Shoes Bending Stiffness Tester GT-KA16

Shoes Bending Stiffness Tester is used to measure bending resistance of whole shoes (France shoe Size 39, 42,and British shoe Size 6,Size 8). Clamp the foreshoes (confirming to 1/3 of palm shoes, located on shaft location), after motor launching, driving to pulley, to make shaft drive the turning board at 100mm/min to impose the strength of 30N to shoes in order to do test.

Leather Digital Lastometer GT-KC37A

Lastometer, Digital Lastometer, Leather Digital Lastometer: To determine the anti-cracking index for upper, leather facing and all kinds of thin leather.

Safety Shoes Cold Insulation Test Chamber GT-KB25

Safety Shoes Cold Insulation Test Chamber is used to determine the Cold insulation test for safety shoes under low-temperature.

Leather Crack Test Lastometer GT-KC37B

Leather lastometer, Leather lastometer of handle model, Grain testing equpment: To determine the anti-cracking index for upper, leather facing and all kinds of thin leather.

Anti-static Electrical Resistance Tester GT-KC38-1

Electrical resistance tester, Anti-static electrical resistance test,Electrical resistance tester for footwear: This instrument is used for testing the electrical resistance of the shoe or its materials so as to assess its anti-static characteristics.

Human Body General Resistance Tester GT-KC38-2

Pneumatic Sample Press GT-C48-2

Sample pneumatic compression machine, a new type of desktop compression machine, equipped with 125 mm gas cylinder.

Thermostatic Oil Bath Tester GT-KC39

Thermostatic Oil Bath, Thermostatic Oil Bath Tester, Oli resistance tester: To determine the oil resistance for all kinds of materials and the length change rate under the oil temperature for PE, PVC etc.

Sole Leather Grain Crack Index Tester GT-KC40

Leather grain tester, Grain Crack Index Tester, Sole Leather Grain Crack Index Tester: To determine the propensity of the grain of a leather to crack during bending. The method is applicable to all sole leathers.

Cellular Rubber Hardness Tester GT-KC49

Cellular rubber hardness tester,Hardness tester for rubber,Foam Testing Equipment, Footwear Testing Machine

Melt Flow Tester GT-KC67

Melt Flow Tester, Melt Flow Tester for plastic material, Foowear testing machine

Density Balance & Densimeter GT-KD04

Densimeter, Density balance,Densimeter for rubber, Footwear materials desimeter Standards: ISO 2781, 1183, DIN 53479, ASTM D 297, D792, GB/T 533, T1033

Proportion Detector GT-KD05

Proportion Detector, Specific gravity test, Sole specific gravity test

Penetration-Resistant Inserts Flexing Tester GT-KB11

Penetration-Resistant Inserts Flexing Tester is used for determine the flex resistance of penetration-resistant inserts for safety shoes.

Thickness Gauge ( Leather ) GT-KD07

Thickness gague,Leather thickness tester,Thickness gague for leather materials Standards:BS-903-A38, ISO-4648, ASTMD1813, ISO 2589,SATRA TM48

Durometer Test Stand GT-KD09

Thickness gague,Leather thickness tester,Thickness gague for leather materials Standards:BS-903-A38, ISO-4648, ASTMD1813, ISO 2589,SATRA TM48

Shore A Durometer GT-KD09-LX-A

Durometer,Rubber hardness test,Shore A Durometer Tester Standards:GB/T531.1 , ISO7619-1, ASTMD2240- Type A

Shore AM Durometer GT-KD09-LX-AM

Shore AM Durometer,Rubber hardness tester,Rubber Durometer Standards:GB/T531.1 ,ISO7619-1, ASTMD 2240-Type M

Shore AO Durometer GT-KD09-LX-AO

Shore AO Durometer, Hardness Tester, Rubber Hardness Meter Standards:GB/T531.1 , ISO7619-1

Shore C Durometer GT-KD09-LX-C

Shore C Durometer, Hardness gague, Durometer for rubber Standards:HG/T2489

Shore D Durometer GT-KD09-LX-D

Shore D Durometer, Hardness meter for rubber, Hardness testing equipment Standards: GB/T531.1 , ISO7619-1, ASTMD 2240-Type D

Shore OO Durometer GT-KD09-LX-OO

Shore OO Durometer, Shore OO Hardness Tester for rubber, Shore OO Hardness Gauge Standards: ASTMD 2240-Type OO

Drill Machine GT-KD-DM68

Drill, Drill machine, Bench drill

Rubber Sole Non Marking Testing Machine GT-KA17

Non Marking Testing Machine is use to do non marking test for all the finished shoes products which require to do this test, so as to evaluate non marking performance for rubber sole of shoes.

Automatic Digital Rockwell Hardness Tester GT-HRS-150

Rockwell hardness is suitable for the hardness test for ferrous metals, nonferrous metals and non-metallic materials .

Pneumatic Sample Cutting Machine GT-KD20

This is console model pneumatic sample cutting machine, which is suitable for cutting paper, cardboard,textile, leather, rubber and other materials.

Universal Testing Machine for Footwear (Dual Column) GT-K01

Universal Testing Machine (Dual Column) For Shoes is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes ,rubber, plastic, leather, metal, nylon line, fabric, paper

Shoes Rubber Materials Universal Testing Machine GT-K01

Universal Testing Machine (Dual Column) For Shoes is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes, rubber, plastic, leather, metal, nylon line, fabric, paper

Single Column ASTM Tensile Test Machine GT-UA03

This Tensile Test Machine is applied to the test of mechanical property like tension, compression, bending, shear , tear, peel of materials such as rubber, plastic, aluminum tube, composite materials, waterproof materials, prevention material, yarn, fiber, wire and cable, paper, spring, wood, packaging materials, adhesive tape, etc.

IULTCS & Veslic Leather Abrasion Tester GT-KC01-1

This IULTCS & Veslic Leather Abrasion Tester is used for color fastness testing of leather, plastic and textile. Under the specified pressure, let white wool felt to do reciprocating abrasion to the surface of dye sample.

IULTCS & Veslic Leather Abrasion Tester GT-KC01-2

This IULTCS & Veslic Leather Abrasion Tester is used for color fastness testing of leather, plastic and textile. Under the specified pressure, let white wool felt to do reciprocating abrasion to the surface of dye sample.

DIN Abrader Rubber DIN Abrasion Tester GT-KB03

DIN Abrader - DIN Abrasion Tester is used to determine wear performance test of materials like elastic material, rubber, tires, conveyor belts, conveyor belts, shoe soles.

NBS Rubber Abrasion Tester GT-KB02

Rubber Abrasion Tester is to determine the resistance to abrasion of vulcanized rubber or other compounds, or both, used for the soles and heels of footwear.

Shoelace Against Eyelets Abrasion Tester GT-KC03

This Shoelace Abrasion Tester is used for shoelace against standard eyelet abrasion testing, or eyelet against standard shoelace abrasion testing. This tester is suitable for all kinds of shoelace and eyelet.

Rubber Akron Abrasion Tester GT-KB04

Akron Abrasion Tester is to determine wear resistance of vulcanized rubber and elastic material products.

Martindale Abrasion Tester GT-KC13A

Martindale Abrasion Tester used to determine the abrasion resistance of all kinds of footwear vamp material. Samples are rubbed against known abrasion at low pressures and in continuously changing directions and the amount of abrasion.

Taber Abrasion Resistance Test Machine GT-C14A

Taber Abrasion Test Machine is determine the wear resistance of materials and assess its wear resistance degree

Taber Abrasion Tester GT-C14B

Taber Abrasion Tester is used to determine the wear resistance of materials and assess its wear resistance degree

Whole Shoe Abrasion Tester GT-KA13

This Whole Shoe Abrasion Tester is used to measure the abrasion resistance of finished shoe sole or molded sole(piece).

Shoelace Rubbing Tester GT-KC02

Shoelace Rubbing Tester, Rubbing tester for shoelaces, Wear resistance test for shoelace This Rubbing Tester is used to test the abrasion resistance for shoelace of cotton, hemp, chemical fiber or other materials.