Factory Supply antenna ,All Kinds Of Electronic Products

RP TNC Male Right Angle Connector Crimp Solder Attachment for RG55 RG141 RG142 RG223 RG400 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim 2.2-5 Male to 7-16 DIN Female RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, 7-16 DIN, 4.3-10, 3.5mm, or 2.2-5 connectors; Require low PIM in order to avoid interference in network quality during high speed data transmission; Flexibility in installation with the ability to blind mate； Lightweight and can accommodate various cable types; Both indoor and outdoor applications.

Factory Price UFL to UFL IPEX RF Coaxial Connector Assembly with 1.13mm RF Jumper Cable

U.FL Cable assembly Features： Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.

Waterproof Combo Antenna 2 in 1 SMA Connector Screw Mount GPS GLONAS 4G LTE Combination Antenna for GPS Car Phone Navigation

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

5W MINI DIN 4.3-10 Male RF Coaxial Dummy Load Terminator DC-3GHz/4GHz Dummy Load Termination

Features： Wide Frequency Band, can cover 4G/5G system; Low VSWR; Low PIM3; N,7-16 DIN, 4.3-10 connectors are available; IP65/IP67 Waterproof Standard.

RP TNC Male Right Angle Connector Crimp Solder Attachment for LMR400 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim 2.2-5 Male to N Male RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, 7-16 DIN, 4.3-10, 3.5mm, or 2.2-5 connectors; Require low PIM in order to avoid interference in network quality during high speed data transmission; Flexibility in installation with the ability to blind mate； Lightweight and can accommodate various cable types; Both indoor and outdoor applications.

Factory Customized UFL to UFL IPEX RF Coaxial Connector Assembly with 1.37mm RF Jumper Cable

U.FL Cable assembly Features： Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.

Outdoor Omni Directional Screw Mount Combined 2 in 1 GPS Glonass GSM Combo Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

High Quality 5W Dummy Load DC-6GHz 50ohm MINI DIN 4.3-10 Male Connector RF Load for IBS DAS

Features： Wide Frequency Band, can cover 4G/5G system; Low VSWR; Low PIM3; N,7-16 DIN, 4.3-10 connectors are available; IP65/IP67 Waterproof Standard.

TNC Male Right Angle Connector Solder Attachment for RG402 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim 2.2-5 Female to N Female RF Connector Adapter

N type adapters Features： Allow to interface N connectors with N, 7-16 DIN, 4.3-10, 3.5mm, or 2.2-5 connectors; Require low PIM in order to avoid interference in network quality during high speed data transmission; Flexibility in installation with the ability to blind mate； Lightweight and can accommodate various cable types; Both indoor and outdoor applications.

Low Loss UFL IPEX Plug Antenna Jumper Pigtail Cable Assembly with RF 0.81mm Cable

U.FL Cable assembly Features： Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.

4G GPS 2 in 1 Combination Antenna Combo Navigation Antenna Adhesive Mount with Fakra Connector RG174 Cable

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

10W MINI DIN 4.3-10 Male RF Coaxial Termination DC-3GHz/4GHz Dummy Load 50ohm

Features： Wide Frequency Band, can cover 4G/5G system; Low VSWR; Low PIM3; N,7-16 DIN, 4.3-10 connectors are available; IP65/IP67 Waterproof Standard.

TNC Male Right Angle Connector Solder Attachment for 3/8'' Superflex Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim NEX10 Male to N Male Straight RF Connector Adapter

Features： Screw-type and a push-pull locking mechanism are available; Maximum passive intermodulation (IM3) of -165 dBc; Low VSWR; Applies silver-plating on all inner and outer conductor parts; Suited for transmitting medium or high power indoors and outdoors.

5.8Ghz FPV Linier Antenna UFL to UFL IPEX RF Coaxial Connector Assembly with RG178 RF Jumper Cable

U.FL Cable assembly Features： Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.

Combo Antenna 4G 5G 2 in 1 Screw Mount Antenna with SMA Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

50W Low VSWR MINI DIN 4.3-10 Male RF Coaxial Termination Wide Frequency DC-4GHz Round Dummy Load

Features： Wide Frequency Band, can cover 4G/5G system; Low VSWR; Low PIM3; N,7-16 DIN, 4.3-10 connectors are available; IP65/IP67 Waterproof Standard.

N Male Right Angle Connector Clamp Solder Attachment for RG58 LMR195 Cable

N type features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, clamp/solder (captive contact), crimp/solder, field replaceable, solder or solder/solder; Body is brass or stainless steel.

Low Pim NEX10 Male to N Female Straight RF Connector Adapter

Features： Screw-type and a push-pull locking mechanism are available; Maximum passive intermodulation (IM3) of -165 dBc; Low VSWR; Applies silver-plating on all inner and outer conductor parts; Suited for transmitting medium or high power indoors and outdoors.

UFL Plug to UFL IPEX Jack RF Coaxial Connector Assembly with 0.81/1.13/1.37mm RF Jumper Cable

U.FL Cable assembly Features： Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.

2 in 1 4G LTE Combo Antenna Omni Directional Magnetic and Stick Mount Combination Antenna with SMA Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

High Quality 50W MINI DIN 4.3-10 Male RF Dummy Load DC-3GHz 50ohm Termination Load

Features： Wide Frequency Band, can cover 4G/5G system; Low VSWR; Low PIM3; N,7-16 DIN, 4.3-10 connectors are available; IP65/IP67 Waterproof Standard.

TNC Male Right Angle Connector Clamp Solder Attachment for RG213 RG8 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim NEX10 Female to N Female Straight RF Connector Adapter

Features： Screw-type and a push-pull locking mechanism are available; Maximum passive intermodulation (IM3) of -165 dBc; Low VSWR; Applies silver-plating on all inner and outer conductor parts; Suited for transmitting medium or high power indoors and outdoors.

UFL Plug to Fakra Plug Bulkhead Mount Coaxial Connector Assembly with 1.37mm RF Cable

U.FL Cable assembly Features： Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.

Outdoor Screw Mount Waterproof 4G LTE WIFI 2 in 1 Combo Antenna with SMA Connecto

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

Factory Price 100W RF Termination Load MINI DIN 4.3-10 DC-3GHz/4GHz Dummy Load Termination Terminal

Features： Wide Frequency Band, can cover 4G/5G system; Low VSWR; Low PIM3; N,7-16 DIN, 4.3-10 connectors are available; IP65/IP67 Waterproof Standard.

TNC Male Straight Connector Solder Attachment for RG402 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim NEX10 Female to SMA Female Straight RF Connector Adapter

Features： Screw-type and a push-pull locking mechanism are available; Maximum passive intermodulation (IM3) of -165 dBc; Low VSWR; Applies silver-plating on all inner and outer conductor parts; Suited for transmitting medium or high power indoors and outdoors.

UFL IPEX to Fakra Plug Bulkhead Mount Coaxial Connector Assembly with 1.13mm RF Cable

U.FL Cable assembly Features： Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.

Outdoor GPS WIFI 4G LTE 3 in 1 Combo Antenna Omni Directional Waterproof Screw Mount with SMA Connector Combined Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

5W BNC Male Termination Load DC-3GHz RF Coaxial Dummy Load Termination Power

Features： Low VSWR & Low Attenuation ; 3G/4G/5G LTE Coverage; Indoor & Outddoor applicationn; Wide Frequency Band ; Widely used for in-building Soloution; All Sepcifications can be changed as you enquirements.

New TNC Male Straight Connector Solder Attachment for RG402 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

SMA Male to BNC Female Straight RF Connector Adapter

SMA adapters Features： Allow to interface SMA connectors with 1.0-2.3, 1.85mm, 2.4mm, 3.5mm, 7-16 DIN, BNC, F, MCX, MMCX, N, QMA, SMA, SMB, SMC, SMP, TNC, UHF or U.FL connectors; Has female to female, female to jack, female to male, female to plug, female to receptacle, female to sexless, male to female, male to jack, male to male, male to plug, male to receptacle or male to sexless gender designs; Has standard polarity or reverse polarity SMA (RP-SMA) options; Has bulkhead, 4 hole panel or mountless configurations; Has quick disconnect (QD) or standard interfaces.

All products