Gester Instruments Co.,Ltd.-sfyh.com

Downproof Tester GT-C41

This downproof tester is apply to test down and/or feather penetration through the primary tick fabric of a specimen containing feather and/or down filling.

Automatic Feather and Down Filling Power Tester GT-C43B

Feather and Down Filling Power Tester is applied to determine the filling power of feather and down, and product filling materials

Full-Automatic Fabric Stiffness Tester GT-C70A

Fabric Stiffness Tester is to measure the fabric stiffness, in addition to determine the bending height, flexural rigidity and bending modulus of fabrics by simple procedures and calculations.

Formaldehyde Content Tester GT-C76

Formaldehyde Content Tester used for rapid testing formaldehyde contents in all kinds of textiles.

Digital Pneumatic Stiffness Tester GT-C70B

Digital Pneumatic Stiffness Tester is used to determine fabric stiffness using the ASTM circular bend test method.

Wyzenbeek or Oscillatory Abrasion Tester GT-C71

Wyzenbeek or Oscillatory Abrasion Tester used for abrasion resistance of textile, leather and imitation leather, and can be reference as improving products quality.

Fryma Fabric Extensiometer GT-C82

determine the stretch and recovery of textile fabrics, both knitted and woven

Yarn Crimp Tester GT-C180

Yarn Crimp Tester; Determining the yarn length absorbed knits; crimp of yarns; Absorption Control of yarn evenness.

De Mattia Flexing Tester GT-C40

De Mattia Flexing Tester is suitable to determine resistance to damage by flexing for rubber or plastics coated fabrics.

Crumple Flex Tester GT-C44

Crumple Flex Tester is suitable to determine resistance to damage by crumpling and flexing method for rubber or plastics coated fabrics.

Pneumatic Bursting Strength Tester GT-C12B

Bursting Strength Tester is used for determining the bursting strength of woven or knitted fabrics, non-woven, paper, leather and board by application of a pneumatic load under a rubber diaphragm of a specific area.

Random Tumble Pilling Tester GT-C19B

Random Tumble Pilling Tester is used to determine the pilling and fuzzing characteristics of textile fabrics.

Wrinkle Recovery Tester GT-C21-2

This Wrinkle Recovery Tester is used to determine the appearance of textile fabrics after induced wrinkling.

Fabric Water-vapour Transmission Tester GT-C28

Fabric Water-vapour Transmission Tester: To test the water vapour transmision of various fabric (moisture permeable fabric included) and non-woven fabric such as bat wool, space cotton, sportswear fabric etc.

Downproof Tester (Impact Test Method) GT-C42

This Downproof Tester is used for down and/ or feather penetration through the primary tick fabric of a specimen containing feather and/or down filling.

Non-woven Thickness Gauge GT-C46-3

This thickness gauge used for measure kinds of non-woven which thickness less than 20mm.

Gas Fume Chamber GT-C49

Gas Fume Chamber is used to determine the colorfastness of of textiles of all kinds and in all forms when exposed to atmospheric oxides of nitrogen as derived from the combustion of natural gas.

Bean Bag Snag Tester GT-C50

This Bean Bag Snag Tester is to test the snagging resistance of knitted fabric.

Circular Sample Cutter GT-C75-3

Circular Fabric Sample Cutter 38mm and 140mm diameter fabric.

Automatic Textile Formaldehyde Tester GT-C76-2

This Formaldehyde Tester apply for quickly testing formaldehyde content of all kinds of textile.

Pilling Assessment Box GT-C78

Pilling Assessment Box; Suitable for all standards where the assessment of pilling on fabrics is necessary, whether against control fabrics or photographs.

Fabric Density Glass GT-C83

Fabric Density Glass is used for testing the number of yarn in warp-wise or across warp of all kinds of fabrics in set length.

Fabric Stretch and Recovery Tester GT-C181

Fabric Stretch and Recovery Tester is used for evaluation of the amount of fabric stretch, fabric growth, and fabric recovery of fabrics woven.

Dry Cleaning Cylinder GT-C36

Dry Cleaning Cylinder is used to determine color fastness to drycleaning and chlorinated pool water.

Button Snap Pull Strength Tester GT-C09

Button Snap Pull Strength Tester is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can fixed on garments suitable.

Automatic Air Permeability Tester of Textile Fabrics GT-C27

Automatic Air Permeability Tester is used to test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc

Falling-Pendulum Type Tearing Tester GT-C10B

This Elmendorf Tearing Tester GT-C10B can be used to test the Determination of tear resistance of textile, non-woven fabrics, paper, paperboard, thin film, ventilation tape, sheet metal etc.

ASTM D4151 Blanket Burning Tester GT-C200

Blanket Burning Tester is suitable for Flame retardancy of bed linings including bed sheets, blankets, mats on mattresses, pillows, duvets and similar products used to cover the bed.

Brush Pilling Tester GT-C20

ASTM D 3511 Brush Pilling Tester GT-C20 is used to determine the fabric pilling performance in simulate wearing and normal operating conditions

ISO 5981 Flex Abrasion Tester GT-C23

This ISO 5981 Flex Abrasion Tester is evaluated the resistance to combined shear flexing and rubbing of rubber or plastics-coated fabrics.

GSM Cutter for Fabric GT-C75

Circular Sample Cutter 100cm2 combine with the electronic balance. Suitable for 100 cm2*5mm depth of cut, provided with the cutting mat and the spare blades.

ICI Pilling Box Tester GT-C18

ICI Pilling Box Tester is to determine the surface pilling and snagging properties of both woven and knitted materials.

Down Feather Inspection Projector GT-C43C

This down feather detection projector mainly used for inspecting the down feather of Duck or Goose.

Low Temperature Schildknecht Flex Fatigue Tester GT-C47B

This machine applies to test the resistance to repeated flexing of the coated fabrics under low temperature. And provide a reference to improve the fabrics.

GT-C75-3 GSM Round Cutter 38mm

GSM CUTTER is an economical equipment to cutting the 38mm diameter sample of the fabric (Woven, Non Woven or Knitted). GSM ROUND CUTTER can be used to cut virtually any type of material including film, foam, carpet, paper and board.

Martindale GT-C13 For Testing The Abrasion and Pilling

The Martindale Abrasion and Pilling Tester is the standard method of determining the wear resistance of textiles or leather and the resistance to pilling.

Color Assessment Cabinet for Fabric (textile light box) GT-D08

Color Matching Cabinet for Fabric GT-D08 Colors appear differently under different lighting sources.

Crockmeter Rubbing Fastness Tester GT-D05

Crockmeter/ Rubber Fastness Tester GT-D05 To determine the colour fastness of textiles to dry or wet rubbing. A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results.

Suntest & Xenon Arc Tester GT-D01

The Suntest & Xenon Arc Testers is a powerful Xenon Instrument for conducting accelerated tests of light fastness and photo stability tests.

(Gakushin) Color Fastness to Rubbing Tester GT-D06

Color Fastness to Rubbing Tester used for evaluating a material's resistance to rubbing motion.

Company profile

All products