Factory Supply antenna ,All Kinds Of Electronic Products

IPEX4 MHF4 UFL4 Female 2.4G Receiver Antenna Connector for Low loss RF 0.81mm Jumper Pigtail Cable

Features： Nominal mated height of 1.9 or 2.4mm (Max. 2.0 or 2.5mm ) ; Accepts high frequency transmission; Small mounting area The receptacle occupies an area of 7.7mm; Light weight; Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated )cable; Automatic board placement; Simple connector mating / unmating; Verification of the fully mated condition.

N Female to RP TNC Male Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

SMA Female PCB Mount Connector to UFL IPEX with 1.37mm Cable Assembly-7076/7053/7045/7038/7035/7034/7025/7020

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

3-5dBi 698-960MHz 1710-2700MHz Wireless WLAN WIFI Antenna SMA Male Connector with 3Meter Cable

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

High Power 400W N Type Male Terminator DC-3GHz 50ohm Dummy Load RF Termination Load

Features： High Peak Power; Low VSWR; Multiple IP Degree Conditions; Powers 2W to 500W; Low PIM Performance; N,DIN, 4.3-10 Connectors; Low Cost Design, Design to Cost.

IPEX MHF UFL female Connector for 0.81mm 1.13mm 1.37mm RG174 RG316 Cable

Features： Nominal mated height of 1.9 or 2.4mm (Max. 2.0 or 2.5mm ) ; Accepts high frequency transmission; Small mounting area The receptacle occupies an area of 7.7mm; Light weight; Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated )cable; Automatic board placement; Simple connector mating / unmating; Verification of the fully mated condition.

N Female to TNC Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

SMA Female PCB Mount Connector to UFL IPEX with 1.13mm Cable Assembly

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

4G LTE Omni Direction Antenna 3-5dBi 698-960MHz 1710-2700MHz SMA Male Connector with RG174 Cable

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

High Power 500W N Male Dummy Load 50ohm RF Termination Loads

Features： High Peak Power; Low VSWR; Multiple IP Degree Conditions; Powers 2W to 500W; Low PIM Performance; N,DIN, 4.3-10 Connectors; Low Cost Design, Design to Cost.

IPEX1 MHF1 UFL1 Male Plug Connector IPEX4 MHF4 UFL4 Female Jack Connector for RF 0.81mm Coaxial Jumper Cable

Features： Nominal mated height of 1.9 or 2.4mm (Max. 2.0 or 2.5mm ) ; Accepts high frequency transmission; Small mounting area The receptacle occupies an area of 7.7mm; Light weight; Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated )cable; Automatic board placement; Simple connector mating / unmating; Verification of the fully mated condition.

New N Female to TNC Female Straight RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

SMA Right Angle Male to MMCX Right Angle Plug RF Coaxial Connector Cable Assembly with RG316 Cable

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

698-960MHz 1710-2700MHz 4dBi 6dBi Omni Direction 4G LTE Antenna Magnetic Mount SMA Connector for Car Mobile Communication

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

25W N Type Female Connector DC-3GHz Round Microwave RF Dummy Load 50ohm Terminator for IBS DAS TELECOM

Features： High Peak Power; Low VSWR; Multiple IP Degree Conditions; Powers 2W to 500W; Low PIM Performance; N,DIN, 4.3-10 Connectors; Low Cost Design, Design to Cost.

IPEX1 MHF1 UFL1 Male Plug Connector IPEX1 MHF1 UFL1 Female Jack Connector for RF 1.13mm Coaxial Jumper Cable

Features： Nominal mated height of 1.9 or 2.4mm (Max. 2.0 or 2.5mm ) ; Accepts high frequency transmission; Small mounting area The receptacle occupies an area of 7.7mm; Light weight; Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated )cable; Automatic board placement; Simple connector mating / unmating; Verification of the fully mated condition.

Low Pim 7-16 Din Male to 4.3-10 Mini Din Male RF Connector Adapter

7-16 DIN adapters Features： Allow to interface 7-16 DIN connectors with 7-16 DIN, 4.3-10, N, SMA or TNC connectors; Very robust, extremely stable and waterproof; Has straight or right angle versions; Offers standard, low PIM or high performance options.

Straight RP SMA Male to MMCX Plug Connector RF Coaxial Cable Assembly with RG402 Cable

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

4G LTE 3G 2G Wireless Communication 698-960MHz 1710-2700MHz 5dBi Omni Direction SMA Male Connector Terminal Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

50W N Female Jack Connector Coaxial Dummy Load DC-3GHz RF Dummy Load 50ohm Terminator

Features： High Peak Power; Low VSWR; Multiple IP Degree Conditions; Powers 2W to 500W; Low PIM Performance; N,DIN, 4.3-10 Connectors; Low Cost Design, Design to Cost.

IPEX4 MHF4 UFL4 Male Plug Connector IPEX4 MHF4 UFL4 Female Jack Wifi Antenna Connector for RF 0.81mm Cable

Features： Nominal mated height of 1.9 or 2.4mm (Max. 2.0 or 2.5mm ) ; Accepts high frequency transmission; Small mounting area The receptacle occupies an area of 7.7mm; Light weight; Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated )cable; Automatic board placement; Simple connector mating / unmating; Verification of the fully mated condition.

Low Pim 7-16 Din Male to 4.3-10 Mini Din Female Straight RF Connector Adapter

7-16 DIN adapters Features： Allow to interface 7-16 DIN connectors with 7-16 DIN, 4.3-10, N, SMA or TNC connectors; Very robust, extremely stable and waterproof; Has straight or right angle versions; Offers standard, low PIM or high performance options.

RP SMA Male Right Angle to RP SMA Male Right Angle Connector RF Coaxial Cable Assembly with RG174 Cable

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

698-960MHz 1710-2700MHz 2dBi Omni Direction Collapsible Rotatable 4G LTE Terminal Antenna with SMA Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

100W N Female Connector DC-3GHz RF Coaxial Round Dummy Load 50ohm Termination

Features： High Peak Power; Low VSWR; Multiple IP Degree Conditions; Powers 2W to 500W; Low PIM Performance; N,DIN, 4.3-10 Connectors; Low Cost Design, Design to Cost.

TNC Female Straight Connector Solder Attachment 4 Hole Flange Mount with Solder Cup

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim L29 7-16 Din Male to 7-16 Din Male Straight RF Connector Adapter

7-16 DIN adapters Features： Allow to interface 7-16 DIN connectors with 7-16 DIN, 4.3-10, N, SMA or TNC connectors; Very robust, extremely stable and waterproof; Has straight or right angle versions; Offers standard, low PIM or high performance options.

SMA Male Right Angle to SMA Male Right Angle RF Coaxial Connector Cable Assembly with RG174 Cable

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

4G LTE 5G WiFi Antennalte Signal Booster Indoor Antenna 698-960MHz 1710-2700MHz Omni Direction Collapsible Rotatable with SMA Male Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

2W DC-6GHz Up to 26.5GHz SMA Male RF Load Terminator 50ohm Dummy Load

Features： Wide Frequency Band; 2G/3G/4G/LTE Coverage; Low VSWR; Widely used for In-building Solutions; Low Insertion Loss.

TNC Female Straight Waterproof Connector 4 Hole Flange Mount Solder Attachment with Pin Terminal

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim L29 7-16 Din Male to 7-16 Din Female Straight RF Connector Adapter

7-16 DIN adapters Features： Allow to interface 7-16 DIN connectors with 7-16 DIN, 4.3-10, N, SMA or TNC connectors; Very robust, extremely stable and waterproof; Has straight or right angle versions; Offers standard, low PIM or high performance options.

SMA Bulkhead Female to SMA Bulkhead Female Connector Cable Assembly with RG405 Cable

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

4G LTE Terminal Antenna 5dBi Wireless Omni Direction MHF UFL IPEX Connector Clip-on Mount for Automobile Mobile Handheld Walkie-talkie Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

5W SMA Male Connector Terminator Load DC-3GHz RF Dummy Load 50ohm Calibration

Features： Wide Frequency Band; 2G/3G/4G/LTE Coverage; Low VSWR; Widely used for In-building Solutions; Low Insertion Loss.

TNC Female Straight Connector Solder Attachment 4 Hole Flange Mount with Slot Terminal

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim L29 7-16 Din Male to 7-16 Din Female Right Angle RF Connector Adapter

7-16 DIN adapters Features： Allow to interface 7-16 DIN connectors with 7-16 DIN, 4.3-10, N, SMA or TNC connectors; Very robust, extremely stable and waterproof; Has straight or right angle versions; Offers standard, low PIM or high performance options.

Straight SMA Male to N Male Coaxial Connector Jumper Cable Assembly with RG316 Cable

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

2.5dBi 4G LTE Terminal Antenna Wireless Omni Direction Clip-on Mount with MHF UFL IPEX Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.