ROHOconnector: Coaxial Connectors, Cable Assembly, GPS Antennas

50W N Female Jack Connector Coaxial Dummy Load DC-3GHz RF Dummy Load 50ohm Terminator

Features： High Peak Power; Low VSWR; Multiple IP Degree Conditions; Powers 2W to 500W; Low PIM Performance; N,DIN, 4.3-10 Connectors; Low Cost Design, Design to Cost.

IPEX4 MHF4 UFL4 Male Plug Connector IPEX4 MHF4 UFL4 Female Jack Wifi Antenna Connector for RF 0.81mm Cable

Features： Nominal mated height of 1.9 or 2.4mm (Max. 2.0 or 2.5mm ) ; Accepts high frequency transmission; Small mounting area The receptacle occupies an area of 7.7mm; Light weight; Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated )cable; Automatic board placement; Simple connector mating / unmating; Verification of the fully mated condition.

Low Pim 7-16 Din Male to 4.3-10 Mini Din Female Straight RF Connector Adapter

7-16 DIN adapters Features： Allow to interface 7-16 DIN connectors with 7-16 DIN, 4.3-10, N, SMA or TNC connectors; Very robust, extremely stable and waterproof; Has straight or right angle versions; Offers standard, low PIM or high performance options.

RP SMA Male Right Angle to RP SMA Male Right Angle Connector RF Coaxial Cable Assembly with RG174 Cable

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

698-960MHz 1710-2700MHz 2dBi Omni Direction Collapsible Rotatable 4G LTE Terminal Antenna with SMA Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

100W N Female Connector DC-3GHz RF Coaxial Round Dummy Load 50ohm Termination

Features： High Peak Power; Low VSWR; Multiple IP Degree Conditions; Powers 2W to 500W; Low PIM Performance; N,DIN, 4.3-10 Connectors; Low Cost Design, Design to Cost.

TNC Female Straight Connector Solder Attachment 4 Hole Flange Mount with Solder Cup

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim L29 7-16 Din Male to 7-16 Din Male Straight RF Connector Adapter

7-16 DIN adapters Features： Allow to interface 7-16 DIN connectors with 7-16 DIN, 4.3-10, N, SMA or TNC connectors; Very robust, extremely stable and waterproof; Has straight or right angle versions; Offers standard, low PIM or high performance options.

SMA Male Right Angle to SMA Male Right Angle RF Coaxial Connector Cable Assembly with RG174 Cable

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

4G LTE 5G WiFi Antennalte Signal Booster Indoor Antenna 698-960MHz 1710-2700MHz Omni Direction Collapsible Rotatable with SMA Male Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

2W DC-6GHz Up to 26.5GHz SMA Male RF Load Terminator 50ohm Dummy Load

Features： Wide Frequency Band; 2G/3G/4G/LTE Coverage; Low VSWR; Widely used for In-building Solutions; Low Insertion Loss.

TNC Female Straight Waterproof Connector 4 Hole Flange Mount Solder Attachment with Pin Terminal

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim L29 7-16 Din Male to 7-16 Din Female Straight RF Connector Adapter

7-16 DIN adapters Features： Allow to interface 7-16 DIN connectors with 7-16 DIN, 4.3-10, N, SMA or TNC connectors; Very robust, extremely stable and waterproof; Has straight or right angle versions; Offers standard, low PIM or high performance options.

SMA Bulkhead Female to SMA Bulkhead Female Connector Cable Assembly with RG405 Cable

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

4G LTE Terminal Antenna 5dBi Wireless Omni Direction MHF UFL IPEX Connector Clip-on Mount for Automobile Mobile Handheld Walkie-talkie Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

5W SMA Male Connector Terminator Load DC-3GHz RF Dummy Load 50ohm Calibration

Features： Wide Frequency Band; 2G/3G/4G/LTE Coverage; Low VSWR; Widely used for In-building Solutions; Low Insertion Loss.

TNC Female Straight Connector Solder Attachment 4 Hole Flange Mount with Slot Terminal

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim L29 7-16 Din Male to 7-16 Din Female Right Angle RF Connector Adapter

7-16 DIN adapters Features： Allow to interface 7-16 DIN connectors with 7-16 DIN, 4.3-10, N, SMA or TNC connectors; Very robust, extremely stable and waterproof; Has straight or right angle versions; Offers standard, low PIM or high performance options.

Straight SMA Male to N Male Coaxial Connector Jumper Cable Assembly with RG316 Cable

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

2.5dBi 4G LTE Terminal Antenna Wireless Omni Direction Clip-on Mount with MHF UFL IPEX Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

10W SMA Male DC-3GHz Connector RF Termination Load 50ohm Dummy Load

Features： Wide Frequency Band; 2G/3G/4G/LTE Coverage; Low VSWR; Widely used for In-building Solutions; Low Insertion Loss.

TNC Female Straight Connector Bulkhead Mount Solder Attachment with Solder Cup Terminal

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim L29 7-16 Din Female to 7-16 Din Female Straight RF Connector Adapter

7-16 DIN adapters Features： Allow to interface 7-16 DIN connectors with 7-16 DIN, 4.3-10, N, SMA or TNC connectors; Very robust, extremely stable and waterproof; Has straight or right angle versions; Offers standard, low PIM or high performance options.

SMA Male to N Male Right Angle Coaxial Connector Cable Assembly with RG142 Cable

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

2dBi 4G LTE Wireless Omni Direction External Straight Rod Terminal Antenna with RP SMA Connector

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

25W SMA Male DC-3GHz RF Coaxial Load 50ohm Terminal Dummy Load

Features： Wide Frequency Band; 2G/3G/4G/LTE Coverage; Low VSWR; Widely used for In-building Solutions; Low Insertion Loss.

TNC Female Straight Connector Bulkhead Mount Crimp Solder Attachment for RG59 RG62 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

7-16 DIN Male to N Female Straight RF Connector Adapter

7-16 DIN adapters Features： Allow to interface 7-16 DIN connectors with 7-16 DIN, 4.3-10, N, SMA or TNC connectors; Very robust, extremely stable and waterproof; Has straight or right angle versions; Offers standard, low PIM or high performance options.

UHF PL259 Male to UHF Male RF Coaxial Cable Assembly with RG58 Coaxial Cable

UHF Cable assembly Features： Can be combined with BNC, N or UHF connector; Cable use flexible cable; Body is straight with male genders.

High Quality Waterproof 6dBi 8dBi 10dBi 746-806MHz N Female Connector Pole Mount 4G LTE Omni Directional Fiberglass Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

High Power 100W RF Coaxial Load SMA Male DC-3GHz Terminal 50ohm Dummy Load

Features： Wide Frequency Band; 2G/3G/4G/LTE Coverage; Low VSWR; Widely used for In-building Solutions; Low Insertion Loss.

TNC Female Straight Connector Crimp Solder Bulkhead Mount Attachment for RG174 RG316 RG188 LMR100 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

7-16 DIN Female to N Male Straight RF Connector Adapter

7-16 DIN adapters Features： Allow to interface 7-16 DIN connectors with 7-16 DIN, 4.3-10, N, SMA or TNC connectors; Very robust, extremely stable and waterproof; Has straight or right angle versions; Offers standard, low PIM or high performance options.

UHF Female to N Male Coaxial Connector Cable Assembly with RG58 Cable

UHF Cable assembly Features： Can be combined with BNC, N or UHF connector; Cable use flexible cable; Body is straight with male genders.

Omni Direction 7dBi 9dBi 698-960MHz 1710-2700MHz N Female Connector Pole Mount 2G 3G WLAN LTE Omni Directional Fiberglass Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

50W SMA Male RF Dummy Load 50ohm DC-3GHz Termination Load for Laboratory Antenna Testing

Features： Wide Frequency Band; 2G/3G/4G/LTE Coverage; Low VSWR; Widely used for In-building Solutions; Low Insertion Loss.

TNC Female Straight Connector Crimp Solder Bulkhead Mount Attachment for RG58 RG303 RG141 LMR195 Cable

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

Low Pim 7-16 DIN Female to N Female Straight RF Connector Adapter

7-16 DIN adapters Features： Allow to interface 7-16 DIN connectors with 7-16 DIN, 4.3-10, N, SMA or TNC connectors; Very robust, extremely stable and waterproof; Has straight or right angle versions; Offers standard, low PIM or high performance options.

UHF PL259 Male to N Female Coaxial Connector Cable Assembly with LMR300 Cable

UHF Cable assembly Features： Can be combined with BNC, N or UHF connector; Cable use flexible cable; Body is straight with male genders.

Outdoor 3-5dBi 824-960MHz 1710-2700MHz N Female Connector Pole Mount 2G 3G WLAN LTE Fiberglass Antenna

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

Company profile

All products