Gester Instruments Co.,Ltd.-sfyh.com

Nonwovens Absorption Tester GT-CN02

This Nonwovens Absorption Tester GT-CN02 is used to test absorption of nonwoven, such as liquid absorbency time, liquid absorptive capacity, liquid wicking rate, liquid wicking height.

Nonwovens Run-off Tester GT-CN03

This Nonwovens Run-off Tester GT-CN03 is used to test the overflow quantity of thin nonwoven, such as sanitary towel and diaper coating material.

Liquid Strike-Through Tester GT-CN04

Liquid Strike-through tester can be used to determine the liquid strike-through test of nonwovens such as sanitary napkins, diaper covering materials and so on.

GB/T 8942 Softness Tester GT-CN05

Softness tester can be used to determine the softness of high-grade toilet paper, tobacco flakes, fiber paper products and other materials.

Constant Temperature Viscosity Tester GT-CN06

Constant Temperature Viscosity Tester can applicable to all kinds of sticky products such as pressure-sensitive adhesive tapes, medical patches, adhesive labels, protective films, etc.

Liquid Permeability Tester GT-CN07

Liquid Permeability tester can be used to determine the rewet volume of sanitary materials.

TPP Thermal Protection Tester GT-CN08

The TPP thermal protection instrument is mainly used to measure the thermal insulation performance of flame-retardant protective clothing fabrics exposed to radiant heat sources and convection heat sources to detect the thermal protection performance of protective clothing, safety shoes, gloves, and helmet outer surfaces.

Respirator Breathing Resistance Tester GT-CN09

Cover Breathing Resistance Tester can be used to determine the inspiratory and expiratory resistance of masks under specified conditions.

Diaper Permeability Tester GT-CN10

Automatic limiting oxygen index tester can be used to determine the amount of effusion, leakage and leakage of diapers and diapers or pads for infants and adults.

Coefficient of Friction COF Tester GT-CN11

Friction Coefficient Tester can be used to determine the static friction coefficient and dynamic friction coefficient of plastic film and sheet (or other similar materials).

Dynamic Strength Tester & 2 m/s Tester GT-M19

This Dynamic Strength Tester is mainly used to test the dynamic strength of wheeled ride-on toys.

EN Compression Test Disc GT-M38A

EN Compression Test Disc GT-M38A is used to provide a pressure test for toy plane.

ASTM Compression Test Disc GT-M38B

ASTM Compression Test Disc is used to provide a pressure test for toy plane.

Flat Clamp GT-M39

Toys Flat Clamp is the assistant tool used for toys tension test.

Large Torque Fixture GT-M40

Large Torque Fixture is the assistant tool for toys torque test.

Small Ball Test Template GT-M47

Small Ball Test Fixture is use to examine a toy up of whether small ball accessories may result in the child swallow, stop breath way and esophagus to cause choking danger or not.

Toys Chest Lid Tester GT-M02

The Toys Chest Lid Tester applies to test the durability of toys box cover. It uses fixtures to drive the toy box cover move, after simulating a certain number of opening and closing movements, check whether the toy box lid hinge part’s functions are in good condition.

Mouth-actuated Tester GT-M03

Mouth-actuated Tester is suitable for Toy Durability test Toy safe Durability test, such as whistles with a ball, the sounders with a reed and other toys.

Transportation Vibration Tester GT-M11

Transportation Vibration Tester is suitable for Simulation of transport shaking test ,ASTM D999 vibration meter, ISTA vibration meter .

Rattle Test Template GT-M46

Rattle Test Template is used to test whether toys or the parts of toys may cause choking or swallowing. There are two kind of test template: oval rattle test fixture and round rattle test Template.

Small Torque Fixture GT-M42

Torque Test for Toys Torque Clamp Middle is the assistant tool for toys torque test.

Sharp Edge Tester GT-MB01

Sharp Edge Tester is suitable for sharp edge testing as per 16CFR, ISO 8124-1, GB6675-2 and ASTM F963 standards.

Standard Test Finger Probe & Accessibility Probe GT-MB06

Standard Test Finger Probe & Accessibility Probe GT-MB06 is used to determine whether the hazardous parts of toys can be touched.

Seam Clamp for Toys Tension Test GT-M50

Seam Clamp is the assistant tool used for toys tension test and is a Seam Clamp Metal Clamps, 16CFR 1500 Metal Clamps, ISO 8124-1 GB6675-2 Metal Clamps .

Hook Test Fixture for Cords and Loops GT-MB24

Hook Test is an auxiliary tool to measure perimeter for Loops and Cords, so as to determine whether length of ropes complies with safety requirements.

Sharp Point Tester GT-MB04

Sharp Point Tester is used to determinate that points on toys and other articles intended for use by children under 8 years of age. It is suitable for toy safe as per standards: ISO 8124-1 EN-71-1 16 CFR 1500 ASTM F 963 GB6675-2.

Toy Kinetic Energy tester GT-M18B

Kinetic Energy tester is used to detect the maximum kinetic energy generated by the fired bullets of Projectile toys or the launched bows. It meets standards: ISO 8124-1, GB6675-2, EN-71-1, ASTM F963.

Small Part Cylinder GT-MB03

Small Objects Choke Tester mainly used to determine the potential hazards of suffocate, suction, swallow, etc, which results from the toys or other articles with small parts used for the children below 3 years old. It meets standards: EN-71-1, ASTM F963,16CFR 1501,ISO 8124-1, GB6675-2.

Wide-Mouth Clamp GT-M53

Mouth clamp is the assistant tool used for toys tension test.It is a wide mouth clamp ,meets standards: EN-71-1, ASTM F963, 16CFR 1500, ISO 8124-1, GB6675-2.

Clamp for Wheel Tension GT-M54

Wheel tension clamp is the assistant tool used for toys tension test. Mainly used for toy car wheels tension test. It meets standards: EN-71-1, ASTM F963, 16CFR 1500, ISO 8124-1, GB6675-2.

Noise Meter GT-AWA6228Plus

Noise meter is used to measure the sound pressure level comes form sound toys in a predetermined distance. It meets standards: EN-71-1, ISO 8124-1, GB6675-2, ASTM F963, 16CFR 1500.

Ball Impact Tester GT-M28

Ball Impact Tester is used to test the impact resistance of all rigid toys that cover the face, meets standards: ASTM F 963, ISO 8124-1, GB6675-2.

Three Pronged Clamp GT-M37

Three Pronged Clamp is the assistant tool used for toys tension test. It meets standards: EN-71-1, ASTM F963, 16CFR 1500, ISO 8124-1, GB6675-2.

Two Pronged Clamp GT-M36

Pronged Clamp is the assistant tool used for toys tension test. It meets standards: EN-71-1, ASTM F963, 16CFR 1500, ISO 8124-1, GB6675-2.

Long - Mouth Clamp GT-M43

Long Mouth Clamp is the assistant tool used for toys tension test and it can do the tests according to standards: EN-71-1, ASTM F963, 16CFR 1500, ISO 8124, GB6675-2.

ASTM Flexure Tester GT-M44A

Flexure Tester is used to do bending test, meets standards: ASTM F963, 16 CFR 1500, GB6675-2.

EN Flexure Tester GT-M44B

EN Flexure Tester is used to do the bending tests which meets standards: EN71-1 section 8.13, ISO 8124-1 section 5.24.8, GB6675-2 section 5.24.8.

Noise Testing Stand GT-M60

EN 71 part 1 Noise Testing Stand is the test stand for noise meter, meets standards: EN-71-1, ISO 8124-1, GB6675-2, ASTM F 963, 16CFR 1500.

Pen-Cap Air Flow Tester GT-S06

Pen cap air flow tester mainly be used to test the safety of the caps for writing and marking instruments which are designed or clearly intended for use by children up to 14 years of age. However, Caps for writing and marking instruments which are not designed or intended for use by children, e.g. jewellery pens, expensive fountain pens, professional technical pens, are not be test by this method .

Bite Tester GT-M45

Bite Tester is used to test whether the toys has cracked after bite test, and if it has produced hazardous sharp points, hazardous sharp edges, and hazardous small parts after crack.

Company profile

All products