Email Us : info@sfyh.com

Company profile

Gester offers professional lab test instruments, including Footwear Testing Equipment, Textile Testing Equipment, Toys Testing Equipment, Furniture Testing Equipment.

All products

Shoe Peeling Strength Tester GT-KC41A

Shoe Peeling Strength Tester is determined for testing the peeling strength between sole and upper of a whole shoe or between outsole and medium bottom.

Maeser Water Penetration Tester GT-KC05

Maeser Water Penetration Tester: To determine the resistance of leather, artical leather, fabric and so on material to water penetration on flexing.

BALLY Water Penetration Tester GT-KC06

BALLY Water Penetration Tester is used for determining the resistance of leather, artificial leather, fabric and so on footwear upper material to water penetration on flexing, in order to assess the suitability for the end use.

Footwear Water Penetration & Flexing Tester GT-KA02

Footwear Water Penetration Flexing Tester can be used to test the dynamic waterproof performance of different kinds of finished shoes.

Dynamic Footwear Water Resistance Tester GT-KA02-2

Dynamic Footwear Water Resistance Tester is designed to determine the dynamic water resistance of all types of shoes.

Shoe Water Resistance Tester GT-KA03

Shoe Water Resistance Tester is used to determine waterproof performance of whole shoes. The shoes will be subject to mechanical scrubbing of rotating wet brush under a certain deep of water, which to measure water penetration of shoes.

Shoe Lining Leakproofness Tester GT-KA15

Shoe Lining Leakproofness Tester is used to fast determine the waterproof resistance of rubber shoes and shoe inner liner.

Water Vapor Permeability Tester GT-KC21

Water Vapor Permeability Tester, Waterproof Tester, Waterproof testing machine for vamp and upper shoe materials ( including surface and lining )

Water Vapor Absorption Tester GT-KC51

Water Vapor Absorption Tester is used to determine the coefficient of water vapor absorption on leather and non-leather upper. Standards: ISO 17229, EN ISO 20344, AS/NZS 2210.2, GB/T 20991, EN 344-1

Compression Rebound Tester GT-KB21

Compression Rebound Tester is to determine the compression rebound property of a material. The method is mainly applicable to solid and cellular footwear slings materials.

Compression And Puncture Tester GT-KB12A

Compression And Puncture Tester is Used to measures the compression strength for safety shoes toecap and puncture-resistant performance for sole steel plate.

Compression And Puncture Tester GT-KB12B

Compression And Puncture Tester measures the compression strength for safety shoes toecap and puncture-resistant performance for sole steel plate.

Rubber Compression Set Tester GT-KB22

Compression Set Testing used especially to test the static compression for rubber.

Cellular Plastic Reciprocating Compression Tester GT-KC50

Compression Tester,Reciprocating Compression Tester,Reciprocating Compression Tester for cellular plastic

Environmental Chamber Temperature and Humidity Test Chamber GT-C52

Temperature and Humidity Test Chamber is for conditioning of samples prior to testing. It also can be used for a variety of materials of high - low temperature humidity test alternating test.

Environmental Corrosion Chamber Salt Spray Tester GT-F50A

Salt Spray Tester is also called Salt spray test chamber. The salt spray test of Salt Spray Tester aims at determining the product corrosion resistance after various kinds of materials surface suffering electroplating, anodizing, painting, rust-proof oil corrosion resistance treatment.

PLC Touch Screen Salt Spray Corrosion Test Chamber GT-F50B

Salt Spray Tester is also called Salt spray corrosion test chamber. The salt spray corrosion test of Salt Spray Tester aims at determining the product corrosion resistance after various kinds of materials surface suffering electroplating, anodizing, painting, rust-proof oil corrosion resistance treatment.

Thermal Shock Chamber GT-F56

Thermal Shock Chamber is prohibited to flammable, explosive, easy to volatile substances sample test or storage, corrosive substance sample test or storage, biological sample test or storage, strong electromagnetic emission source sample test or storage.

Temperature and Humidity Climatic Test Chamber GT-C52

Temperature and Humidity Climatic Test Chamber is for conditioning of samples prior to testing. It also can be used for a variety of materials of high - low temperature humidity test alternating test.

Chair Seating and Back Testing Machine GT-LB04-1

The test machine is to simulate the daily use of the process of loading the seat on the seat and back to test the durability.

Chair Seating Impact and Durability Testing Machine GT-LB05

Chair Seating Impact and Durability Testing Machine applies to all types of chairs, with 2 functions of chair seating impact and seating durability test.

Chair Caster Durability Testing Machine GT-LB06

This European Standard specifies test methods and requirements for the determination of the stability of all types of domestic seating for adults.

Chair Swivel Testing Machine GT-LB07

Chair Swivel Testing Machine applies to all chair types with a swivel seat.

Chair Assembly Testing Machine GT-LB08-1

Chair Assembly Testing Machine combination with Drop Test, Backrest Durability Test, armrests Durability and Leg Strength Test.

Chair Assembly Testing Machine GT-LB08-2

Chair Assembly Testing Machine used for the strength and durability of seats and stools.

Computer Five Feet Compression Resistance Tester GT-LB14

Computer Five Feet Compression Resistance Testermachine is used to test the compressive strength of the five feet of the office seat, and test the stressful situations of the feet by the vertical pressure.Secure the chair casters to the turntable, set an certain time and an certain times of forces on the feet, check the feet anti-damage ability.

Chair Seat Impact Testing Machine GT-LB05A

The test machine is to simulate the daily use of the process of loading the seat on the seat and back to test the durability.

Caster and Base Durability Testing Machine GT-LB09

This Caster and Base Durability Testing machine applies to pedestal base chairs with casters or chairs with legs and casters, to evaluate the ability of the casters , chair frame or chair base to withstand fatigue stresses and wear caused by moving the chair back and forth.

Chair Armrest Durability Testing Machine GT-LB03L

Chair Armrest and Seat Front Edge Testing Machine GT-LB03L tests the strength and durability of the handrails, seats, or other parts by simulating the loading of the seats during routine use.

BIFMA Bag Type Impactor Device GT-LB01-11

BIFMA Bag Type Impactor device is designed specifically for BIFMA X5.1. Mainly for the office chair Dynamic Drop Test and Seating Impact Durability Test to provide impact load, configured to use in GT-LB05.

BIFMA Incremental Weights GT-LB01-10

BIFMA Incremental Weights is designed specifically for BIFMA X5.1. Mainly used to assist the office chair backrest dynamic test when the load on the seat surface.

BIFMA102&50mm Loading Pad GT-LB01-9

This load pad is designed specifically for BIFMA X5.1, which is a rigid rectangle object 102×50 mm in dimension ,with a 12 mm front edge radius. Mainly used to test the office chair pedal static load and durability.

203mm Loading Pad GT-LB01-8

This load pad is designed specifically for BIFMA X5.1, which is a rigid circular object 203±13 mm in diameter,with a 12 mm front edge radius.

Impact Hammer GT-LB01-7

Impact hammer, with a cylindrical pendulum head having a mass of 6,5 kg, supported from a pivot by a steel tube of 38 mm in diameter and with a wall thickness of 2 mm.

Seat Impactor Device GT-LB01-6

The seat impactor is comprised of the following elements, circular body, springs and striking surface. Is the necessary accessories for seat impact test.

Chair Armrest and Seat Front Edge Testing Machine GT-LB03S

Chair Armrest and Seat Front Edge Testing Machine GT-LB03S tests the strength and durability of the handrails, seats, or other parts by simulating the loading of the seats during routine use.

Back Loading Pad GT-LB01-4

Back loading pad, which is a rigid rectangular object 200 mm high and 250 mm wide, the loading surface of which is curved across the width of the pad with a convex cylindrical curvature of 450 mm radius and with a 12 mm radius on all front edges.

Smaller Seat Loading pad GT-LB01-3

Smaller seat loading pad, which is a rigid circular object 200 mm in diameter, the loading surface of which has a convex spherical curvature of 300 mm radius with a 12 mm front edge radius.

Seat Loading Pad GT-LB01-2B

Seat loading pad, which is a naturalistically shaped rigid indenter with a hard, smooth surface .

Seat Loading Pad GT-LB01-2A

Seat loading pad, which is a naturalistically shaped rigid indenter with a hard, smooth surface .

Showing 10 to 12 of 12 (10 Pages)

click here to leave a message
leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.