Company profile

All products

Flanged Resilient Seated OS&Y Gate Valve

The gate valves are specially designed gate valves for fire protection pipeline systems, and their core function is to reliably connect or cut off water flow.

Worm Gear Wafer Butterfly Valve

The turbine fire butterfly valve achieves the opening and closing of the butterfly plate through a set of turbine transmission devices.

Rubber Flap Check Valve

Rubber flap check valves are automatic valves specially designed for pipeline systems transporting liquids, slurries or gases.

Wet System Fire Alarm Valve

The alarm check valve is a water flow alarm device designed for vertical installation in the main supply to a wet pipe sprinkler system.

Adjustable Pressure Reducing Valve

A 200X Pressure Reducing Valve (PRV) is a hydraulically operated, diaphragm-actuated control valve designed to maintain a steady, pre-set downstream pressure regardless of fluctuations in the upstream (inlet) pressure or flow demand.

Grooved Resilient Seated OS&Y Gate Valve

Grooved fire gate valves are a new type of valve that combines the reliable control function of traditional gate valves with the quick installation advantage of grooved pipe fittings.

Flanged Resilient Seated NRS Gate Valve

The flanged elastic seat concealed stem gate valve is a type of valve that rotates the valve stem by turning the handwheel without raising or lowering it, thereby driving the internal gate to move up and down to achieve the on-off of the fluid.

Grooved Resilient Seated NRS Gate Valve

The grooved elastic valve seat non-rising stem gate valve is a featured product designed to meet the demands of limited space and quick installation.

Wafer Butterfly Valve with Tamper Switch

The wafer-type butterfly valve with a signal feedback device is an automated valve that integrates the fluid control function of the wafer-type butterfly valve with the monitoring function of the signal feedback device (commonly known as a tamper-proof switch or signal switch).

Wafer Butterfly Valve with Lever Handle

The wafer-type butterfly valve is a type of valve in which the opening and closing part is a disc-shaped butterfly plate that can rotate around the inner axis of the valve body.

Grooved Butterfly Valve with Tamper Switch

Grooved Butterfly Valve with Tamper Switch is a critical security device integrating mechanical control and electronic monitoring.

Grooved Butterfly Valve with Lever Handle

The grooved handle butterfly valve is a type of valve that directly drives the butterfly plate to rotate 90° by rotating the handle and is connected by grooved clamps. It perfectly combines the convenience of butterfly valves with the installation efficiency of grooved connections, making it the preferred device for frequent and rapid manual operations in environments with limited space.

Diaphragm Fire Alarm Deluge Valve

Deluge Valve is known as a system control valve in a deluge system, used for fast application of water in a spray system. Deluge valve protects areas such as power transformer installation, storage tank, conveyor protection and other industrial application etc. With the addition of foaming agent they do protect aircraft hanger and inflammable liquid fire.

Pressure Relief Valve for Fire Fighting Systm

The 500X pressure relief/pressure holding valve is mainly used in fire protection or other water supply systems to prevent system overpressure or maintain the pressure of the fire protection water supply system. Ensure the unobstructed circulation of the system to enable the valves to operate safely and reliably

Flange Foot Check Valve

Flanged foot check valves, often also known as bottom valves, are a special type of check valve specifically installed at the end of the suction pipe of a water pump.

Flange End Silent Check Valve

The silent check valve is a high-performance check valve specially designed to eliminate the Water Hammer effect and loud noise caused by the sudden backflow of the interrupted medium in the pipeline system. It represents an important technological upgrade of traditional swing and lift check valves.

Flanged Swing Check Valve

The flange swing check valve is a fundamental, robust, and widely used component for preventing backflow in piping systems. Its flanged ends make it ideal for bolted, permanent installations in medium to large pipe sizes where flow is consistent and the risk of water hammer is understood and managed.

Grooved Swing Check Valve

It trades the ultra-high pressure capability of flanged valves for significant gains in installation speed, flexibility, and cost-effectiveness. It is the go-to choice for a massive range of commercial and industrial building systems, especially fire protection.

Flanged Y Strainer

Its core mission is to filter and remove solid particle impurities such as rust, sand, and pipe debris from fluid media like water, steam, oil, and gas, thereby protecting downstream precision equipment from damage or blockage.

Grooved Y Strainer

Its purpose remains the same: to protect sensitive and expensive downstream equipment—such as pumps, control valves, spray nozzles, and meters—from damage, clogging, and wear caused by pipeline scale, rust, weld slag, and other particulates.

Rubber Flexible Joint

It is a flexible connection element used in pipeline systems. It is composed of an elastic rubber body and embedded metal flanges or threads. With its outstanding compensation, vibration reduction and noise reduction capabilities, it has become an indispensable key component in modern pipeline engineering.

Brass Forged Gate Valve 2 1/2" Female NH x 2 1/2" Male NH

The Brass Forged Gate Valve is a high-performance fire protection component, engineered for precise water flow control in hydrant, standpipe, and fire pump systems, featuring durable brass construction and UL certification for reliable emergency response.

Showing 1 to 1 of 1 (1 Pages)

click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.