Factory Supply antenna ,All Kinds Of Electronic Products

PL259 UHF Male Straight Connector Solder Attachment 4 Hole Flange Mount with Spill Insulator Solder Cup

UHF Connector Features： Can terminate to coax or terminal; Can be male, female or sexless gender with 50ohm impedance; Body can be straight or right angle; Mount Method can be 4 hole flange, bulkhead, 4 hole panel or mountless options; Attachment methods include clamp/solder, crimp/solder, field replaceable or solder; Body is brass or zinc.

New N Female to SMA Male Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

Straight RF Coaxial 4.3-10 Female Connector with RG402 Cable Assembly

4.3-10 Cable assembly Features： Can be combined with 2.2-5, 4.3-10, 7-16 DIN, N, NEX10, QMA, or SMA connector; Body Can be right angle or straight connectors; Body Can be 4 hole panel, bulkhead or standard mount connectors; Cable Can use flexible or corrugated cable.

GSM GPRS Antenna 2.5dBi 890-960MHz 1710-1880MHz Rubber Antenna SMA Male Right Angle Connector Aerial for Ham Radio

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

3 way Base Station Round Cavity Power Splitter Divider 698-4000MHz PIM3 160dBc DIN 7-16 Female Connectors

Features： Wide Frequency Band for 4G and 5G, 698-2700MHz, 617-3800MHz, 698-3800MHz; Low Insertion Loss & Low VSWR; Low PIM, supports -140/-150/-155/-160dBc; N, 7/16 DIN, 4.3-10 Female connectors are available; Use for equal splitting of high power RF signals with minimal reflections or loss; Multi-type power splitters are available in 2-way, 3-way and 4-way; High Reliability, IP65 & IP67 waterproof.

1.0-2.3 Jack Female Right Angle Bulkhead Mount Push-On Connector Solder Attachment Thru Hole for PCB

1.0-2.3 Connector Features： Can terminate to coax or PCB (printed circuit board); Can be jack or plug gender in standard polarity with 50 or 75 ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead or mount-less; Attachment methods include crimp/solder, solder or solder/solder; Body is brass or stainless steel.

New Design N Female to SMA Male Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

RF Coaxial 7-16 DIN Female 4 Hole Flange Connector with .086" Cable Assembly

7-16 DIN Cable assembly Features： Can be combined with 4.3-10, 7-16 DIN, BNC, N, NEX10, QMA or SMA connector; Body Can be 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

Straight Head WiFi Small Pepper Antenna GSM Blue-tooth Antenna 2.5dBi GPRS 3G GSM Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

4 way Power Divider Wide band Round Shape 698-4000MHz 7-16 DIN Female Power Splitter for mobile signal booster

Features： Wide Frequency Band for 4G and 5G, 698-2700MHz, 617-3800MHz, 698-3800MHz; Low Insertion Loss & Low VSWR; Low PIM, supports -140/-150/-155/-160dBc; N, 7/16 DIN, 4.3-10 Female connectors are available; Use for equal splitting of high power RF signals with minimal reflections or loss; Multi-type power splitters are available in 2-way, 3-way and 4-way; High Reliability, IP65 & IP67 waterproof.

1.0-2.3 Jack Female Right Angle Connector Solder Attachment Thru Hole for PCB

1.0-2.3 Connector Features： Can terminate to coax or PCB (printed circuit board); Can be jack or plug gender in standard polarity with 50 or 75 ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead or mount-less; Attachment methods include crimp/solder, solder or solder/solder; Body is brass or stainless steel.

N Female to SMA Male 4 Hole Flange Mount Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

RF Coaxial 7-16 DIN Female Bulkhead to 7-16 DIN Female Connector Cable Assembly with Super Flexible RG402 Cable

7-16 DIN Cable assembly Features： Can be combined with 4.3-10, 7-16 DIN, BNC, N, NEX10, QMA or SMA connector; Body Can be 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

GSM GPRS Antenna 3dBi 900MHz 1800MHz Indoor Omni Directional Bend Router GSM GPRS Rubber Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

2 way 5-2400MHz TV Satellite splitter for antenna satellite splitter CATV Power Splitter

Features： Zinc die-cast housing, tin-plated Light weight and compact size Easy installation with two edge hole sites Low insertion loss, high isolation, perfect performance index Designed for SATV/CATV Power passing-24V 0.8A(MAX.) All ports F-(f)connector,75Ohm

1.0-2.3 Jack Female Straight Bulkhead Mount Connector Solder Attachment Thru Hole for PCB

1.0-2.3 Connector Features： Can terminate to coax or PCB (printed circuit board); Can be jack or plug gender in standard polarity with 50 or 75 ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead or mount-less; Attachment methods include crimp/solder, solder or solder/solder; Body is brass or stainless steel.

N Female to SMA Male 4 Hole Flange Mount Waterproof Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

MINI DIN 4.3-10 Male to 7-16 DIN Male with 1/2 Superflexible Cable Assembly

4.3-10 Cable assembly Features： Can be combined with 2.2-5, 4.3-10, 7-16 DIN, N, NEX10, QMA, or SMA connector; Body Can be right angle or straight connectors; Body Can be 4 hole panel, bulkhead or standard mount connectors; Cable Can use flexible or corrugated cable.

890-960MHz 1710-1880MHz 2G 3G 4G LTE 5G Antenna GSM GPRS WiFi Antenna for Communications

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

3 Way 5-2400MHz satellite splitter Port TV Signal Satellite Coaxial Cable Switcher F Connector Splitter

Features： Zinc die-cast housing, tin-plated Light weight and compact size Easy installation with two edge hole sites Low insertion loss, high isolation, perfect performance index Designed for SATV/CATV Power passing-24V 0.8A(MAX.) All ports F-(f)connector,75Ohm

1.0-2.3 Jack Female Straight Bulkhead Mount Push-On Connector Solder Attachment End Launch for PCB

1.0-2.3 Connector Features： Can terminate to coax or PCB (printed circuit board); Can be jack or plug gender in standard polarity with 50 or 75 ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead or mount-less; Attachment methods include crimp/solder, solder or solder/solder; Body is brass or stainless steel.

N Female to SMA Female 4 Hole Flange Mount Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

4.3-10 MINI DIN Male to Right Angle 7-16 DIN Male Connector Assembly with 1/2 Superflexible Cable

4.3-10 Cable assembly Features： Can be combined with 2.2-5, 4.3-10, 7-16 DIN, N, NEX10, QMA, or SMA connector; Body Can be right angle or straight connectors; Body Can be 4 hole panel, bulkhead or standard mount connectors; Cable Can use flexible or corrugated cable.

Waterproof 8dBi 10dBi Outdoor Omni Direction N Female Connector Pole Mount GSM GPRS Fiberglass Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

4 Way 5-2400MHz F Connector Indoor Audio CATV TV Satellite Power Splitter Satellite Splitter

Features： Zinc die-cast housing, tin-plated Light weight and compact size Easy installation with two edge hole sites Low insertion loss, high isolation, perfect performance index Designed for SATV/CATV Power passing-24V 0.8A(MAX.) All ports F-(f)connector,75Ohm

1.0-2.3 Jack Female Socket Right Angle Bulkhead Connector Crimp Solder Attachment For RG174 RG316 RG188 Cable

1.0-2.3 Connector Features： Can terminate to coax or PCB (printed circuit board); Can be jack or plug gender in standard polarity with 50 or 75 ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead or mount-less; Attachment methods include crimp/solder, solder or solder/solder; Body is brass or stainless steel.

N Female to SMA Female 4 Hole Flange Mount Waterproof Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

MINI DIN 4.3-10 Male to NEX10 Male RF Coaxial Cable Assembly with 1/4 Superflexible Cable

4.3-10 Cable assembly Features： Can be combined with 2.2-5, 4.3-10, 7-16 DIN, N, NEX10, QMA, or SMA connector; Body Can be right angle or straight connectors; Body Can be 4 hole panel, bulkhead or standard mount connectors; Cable Can use flexible or corrugated cable.

Hot Selling Outdoor Omni Direction Waterproof 4dBi 6dBi 900MHz 1800MHz N Female Connector Pole Mount GSM GPRS Fiberglass Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

6 way 5-2400MHz splitter CATV TV Satellite Antenna signal splitter For TV Satellite Receiver

Features： Zinc die-cast housing, tin-plated Light weight and compact size Easy installation with two edge hole sites Low insertion loss, high isolation, perfect performance index Designed for SATV/CATV Power passing-24V 0.8A(MAX.) All ports F-(f)connector,75Ohm

1.0-2.3 Jack Female Straight Bulkhead Connector Crimp Solder Attachment For RG174 RG316 RG188 LMR100 Cable

1.0-2.3 Connector Features： Can terminate to coax or PCB (printed circuit board); Can be jack or plug gender in standard polarity with 50 or 75 ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead or mount-less; Attachment methods include crimp/solder, solder or solder/solder; Body is brass or stainless steel.

N Female to SMA Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

SMA Female Connector Cable Assembly with Super Flexible RG402 Cable

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

High Quality Omni Direction Waterproof 6dBi 8dBi 900MHz 1800MHz N Female Connector Pole Mount GSM GPRS Fiberglass Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

8 way Antenna TV Wide Band satellite catv splitters 5-2400MHz satellite splitter

Features： Zinc die-cast housing, tin-plated Light weight and compact size Easy installation with two edge hole sites Low insertion loss, high isolation, perfect performance index Designed for SATV/CATV Power passing-24V 0.8A(MAX.) All ports F-(f)connector,75Ohm

1.0-2.3 Plug Male Right Angle Connector Crimp Solder Attachment for RG174 RG316 RG188 LMR100 Cable

1.0-2.3 Connector Features： Can terminate to coax or PCB (printed circuit board); Can be jack or plug gender in standard polarity with 50 or 75 ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead or mount-less; Attachment methods include crimp/solder, solder or solder/solder; Body is brass or stainless steel.

New N Female to SMA Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

SMA Right Angle Male to BNC Female RF Coaxial Connector Cable Assembly with RG316 Cable

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

5dBi Outdoor Omni Direction N Male Right Angle Connector Pole Mount GSM GPRS Fiberglass for Base Station Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

4 Way Audio CATV TV Distributor zinc casing for TV antenna signal F Connector Satellite Power Splitter

Features： Zinc die-cast housing, tin-plated Light weight and compact size Easy installation with two edge hole sites Low insertion loss, high isolation, perfect performance index Designed for SATV/CATV Power passing-24V 0.8A(MAX.) All ports F-(f)connector,75Ohm

All products