All products

Dry Screw Water Source Heat Pump Unit

Industrial dry type screw water source heat pump unit can meet the needs of winter heating and summer cooling through advanced water source heat pump central air conditioning system. Besides,there is no need for boiler room system for heating, no cooling tower is needed for cooling, and no pollution or emission is realized during use.

55℃ Sewage Source Heat Pump Unit

H'Stars Sewage source heat pump unit(with cold/heat recovery) is a hot water equipment developed and produced for Bathhouse, Hot spring pool, Swimming pool and other bathing places, extracting the heat from domestic sewage, saving energy and protecting the environment.Energy saving is 30%~50% compared with conventional heating method, which can greatly reduce the operation cost.

heat pump with cooling system

heat pump with cooling Introduction: The cold recovery intelligent hot water unit uses air as the low-level heat source to produce hot water, which is energy-efficient, environmentally friendly, and recycles waste cold discharged during the heating process through a cold recovery unit to improve overall energy efficiency and achieve zero-cost refrigeration. Brand: Hstars Heat capacity range: 25kw-70kw Applications: Applications: factories, hospitals, printing plants, etc.

ground source heat pump unit

ground source heat pump unit “Hstars" screw-type ground source heat pump unit uses ground energy as the main energy source, and meets the needs of winter heating and summer cooling through advanced ground source heat pump central air conditioning system. The system is approximately 50% energy efficient compared to conventional air conditioning heating systems. Brand: Hstars Cooling capacity range: 98KW ~ 7931KW; Heating range: 119KW ~ 9214KW

water source heat pump unit

water source heat pump unit “Hstars” The screw-type water source heat pump unit is mainly based on water energy, and meets the needs of winter heating and summer cooling through an advanced water source heat pump central air conditioning system. The system is approximately 50% energy efficient compared to conventional air conditioning heating systems. Brand: Hstars Cooling capacity range: 98kw ~ 7931kw; heating range: 119kw ~ 9142kw Applications: hotels, hospitals, sauna bath centers, factories and other areas.

sewage source heat pump

sewage source heat pump “Hstars”screw-type sewage source heat pump unit is mainly based on water energy, and meets the needs of winter heating and summer cooling through advanced water source heat pump central air conditioning system. The system is approximately 50% energy efficient compared to conventional air conditioning heating systems. Brand: Hstars Cooling capacity range: 98kw ~ 7931kw; heating range: 119kw ~ 9142kw Applications: hotels, hospitals, sauna bath centers, factory and other areas.

Flooded type water cooled heat pump

40STD Series flooded type water source heat pump can reach the highest COP is 6.2, the lowest chilled water temperature is 5℃ and the highest water outlet temperature is 60℃

HStars screw type water source heat pump

40STD Series flooded type water source heat pump can reach the highest COP is 6.0, the lowest chilled water temperature is 5℃ and the highest water outlet temperature is 50℃

Titanium Water Source Heat Pump Unit

Titanium Heat Exchanger Water Source Heat Pump Unit is H.Stars Group’s tailor made Non-standard Water Source Heat Pump unit.

Flooded And Screw Type Water Cooled Chiller

“H'Stars” Flooded and Screw type water cooled chiller has higher heat transfer efficiency, and the temperature difference between the water outlet temperature and the evaporation temperature is small, and the resistance along the path is small. It is suitable for units with large circulation and good cooling effect.

Flooded And Screw Type Water Cooled Industrial Chiller

40STD series Flooded type screw water-cooled industrial chiller adopts high-efficiency twin-screw compressor, self-developed and manufactured high-efficiency Flooded type evaporator, R22, R134a refrigerant, can reach 5.5. The unit has 20 standard specifications.

Scroll open type water cooled industrial chiller

Hstars Water-cooled open type intustrial chiller adopts high-efficiency compressor and electronic control components, equipped with excellent cooling condenser and evaporator

Scroll box type water cooled industrial chiller

Scroll box type water cooled industrial chiller is equipped with a water tank and a circulating water pump according to the cooling capacity, with well-known brand compressors and electronic control components. It is equipped with high-efficiency shell-and-tube condensers and evaporators.

Fan Coil Of Air Handling Unit

Fan coil unit is usually connected to AHU, which has ten standard models abd each of which is divided into standard, low static and high static. It has variable load characteristics and strong adaptability.

chiller water fan coil unit for heating and cooling

chiller water fan coil unit for heating and cooling 1. Cooling capacity scope: 3kw -----14kw Air flow volume: 470m3/h-----3070m3/h

Horizontal Ceiling Concealed Mounted Fan Coil Unit

chiller water fan coil unit for heating and cooling 1. Cooling capacity scope: 3kw -----14kw Air flow volume: 470m3/h-----3070m3/h

Low Noise Air Cooler/Cooling Fan for Cold Storage Room Food Processing Factory Use

The STE series of chillers are manufactured in European standard design and US equipment. They are equipped with high-efficiency heat exchangers and German Xerox 100-way rotor fans to ensure product quality and extend service life to ensure the safety of cold storage. The products are divided into three types: high temperature type, medium temperature type and low temperature type.

Electric Barrel Pump Unit

TB series barrel pump block, using high-efficiency fluorine pump, is equipped with large-capacity low-pressure circulating barrel which is independently developed and manufactured. This barrel pump unit is suitable for all kinds of refrigerants.

High Efficiency In-line Water Pump

Flow: 7.2CMH~437CMH ▼Pressure Head can be as high as 49m

water cooled centrifugal chiller for hotel commercial use

2 Stages water cooled Centrifugal Chiller with cooling capacity range from 500~1500RT . Centrifugal chiller is so reliable, so high-performing, so future-proof that once it’s installed, you may never have to think about it again. Low maintance cost.

R134a water cooled oil free centrifugal chiller

water cooled Centrifugal chiller The main components of centrifugal chillers are semi-closed two-pole centrifugal compressors, spray-type (falling-film) evaporators, refrigerant liquid recirculation systems, flash-type economizers and orifice plate throttling devices. Applications: Mainly used in central air conditioning systems and industrial process cooling

Flooded Type Centrifugal Chiller Water Cooled Chiller

2 Stages water cooled Centrifugal Chiller with cooling capacity range from 500RT~1500RT. Centrifugal chiller is highly reliable, high-performing, and so future-proof that once it’s installed, you may never have to think about it again. Moreover, it costs low maintain cost.

Magnetic oil free bearing centrifugal chiller

Hstars Magnetic oil free bearing centrifugal chiller Cop up to 6.7 (GB working condition) IPLV up to 11.6 (AHRI working condition)

Water-cooled magnetic suspension frequency conversion centrifugal chiller

Water-cooled magnetic suspension frequency conversion centrifugal chiller unit Cooling capacity range: 559KW-1677KW chilled water effluent temperature range: 5-20 °C

hot water chiller with cold recovery

Hot water chiller(cold recovery) is using the air as low heat source to produce the heat water. Energy saving, high efficiency and environmental protection, the waste cold discharged in the heating process is recovered through the cold recovery device, to improve the comprehensive energy efficiency and realize zero cost refrigeration

Standard Ultra-Low Temperature Air Source Hot Water Unit

The air source heat pump has five functions: refrigeration, heating and domestic hot water classification. It can realize summer cooling and winter heating. It provides domestic hot water for the whole year, so that one machine can be used, saving floor space and reducing Initial investment, saving more than 40% of the cost of use.

Industrial 90℃ Dural Source High Temperature Heat Pump

Dual source heat pump, a high efficiency and cost-effective alternative for heating, cooling . H.Stars industrialdual source heat pump unitcan produce hot water outlet temperature up to 90℃. Its first option to replace the electric heater to save energy. It’s very suitable for Automobile factory production line to replace the traditional electric heater or boiler to save electric cost. Capacity range from 300kW to 2000kW. R134a refrigerant.

Standard ultra-low temperature air source heat pump unit

H'Stars standard ultra-low temperature air source heat pump unit operates stably in the environment of -25℃ ~ 43℃, using air as a heat source, no pollutants are discharged, and 55 °C hot water is prepared to meet the demand of hot water between 35-55 °C. Heating function, suitable for direct air supply or floor radiation heating.

Scroll Air-cooled Heat Pump Unit

Scroll-type air-cooled heat pump unit adopts high-efficiency fully closed scroll compressor, self-developed and manufactured high-efficiency shell-and-tube heat exchanger and coil heat exchanger, using R22, R134a, R407c refrigerant

Air Source Intelligent Hot Water Unit

Intelligent Water Heating unit uses air as the low heat source to make hot water, which is energy-saving, efficient and environmentally friendly.

Air-cooled Screw Heat Pump Unit

Industrial and commercial screw screw heat pump is equipped with high-efficiency finned heat exchanger and widely used in building air conditioning systems, small and medium-sized offices, factory workshops, wine hotel stores, villas and other air-conditioning environments.

High Temperature Type Ultra-low Temperature Air Source Heat Pump Unit

High temperature type ultra-low temperature air source heat pump unit is made of 85 °C high temperature hot water through heat pump with rated heating capacity 88KW Input power 37.5KW Hot water temperature range 55°C-85°C

Ultra-Low Temperature Air Source Heat Pump Unit

H'Stars ultra-low temperature air source heat pump unit operates stably in the environment of -25℃ ~ 43℃, using air as a heat source, no pollutants are discharged, and 55℃ hot water is prepared to meet the demand of hot water between 35-55℃. It has heating function and is suitable for direct air supply or floor radiation heating.

Desiccant Heat Pump Drying Machine

H'Stars heat pump drying unit is developed by Stellar to produce hot air drying products. It uses air as a low-level heat source to produce hot air, which is energy-saving, efficient, and environmentally friendly compared to other methods of producing hot air.

Sewage Source Heat Pump Unit(with cold/heat recovery)

H'Stars Sewage water source heat pump unit(with cold/heat recovery) is a hot water equipment developed and produced for Bathhouse, Hot spring pool, Swimming pool and other bathing places, extracting the heat from domestic sewage, saving energy and protecting the environment.Energy saving is 30%~50% compared with conventional heating method, which can greatly reduce the operation cost.

Stainless steel air source heat pump unit

modular heat pump unit Brief introduction: The air source multifunction chiller is a multi-functional air conditioning unit, which has three working conditions of refrigeration, heating and domestic hot water production. It can be automatically switched according to the ambient temperature and hot water demand, which is energy efficient. Brand: Hstars Hot water inlet and outlet water temperature: 55 °C Applications: Application areas: hotels, hospitals, commercial and residential communities, villas, etc.

High Temperature Heat Pump Unit For Swimming Pool

H.Stars Group heat pump collect heat from air by 20℃ below the refrigerant and Compress heat into high temperature and high pressure refrigerant, and then passed through the heat transfer to the need to be heated water or other media

85℃ High Temperature Stainless Steel Hot Water Unit

modular 85℃ high temperature hot water unit Brief introduction: The air source multifunction chiller is a multi-functional air conditioning unit, which has three working conditions of refrigeration, heating and domestic hot water production. It can be automatically switched according to the ambient temperature and hot water demand, which is energy efficient. Brand: Hstars Hot water inlet and outlet water temperature: 85 °C Applications: Application areas: hotels, hospitals, commercial and residential communities, villas, etc.

Screw Compressor Air Source Heat Pump for Heating

Screw Compressor Air Source Heat Pump is used for swimming pool heating, and also for cooling & sanitary hot water in office. Heating mode, cooling mode and heat recovery mode are all available. The power source is hot water or steam.

Shell And Tube Heat Exchanger

Shell and tube evaporators are specially designed for systems such as air conditioning systems, cooling systems, and heat pump machining. Its convenient maintenance, high heat transfer performance, is widely used in chemical processes, power plants, refrigeration machinery and other occasions.

Showing 5 to 7 of 7 (5 Pages)

click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.