cathode.

Horizontal Vertical Flame Tester ZLT-UL94

ZLT-UL94, the combustion test device of plastic materials represented by UL-94. It can perform each test of HB, V0 to V2, 5V and VTM, HBF

N-Methyl-2-pyrrolidone NMP Solvent

Horizontal Vertical Flame Tester ZLT-HV50

ZLT-HV50, conform to UL94, IEC60695-11-4, IEC60695-11-10 standard, Test Flame 50W (burning test for V-0,V-1,V-2 classification .

Good Chemical Stability Battery Polyvinylidene Fluoride PVDF Powder

Burning Characteristics Tester

ZLT-HV4, applicable to the single wire and cable, and soft line horizontal (FT1), vertical (VW1) combustion test,Conform to standard UL1581:1060/1061/1080/1090/1100

NMC 622 Powder Cathode for Lithium-ion Batteries (LiNiMnCoO2)

NMC 622 powder cathode for lithium-ion batteries (LiNiMnCoO2)

Single Vertical Insulated Wire Flame Chamber Tester

ZLT-BS1, conform to standard IEC60332-1-1,IEC60332-1-2,testing the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable, or optical fiber cable

Lithium Nickel Manganese Cobalt Oxide nmc 811 cathode material Powder

Hot Wire Coil Ignitability Test Apparatus

ZLT-HW1, to measure the time required to ignite the test specimen during the application of heat from an electrically heated coil as an ignition source, according to IEC60695-2-20. To measure the time required to ignite the test specimen during the application of heat from an electrically heated coil as an ignition source, according to IEC60695-2-20.

Lithium Nickel Manganese Cobalt Oxide NCM Powder 811 Cathode Material

Lithium nickel manganese cobalt oxide NCM Powder 811 cathode material

Super P Conductive Carbon Black Powder

Lithium nickel manganese cobalt oxide NCM Powder 811 cathode material

Horizontal Vertical Flame Test Chamber ZLT-HV500

ZLT-HV500, conform to UL94, IEC60695-11-3, IEC60695-11-20 standard, Test Flame 500W (burning test for 5VA, V5VB classification .

New Type Lithium Battery Raw Material Nickel Manganese LiNi0.5Mn1.5O4 Cathode LMNO Powder

 Manual Coin Cell Electrode Table Hydraulic Press Machine.

Clearance Gauge

ZLT-ZL4, Clearance Gauge , conform to IEC 60695-11-10 Figure 6

NCM532 LiNiMnCOo2 Cathode Materials NMC Powder

The secret of NMC lies in the combination of nickel and manganese.Nickel is known for its high specific energy, but its stability is poor; the manganese spinel structure can achieve low internal resistance but low specific energy. NMC111 powder for high capacity Li-ion battery cathode.

High Current ARC Ignition Tester

ZLT-DQY, according to UL746A,UL1082

LiFePO4 Electrode Materials for Lithium ion Battery Cathode

Internal Wire Flexibility Tester

ZLT-WM1A, in accordance with IEC60335-1 clause 23.3, For continuous bending tests by swivelling movements to check internal wire in normal use or maintenance

Lithium Cobalt Powder Coated Conductive Electrode Materials LiCoO2 Electrode

Flexible Cables Flexing Tester ZLT-QL1

ZLT-QL1. This Tester is checking mechanical strength of completed flexible cables,according to IEC60245-2/1998-04 figure 1, IEC60227-2/1997-11 figure 1, IEC60065 /1998-07 Table 11.

Swivel Test Machine

ZLT-JDW1. For continuous bending tests by swiveling movements to check supply cord where it enters the appliance, in accordance with IEC60335-2-23 clause 11.101.

High Density NMC Electrode Materials Lithium Nickel Manganese Cobalt Oxide Electrode Sheet