multi jet water meter-sfyh.com

1/2 "-2" cast iron body dry dial multi-jet water flow meter

multiple jet water meter, the operating principle is based on a system that forces the passage of the incoming water through a precise series of open pipes in a capsule. This represents the distributor, which contains the turbine inside. The water inlet produces a series of symmetrical jets, which constantly impact the turbine, which thus remains in equilibrium.

1/2”multi jet cold water meter

Muti jet water meters that provide accurate and reliable water consumption measurement. fast and easy to install water meters are the right and safe way of designing and installing, as well as being used as a tenant or property owner.

DN40 Grey Iron Housing, pulse emitter by reed switch PN16, thread connect Multi Jet Water Meter

These water meter are for record the total water volumetric flow meter in cubic, liter which pass through the closed pipe line, like water utilities, municipal water supply, etc.

DN15, 1/2 Inch Multi Jet Water Meter For Water Utility Lora newworking remote water meter

Portable multi jet water meter equiped with Lora networking by M-bus or RS485 wire or via wirless module,which make it so easy to remote reading or control remotely .DN15-50 sizes range ,best for residential ,domestic apartments

Multi jet domestic water meter

The multi jet water meter, is made of brass, plastic or iron body. Available in sizes 15mm to 50 mm for residential application

Multi jet water meter

Portable multi jet water meter equiped with Lora networking by M-bus or RS485 wire or via wirless module,which make it so easy to remote reading or control remotely .DN15-50 sizes range ,best for residential ,domestic apartments

R80 100 Electromechanical Synchronous Photoelectric Direct Reading Water Meter

The electro-mechanical separation wire direct reading meter does not change the water meter structure and does not affect the precision and sensitivity of the traditional wet water meter.

Residential multi jet water meter

The multi jet water meter Measures the volume of cold potable water passing through the pipeline

Super dry dial multi jet water meter

Multi-Jet Water Meters (Model LXSG 1E-50E, ½ "- 2") with screw thread, water runs through multi-jet paddle. The paddle wheel is so symmetrically loaded, so there is less wear.

Horizontal brass multi jet water meter

this type of water meter are of horizontal to pipeline ,brass body ,and multi jet water meter principle , consists of multi jet water meter, and wired Mbus communication. Available in sizes 15mm to 50 mm for residential application

Impeller Type DN25 Multi Jet Water Meters With Pulse Output

a multi jet or single jet type water meter which measuring total volume of water passing through the pipe and mainly for household ,residential ,domestic small water flow.its a kind of vane wheel water meter.it mainly charictarized as easy handle,accurate in use of cold water or hot water,the impeller is placed in center of meter chamber and circled by jet inlets.inlet and outlets seated oppisitely .the register totalizer dial is driven by a gear .

Impulsed bronze multi jet water meter

LXSG-15R~25R model meter for cold drinking water of 15, 20 and 25 mm. (1/2 ", ¾" and 1 ") in diameter, Brand EMI, metrology class B, velocity and multi-jet type, horizontal installation, with transmission

multi jet vane wheel plastic water meter

The water meter is mainly used for measuring the total volume of water flowing through the tap and water pipe, and is suitable for water for small industrial enterprises and domestic water. This water meter is not suitable for hot water and corrosive liquids.

Vertical rotary vane wheel multi jet cold water meter

this type multi jet water meter used for residential ,domestic water ,should install it the same direction of water pipe and tap

Multi jet rotary vane wheel dry iron type water meter

The LXSG is a multi-jet meter used to measure the flow of cold water and is capable of measuring any water quality, including extremely rigid, scaling or suspended particles, because the wheel is sealed in a special liquid and is equipped with pressure compensation devices. This sealed wheel will not touch the water flowing through the meter, making the reading always clear and easy to read.

multi jet residential copper water meter

multi-jet water sub-meter is designed to measure cold potable water where flow is in one direction for residential applications. Available in sizes 1/2" through 2" and with optional pulse or encoded output.

Multi jet brass water meter

water meters EMI® for its sensitivity and accuracy significantly contribute to a more equitable allocation of water consumption, greatly reducing the differences in the measurements between the base of the building and the sum of residential water meters. At present it is one of the most accurate residential water meters in its class