Special Offers

Products

LG Standard Orifice Meter Throttle Device

There are several methods to measure the flow rate of medium through pipelines, but the most widely used and common one is differential pressure flow meter.It is composed of the throttle device and the differential pressure gauge or the throttle device and the differential pressure transmitter together with the secondary table.Typical application of flow throttling device: medium and high velocity gas such as steam and compressed air.

LC Digital Oval Gear Flow Meter

LC series oval gear flow meter is a direct reading accumulative meter. It is a volumetric Flow meter that measures the summation of liquid flow through the pipeline. Can be widely used in petroleum, chemical, medical and health departments of the flow measurement.

LZ Liquid Crystal Display Metal Tube Rotameter

LZ metal tube rotameter is used to measure the volume flow of liquid and gas in closed pipe continuously.It can be widely used for measuring liquid and gas flow in national defense, chemical industry, petroleum, metallurgy, electric power, environmental protection, medicine and light industry.

PT Pressure Or Differential Pressure Transducer

PT pressure or differential pressure transducer adopts advanced technology, safe and reliable, high precision and pulse transmission;It is widely used in the measurement of pressure parameters of industrial pipelines.

YI Ultrasonic Liquid Level Meter And Open Channel Flow Meter

YI ultrasonic liquid level meter and open channel flow meter are widely used in the physical level measurement of petroleum, chemical industry, water treatment, water conservancy, food, grain and other industries. They are safe, clean, high precision, long life, stable and reliable, and easy to install and maintain.

Liquid Level Open Channel Flow Meter Temperature Transmitter

The temperature transmitter is generally composed of temperature element, transition lead, insulating tube, protective tube, junction box, fixing device, etc., dividing number Pt100, Cu50 thermistor, and K\N\E\J\T thermocouple.

XSN Intelligent Flow Control Instrument

The XSN intelligent flow control instrument is combined with the vortex street and the sensor of the turbine pulse signal to control the flow quantitatively.

XSJ Secondary Instrument Series Flow Integrator

XSJ series flow integrator works with various flow sensors and transmitters to complete the measurement, transformation, transmission and control of instantaneous flow and carry out the cumulative calculation at the same time.

XSJB Series Thermal Energy Integrator

XSJB series thermal energy integrator is an intelligent instrument designed to give full play to the advantages of digital technology and software technology.

XSR22 Series Compensation Flow Integral Recorder

XSR22 Series compensation flow integral Recorder can measure, transform, compensate, calculate, display, record, dump, communication and control the flow with all kinds of sensors and transmitters.

XSR30/XSR70 Secondary Instrument Paperless Recorder

XSR30/XSR70 paperless recorder is composed of LCD screen, key, ARM microprocessor, main board, main power supply, external power supply, intelligent channel board, large capacity FLASH, etc.

FS1015CL Series Gas Mass Flow Sensors

FS1015CL series gas mass flow sensor is specially designed for the measurement and process control of various kinds of medical gases. The product is made of the microcomputer system (MEMS) flow sensor chip developed by our company, which is suitable for all kinds of clean gases.Low cost, easy to install, no need of temperature pressure compensation, can replace the volume type or pressure difference type of traditional flow meter.The measurement range is up to 150SLPM, and the ISO 15mm connection mode is applicable to various medical equipment such as ventilator and anesthesia machine.

FS4001 Series Gas Mass Flow Sensors

FS4001 series gas mass flow sensors are specially designed for the measurement and process control of various low-flow gases.This series of sensors are manufactured by microelectromechanical system (MEMS) flow sensor chip developed by our company.Suitable for all kinds of clean and dry gases.

FS4003/08 Series Gas Mass Flow Sensors

FS4003/08 series gas mass flow sensor is specially developed for common gas flow measurement.The sensor can directly measure gas mass flow without bypass setting and low pressure loss.The sensor can be used for flow monitoring of air or nitrogen in the purification industry, as well as for environmental detection industry (such as atmospheric sampler) and analytical instrument (such as chromatographic analyzer).

FS5001L Series Gas Mass Flow Sensors

FS5001B series gas mass flow sensor is specially designed for the measurement and process control of various types of low-flow gas. All of these sensors are made by the microcomputer point system (MEMS) flow sensor chip developed by our company, which is applicable to various clean and dry gases.The sensor adopts label installation, which makes the installation size more compact, and can easily realize multi-sensor integration in small space.

FS6122 Series Medical CPAP Sensor Fusion

FS6122 series medical CPAP sensor module is designed for the CPAP system of domestic ventilator (continuous positive pressure ventilation system).The sensor integrates MEMS mass flow chip and MEMS pressure chip, thus providing the necessary output signal for CPAP system.

FS7002 Series Gas Mass Flow Sensors

The FS7002 mass flow rate/anti-blockage sensor is made by using the microcomputer electrical system (MEMS) flow sensor chip independently developed by our company, which is suitable for cleaning and drying gases of various general purposes.Unique packaging technology enables it to measure flow in different ranges under the same pipe diameter, mass production to ensure high reliability, high performance and low cost.

FS8000 Series Gas Mass Flow Sensors

• Flow Range: FS8001:(0~500)sccm;FS8003:(0~6)SLPM • Accuracy: ± (2+0.5FS) • Repeatability: ± 1.0 • Output: Linear:analog voltage0.5~4.5VDC/I²C • High sensitivity • Low pressure drop • Miniature design for easy installation

MF4000 Series MEMS Gas Flow Meters

MF4000 series gas mass flowmeter is specially designed for measuring the flow of low-speed airflow in gas pipelines with pipe diameter of 3mm-8mm. Thread and various quick interfaces can easily realize mechanical interface conversion and meet the requirements of various gas pipelines of users. This product can be used for various industrial applications such as process control and atmospheric sampling.

MF5000 series Gas Mass Flow Meters

ME5000 series gas mass flowmeter is the company combined with micro-electromechanical system (MEMS) flow sensor chip technology and many years of computer adaptive technology experience, the development of intelligent electronic gas mass flowmeter, the main technical performance in the international leading level, with high sensitivity, high precision, large range ratio and other characteristics.

Showing 1 to 2 of 2 (1 Pages)

click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.