Company profile

Wuhan Xintiandi is a leading electrical cable manufacturer and exporter, specialized in manufacturing Hante brand electrical wires, power cables and communication cables over 23 years, reliable after-sales service and technical support. Accept OEM/ODM.

All products

H05V-U H07V-U BV Solid Single Core Non-Sheath Electrical Wires

H05V-U H07V-U BV Solid Single Core Non-Sheath Electrical Wires, the product structure includes the solid copper wire and PVC insulation, it is used to to connect indoor switch sockets, lighting, household appliances, small power tools and instruments.

H05V-R H07V-R BV Strand Single Core Non-Sheath Electrical Wires

H05V-R H07V-R BV strand wire includes strand copper/aluminum wire and PVC insulation, and it is softer than the BV solid wire. It It is used to used to to connect indoor switch sockets, lighting, household appliances, small power tools and instruments.

6181Y Single Core PVC Insulated NYM BVV Electrical Cable

6181Y Single core double PVC insulated BVV NYM cable, copper wire, PVC insulation, PVC sheath. It is used to general purpose, for installation in raceway and shall be protected water into raceway, but do not install in duct in ground or direct burial in ground.

Flat Twin and Earth BVVB Electrical cable

Flat twin and earth BVVB cable, copper wire, PVC insulation, PVC sheath, earth wire is available, meet to GB/T 5023, IEC 60227. It is used in building wiring, installation on insulator or cable conduit, and widely used in household appliances. But cables cannot be installed in conduit or buried underground.

AS/NZS 5000.2 Flat TPS BVVB Electrical Cable

AS/NZS 5000.2 flat TPS BVVB electrical wire and cable, PVC Flat TPS 2C & 2C + earth, copper wire, V-90 PVC insulation, 3V-90 PVC sheath. It is used in building wiring, installation on insulator or cable conduit, and widely used in household appliances. But cables cannot be installed in conduit or buried underground.

BS6004 6242Y Flat Twin and Earth BVVB Electrical Cable

BS6004 6242Y Flat Twin and Earth BVVB Electrical Wire and Cable, copper wire, PVC insulation, bare earth (if available), PVC sheath. It is used for small power and lighting applications. Individual cores are PVC insulated with two and three core options available, both include an additional un-insulated circuit protective conductor.

H05V-K H07V-K 2491X Single Core PVC Insulated flexible RV Electric Cable

H05V-K H07V-K 2491X single core PVC insulated non-sheath flexible RV Electrical wire and Cable, strand flexible copper wire, PVC insulation, non-sheath. H05V-K H07V-K RV cable, is softer than BV and BVR cables.

Twisted Flexible RVS PVC Insulated Electrical Wires

Twisted Flexible RVS PVC Insulated Electrical Wires, strand flexible copper wire, PVC insulation. It is a wire made of copper conductor and is commonly used for temporary use to fulfill domestic needs. Features: With perfect thickness, can easily use in innumerable applications, perfectly twisted.

Flat-twin Flexible RVB PVC Insulated Electrical Wires

Flat-twin Flexible RVB PVC Insulated Electrical Wires, strand flexible copper wire, PVC insulation. It is used for the fire alarm system, automatic fire detector circuit, household appliances, small electric tools, instruments and power lighting line. For connecting amplifiers and audio equipment, radio transmission systems amplified by the amplifier of the audio signal processing.

Flat Flexible RVH Electrical Wires

Flat Flexible RVH Electrical Wires, strand flexible copper wire and tinned copper wire, soft transparent PVC insulation. It is used to stereo speaker connections, For the transmission of low-frequency audio signals, Broadcasting system equipment, Conference Room Project.

H03VV-F H05VV-F Flexible RVV Electrical Wires and Cables

H03VV-F H05VV-F 318-Y flexible RVV cable, strand flexible copper wire, soft PVC insulation, PVC sheath. Flexible wiring, for switch control, instrumentation panels and for internal connection.

Multi-cores PVC Insulated PVC Sheathed BVV Electrical Wires

Multi-cores BVV NYM cable, copper wire, PVC insulation, PVC sheath, inner sheath if available as per the customer request. It is used to general purpose, for installation in raceway and shall be protected water into raceway, but do not install in duct in ground or direct burial in ground.

Shielded Flexible RVVP PVC Insulated Electrical Cables

H05VVC4V5-F shielded Flexible PVC Insulated RVVP Electrical Cables, strand flexible copper wire, PVC insulation, copper wire or tinner copper wire braid shielded, aluminum foil screened, PVC sheath.

H07V-R Single Core Strand Copper PVC Insulated Non-Sheath BVR Electric Cables

H07V-R BVR Cable, single core, strand copper wire, PVC insulation, non-sheath, meet to JB/T 8734.3-2016. It is softer than the BV cable. It is used to to connect indoor switch sockets, lighting, household appliances, small power tools and instruments.

NYY PVC Insulated PVC Sheathed VV Power Cables 0.6/1kV

NYY VV power cables, 0.6/1kV, CU/PVC/PVC, copper wire, PVC insulation, PVC sheath, meet to GB/T 12706, IEC 60502. The NYY VV power cable is suitable for fixed installations, preferably in cable ducts, indoors, outdoors, in water or underground if no mechanical damage is to be expected.

VV22 PVC Insulated STA Armoured PVC Sheathed Power Cables

VV22 PVC Insulated STA Armoured PVC Sheathed Power Cables, 0.6/1kV, CU/PVC/STA/PVC, copper wire, PVC insulation, PVC innel sheath (is optioned), steel tape armoured, PVC sheath, meet to GB/T 12706, IEC 60502. The VV22 power cable is suitable for fixed installations, preferably in cable ducts, indoors, outdoors, in water or underground if no mechanical damage is to be expected.

VV32 PVC Insulated SWA Armoured PVC Sheathed Power Cables

VV32 PVC Insulated SWA Armored PVC Sheathed Power Cables, 0.6/1kV, CU/PVC/PVC/SWA/PVC, copper wire, PVC insulation, PVC inner sheath, steel wire armored, PVC sheath, meet to GB/T 12706, IEC 60502, BS 6346. Generally speaking, steel wire armored cables have the characteristics of steel tape armored cables, and it can be laid vertically, but steel tape armored cables can only be laid horizontally.

XLPE Insulated PVC Sheathed YJV Power Cables

XLPE Insulated PVC Sheathed YJV Power Cables, 0.6/1kV, CU/XLPE/PVC/PVC, copper conductor, XLPE insulation, PVC inner sheath, PVC out sheath, meet to GB/T 12706, IEC 60502, BS 7889.

XLPE Insulated STA Armored PVC Sheathed YJV22 Power Cables

XLPE Insulated STA Armored PVC Sheathed YJV22 Power Cables, 0.6/1kV, CU/XLPE/PVC/STA/PVC, copper conductor, XLPE insulation, PVC inner sheath, steel tape armored, PVC out sheath, meet to GB/T 12706, IEC 60502, BS 7870.

XLPE Insulated SWA Armoured PVC Sheathed YJV32 Power Cables

XLPE Insulated SWA Armoured PVC Sheathed YJV32 Power Cables, 0.6/1kV, CU/XLPE/PVC/SWA/PVC, copper conductor, XLPE insulation, PVC inner sheath, steel wire armored, PVC out sheath, meet to GB/T 12706, IEC 60502, BS 5467.

RV-K xlpe insulated pvc sheath YJV power cable

Hante brand RV-K cable, plain annealed copper wire conductor, xlpe insulation, PVC sheath, power cable, GB/T 12706, IEC 60502, BS EN 60502.

Single core Medium Voltage Power Cables

Single core Medium Voltage Power Cables, 3.6/6kV~26/35kV, CU/XLPE/PVC/PVC, CU/XLPE/PVC/STA/PVC, CU/XLPE/PVC/SWA/PVC. Compacted stranded copper conductor, Colored tape under the screen, XLPE insulation, Semi-conducting layer with a copper tape screen covering each core, PVC inner sheath, steel tape or steel wire armored (is optioned), PVC out sheath. The cable can be complied with GB/T 12706, IEC 60502, BS 6622, VDE 0276 and other standard.

3 cores Medium Voltage Power Cables

3 cores Medium Voltage Power Cables, 3.6/6kV~26/35kV, CU/XLPE/PVC/PVC, CU/XLPE/PVC/STA/PVC, CU/XLPE/PVC/SWA/PVC. Compacted stranded copper conductor, Colored tape under the screen, XLPE insulation, Semi-conducting layer with a copper tape screen covering each core, PVC inner sheath, steel tape or steel wire armored (is optioned), PVC out sheath. The cable can be complied with GB/T 12706, IEC 60502, BS 6622, BS 7835, VDE 0276 and other standard.

KVV Plastic Insulated Control Cables

KVV Plastic Insulated KVV Control Cables, copper conductor, copper wire, tinner copper, copper tape, aluminum foil shielded/screen, steel tape or steel wire armored, PVC or PE or LSZH sheath.

CY PVC insulated TCWB shielded YSLCY KVVP control cable

CY PVC insulated TCWB shielded YSLCY KVVP control cable, plain annealed copper wire conductor, PVC insulation, aluminum foil screen, tinned copper wire braid, PVC sheath, 450/750V.

SY PVC insulated steel wire armoured YSLYSY KVV32 control cable

SY PVC insulated steel wire shielded YSLYSY KVVP control cable, plain annealed copper wire conductor, PVC insulation, PVC inner sheath, galvanized steel wire armoured, PVC sheath, 300/500V.

YY PVC insulated YSLY unshield KVV control cable

YY PVC insulated YSLY unshield KVV control cable, plain annealed copper wire conductor, PVC insulation, PVC inner sheath, unshielded or un-screen, PVC sheath, 300/500V or 450/750V.

BTTZ BTTQ mineral insulated Power Cables

BTTZ & BTTQ mineral insulated cable is composed of copper conductor, magnesium oxide insulation, and seamless copper tube protective sheath, PVC or PE or LSZH out sheath is optioned. It has strong fire resistance characteristics, and can be widely used in various fields. 500V or 750V, meet to GB/T 13033, IEC 60702, BS 6387, BS 5266.

YTTW YTTWY Mineral Insulated Fire Resistant Cables

YTTW, YTTWY mineral insulated cable, 0.6/1kV, plain annealed copper wire, Inorganic mineral insulated compound, rolled copper tube sheath, meet to JG/T 313-2014, GB/T 34926-2017, BS 6387.

NG-A BTLY Mineral Insulated Fire Resistant Cables

NG-A BTLY Mineral Insulated Fire Resistant Cables, 0.6/1kV, plain annealed strand copper wire, Inorganic mineral insulated compound, rolled copper tube sheath, meet to BS 6387, IEC 60702, JG/T 313-2014, GB/T 34926-2017.

BBTRZ Mineral Insulated Fire Resistant Cables

BBTRZ Mineral Insulated Fire Resistant Cables, 0.6/1kV, plain annealed strand copper wire, Inorganic mineral insulated compound (with MICA tape), XLPE isolated layer, mineral fire protection layer, LSZH compound sheath, meet to BS 6387, IEC 60702, JG/T 313-2014, GB/T 34926-2017.

1kV single core JKLV aluminum conductor PVC insulated Aerial Cables

1kV single core JKLV aluminum conductor PVC Insulated Aerial Cable, it applies to electrical overhead power transmission and distribution lines with AC rated voltage U0/U up to and including 1kV.

10kV Aluminum Conductor XLPE Insulated Aerial Cables

10kV Aluminum Conductor XLPE Insulated Aerial Cables, it is composed of compacted copper and aluminum (aluminum alloy) conductor, inner shielding layer, fireproof insulating material and outer shielding layer.

All Aluminum Conductor AAC cable

All Aluminum Conductor AAC cable, all bare annealed aluminum wire conductor, have not insulation and sheath, meet to ASTM B-230, ASTM B-231, GB/T 1179-2008.

All Aluminum Alloy Conductor AAAC cable

All Aluminum Alloy Conductor AAAC cable, aluminium alloy conductor, has not insulation and sheath, meet to ASTM B-399, ASTM B-231, IEC 61089, GB/T 1179, BS EN 50183.

Aluminum Conductor Steel Reinforced ACSR cable

Aluminum Conductor Steel Reinforced ACSR cable, conductor material is hard drawn aluminium: BS EN 60889 AL1 and Zinc coated steel wire as per BS EN 50189 with the class and grade in accordance with ST1A, ST5E and ST6C.

Aerial bundle cable ABC cable

Aerial bundled cables (also aerial bundled conductors or simply ABC) are overhead power lines using several insulated phase conductors bundled tightly together, usually with a bare neutral conductor. This contrasts with the traditional practice of using un-insulated conductors separated by air gaps. This variation of overhead power lines utilizes the same principles as bundled conductors, except that they are closer together to the point of touching but each conductor is surrounded by an insulating layer (except for the neutral line).

Cat 5e UTP Unshielded LAN Cable

Cat 5e UTP Unshielded LAN Cable, bare copper or CCA conductor, HDPE insulated, unshield, PVC or LSZH sheath, meet to ISO/IEC 11801, ANSI/TIA/EIA 568B or YD/T 1019.

Cat 5e FTP shielded PVC sheath LAN Cable

Cat 5e FTP shielded LAN Cable, bare copper or CCA conductor, HDPE insulated, aluminum foil shielded, PVC sheath, meet to ISO/IEC 11801, ANSI/TIA/EIA 568B or YD/T 1019.

Cat 6 UTP Unshielded PVC sheath LAN Cable

Cat 6 UTP Unshielded LAN Cable, bare copper conductor, HDPE insulated, unshield, PVC sheath, meet to ISO/IEC 11801, ANSI/TIA/EIA 568B or YD/T 1019.

Showing 1 to 2 of 2 (1 Pages)

click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.