Hefei Mycoil Technology Co.,Ltd.-sfyh.com

High Frequency Mn-Zn Planar Cores EI Series Ferrite Core

EI power ferrite core has compact structure,small size,high frequency,wide operating voltage range,the air gap in the top of the coil coupling tight,low loss.

Low Transmission Loss EP Series Ferrite Cores

EP ferrite core has good magnetic shielding, small distributed capacitance, low transmission loss. Bobbin equipped multiple connectors, easy to design multiple output transformers.

High Frequency Ferrite Core PCB, EPC10 Power Ferrite Core

EPC power ferrite core has small thermal resistance,low attenuation,high power,wide operating frequency,light weight,reasonable structure,easy surface mount,shielding effect is good.

ET and FT Series High Frequency Filter Ferrite Cores for Computers, Video Phone

ET/FT series ferrite core has small stray capacitance,low ripple coefficient,less leakage flux,high inductance.Mainly for electronic transformers,computers,color TV,monitors.

High Frequency Ferrite Core ETD and EC Series Ferrite Core

ETD and EC ferrite core coupling position is good,center column is circular,easy to winding and increase winding areas,used inlarge power small leakage inductance transformer.

Electronic and Inductors Core, LP Series Mn-Zn Ferrite Core

LP Series Ferrite Cores with Bobbins and Clamps,accept different series and customized designs. High frequency and low-loss ferrite cores.Compatibility cross series brands ferrite cores.

Electronic Transformer Cores PEE or PEI Power Ferrite Core

PEE and PEI series ferrite core has high frequencylow power loss and high value.Widely used in high frequency switching power transformers,filter transformers,inductors.

High Frequency Transformer Cores PM Series Ferrite Core

PM series ferrite core has wide frequency range, it's low insert loss ferrite cores. Mainly used for electronic transformers and choke inductors.

POT Series Soft Mn-Zn Magnetic Ferrite Core for Electronic Transformers and Chokes

POT Series Ferrite Core has small size,high inductance,easy winding,high inductance per unit space,magnetic shielding and cooling effect of a balanced.

PQ4035 Ferrite Cores, High Frequency Transformer and Big Power Range Cores

Large power range(50W-1000W)PQ ferrite core,can effectively reduce the installation volume,with multiple pins,easy wiring around.Low assembly cost,easy to meet safety requirements.

High Frequency Switching Supply Transformer Cores, RM8 Ferrite Core

RM ferrite core has good magnetic shielding effect, strong anti-interference ability, multi-pin with bobbin, multi-output transformer can be designed for high density installation.

UF Electronic Transformer Ferrite Core, M10P/M7P/M5P/MP4 Material Core

UF cores and UI cores are similar to that of the "C" core, can take full advantage of grain orientation, UF ferrite cores has excellent heat dissipation, and enough space are available for lead wires.

High Stability Ferrite Core UI Series Ferrite Core for Inductor and Transformer

UI ferrite core mainly for switching power supply, transformers, choke coils. UI Ferrite Core has wide distributing permeability. UI soft ferrite core shapes are available in lamination materials.

High Frequency Low-loss and Big UU Series Ferrite Core

UU series ferrite core has small impedance deviation,big output current,high inductance.Used in filter common mode transformer,choke coils,electronic devices.

Solid and Hollow Magnetic Ferrite Core YO Series Ferrite Core

High frequency welding rod core working environment determines it must have a certain corrosion resistance,high temperature resistance,some places need magnetic induction intensity is relatively strong.

SQ Soft Magnetic Ferrite Core for Filter Inductor

SQ series ferrite core has high permeability, maminly used for power inductor, high frequency permeability inductor, common mode choke coils and EMI filters. We can provide samples for test. Small order is acceptable.

EQ Sendust Core For Power Factor Correction Circuits

Sendust core for EMI filter. EQ series sendust corefor transformer has large energy storage capacity and excellent DC bias characteristics. Material properties: MS for Fe-Si-Al, MSF for Fe-Si. We can provide samples for testing first.

R4*10 Soft Ferrite Rod Magnetic Core

Soft Type and ferrite rod bar core. We make final filter power inductor, mainly used in DC-DC converter,choke coils. Tele-Communication. LED lighting and car components's driver. Audio and video antenna filters.

High Frequency Ferrite R4*20 Core for Inductor

Ferrite rod choke R4*20. High permeability and small size soft ferrite core. Rod core inductor mainly used in LED lighting and car components's driver. DC-DC converter,choke coils. Tele-Communication.Audio and video antenna filters.

High Current Three Phase Three Line Output Filter For Inverter

3 phase output EMC/EMI filter, it has excellent interference suppression for Dv/Dt. (1)Test Voltage ( 1min ): Line to Ground: 1450VAC. Line to Line: 2700VAC. (2)Insulation Resistance: Line to Ground: ≥3000Ω. Line to Line: ≥6000Ω. (3)Various connection optional: bolt and busbar terminals.

Low Pass Filter Three Phase Three Line Input EMI Filter for Inverter

AC three phase input EMI filter for inverter, with high interference industrial environment. (1)Test Voltage ( 1min ): Line to Ground: 1450VAC. Line to Line: 2700VAC. (2)Leakage current(max): Line to Ground: @250VAC/50Hz (3)Various connection optional: bolt and busbar terminals.

High Performance Single Phase EMI Filter for Speed Motor Device

Single phase EMI filter for converter, has high performance with differential mode choke. (1)Test Voltage ( 1min ): Line to Ground: 2000AC. Line to Line:1450VAC. (2)Leakage current(max): Line to Ground: @250VAC/50Hz (3)Various connection optional: bolt and busbar terminals.

Home Appliance Suppression Filter EMI Power Line Filters

Customized household applicance EMI filters. It has excellent interference suppression for CM and DM. Test voltage(1min): Line to ground:2000VAC. Line to Line:1450VDC. Mainly for Washing Machines, Coffee Machines, Dishwashers, Vacuum Cleaners, Blenders.

IEC Line Filters for Single Phase Power Supplies

IEC noise EMI filters manufacture. Single phase EMI filter for converter, with compact unit, light weight, low price, easy to install. Optional medical versions (B type) comply with the requirements of IEC/EN 60601-1. Test Voltage ( 1min ): Line to Ground: 2000AC. Line to Line:1450VAC.

AIE7 Power Entry Module IEC Filter with Switch

IEC EMI filters with switch, it has compact unit, light weight, low price. Rear/front or snap-in mounting.(S and S1 type). Optional medical versions (B type) comply with the requirements of IEC/EN 60601-1. Test Voltage ( 1min ): Line to Ground: 2000AC. Line to Line:1450VAC.

IEC EMI Power Filter with Switch and Fuse Holder

IEC EMI filters rated currents up to 10A. Rear/front or snap-in mounting. Custom-specific versions are available on request. Optional medical versions (B type) comply with the requirements of IEC/EN 60601-1. Test Voltage ( 1min ): Line to Ground: 2000AC. Line to Line:1450VAC.

IEC EMI Filter Power Entry Module with Fuse Holder

Power entry module EMI filter with fuses. Rear/front or snap-in mounting. Custom-specific versions are available on request. Optional medical versions (B type) comply with the requirements of IEC/EN 60601-1. Test Voltage ( 1min ): Line to Ground: 2000AC. Line to Line:1450VAC.

Military Single Phase DC EMI Filters

Military electronic installation filters. Excellent performance at high and low frequency. Type: DC. Rated current from 1A to 10A. Test Voltage ( 1min ): Line to Ground: 700VAC. Line to Line:400VDC.

440VAC Military Single Phase Filters Rated Current 50A

Military DC filters design. Excellent performance at high and low frequency. Type: DC. Rated current from 10A to 50A. Test Voltage ( 1min ): Line to Ground: 2250VAC. Line to Line: 1500VDC.

250VAC Military Filters Single Phase Military RF Filters

Customized military EMC filters. High quality components, high performance/cost. Type: single phase. Rated current from 1A to 10A. Test Voltage ( 1min ): Line to Ground: 1500VAC. Line to Line: 1500VDC.

120VAC 6A PCB Through Hole Mounting EMI Filters

Custom PCB mounting EMI filters. Rated currents from 0.5 to 10A. Optional metal or plastic housing. Test voltage(1min): Line to ground : 2000VAC; Line to Line : 1450VDC. Optional DC version(D type). Mainly for single-phase power supplies, switch-mode power supplies.

10A 120V Single Phase Single Stage EMI Filters

Single phase EMI noise filters. Rated currents from 1A to 10A. Low leakage current and high quality components ensure the safety and reliability of filters. Various terminal options: faston/screw/wire.

Single Stage EMI Filter Single Phase AC Noise Filter

Single phase single stage noise filters. Rated currents from 6A to 100A. Low leakage current and high quality components ensure the safety and reliability of filters. Various terminal options: faston/screw/wire.

Single Phase Double Stages EMI Power Line Noise Filter

Single phase two stage noise filters. MCT2S7 two-stage filters are designed for noisy applications requiring good differential and common-mode attenuation. Rated currents from 1A to 35A. Easy and fast chassis mounting. Various terminal options: faston/screw/wire.

Single Phase High Performance EMI Filter for Inverter

Single phase power filters. High performance with differential mode choke. Good low frequency attenuation. Good performance for inverter and kinds of speed motor apparatus, which meet the RFI electromagnetic compatibility of Euro standards. Welcome for customized products.

250/440VAC General Purpose Three Phase Three Line EMI Filters

Three phase three line EMI filter 10A 200A. High quality components ensure the safety and reliability of filter. Chassis mounting with various connection: fast on/screw/wire terminal. Test voltage(1min): Line to ground:2700VAC. Line to Line:1450VDC. Excellent interference suppression performance for CM and DM.

6A-10A Three Phase Four Line Drive EMI Filters

250/440VAC EMI power line three phase filter. High quality components ensure the safety and reliability of filter. Chassis mounting with various connection: fast on/screw/wire terminal. Test voltage(1min): Line to ground:2700VAC. Line to Line:1450VDC. Line to Neutral:1450VDC. Excellent interference suppression performance for CM and DM.

AC Three Phase Four Line EMI RFI Noise Filters

30A/50A/300A 440VAC three phase four line filter. High quality components ensure the safety and reliability of filter. Chassis mounting with various connection: fast on/screw/wire terminal. Test voltage(1min): Line to ground:2700VAC. Line to Line:1450VDC. Line to Neutral:1450VDC. Excellent interference suppression performance for CM and DM.

DC EMI Filters For Switching Power Supply

DC EMI filter is designed for DC power line. IT has excellent differential,common-mode attenuation. High performance,easy to install. We accept custom design EMI filters.

80A 100A Specialized For Household Appliance DC EMI Noise Filter

DC EMI filter mainly used in electric power supply, data system, testing equipment, digital system and other consumer electronics. Always designed for DC power line.

Company profile

All products