All products

PCB Spacer FR-4 Spacer Block Space Bar On 1.5mm FR4 with Drill Holes

This is a type of no copper PCB built on FR-4 Tg135 substrate for the application of spacer.

Single Sided Flexible Printed Circuit (FPC) Single Layer PCB

Flexible Printed Circuit Board (FPC) is referred to as "soft board". In the industry, FPC is a printed circuit board made of flexible insulating substrate (mainly polyimide or polyester film), which has many advantages that rigid printed circuit boards do not have.

Double Sided Plated-Through Flexible Circuits 2-Layer PCB Dual Layer FPC

It’s a 2 layer flex board at 0.15mm thick. It contains yellow coverlay (solder mask) and without silkscreen on entire board, and immersion gold is applied on pads.

Flexible Printed Circuits (FPC) with FR-4 Stiffener PCB

This is a type of flexible printed circuit for the application of Surveillance System. It’s a single layer FPC at 0.15mm thick.

Flexible PCB with Polyimide Stiffener Flexible Printed Circuit (FPC) with PI Stiffener

This is a type of single layer flexible printed circuit for the application of Wireless Dongle, 0.2mm thick.

Flexible PCB With Stainless Steel Stiffener Flex with Stainless Steel Shim

It’s fabricated per IPC 6012 Class 2 using supplied Gerber data. Stainless steel as stiffener is applied on the two ends.

Flexible Printed Circuit (FPC) Flexible PCB On Polyimide With Black Solder Mask

This is a type of flexible printed circuit for the application of PLC Programing.

Flexible Printed Circuit FPC on PET with White Solder Mask

This is a type of dual layer flexible circuit built on PET substrate, 1oz copper weight on each layer.

Single Sided Flexible PCBs FPC Polyimide Substrate 3M Tape Tesa Tape

This type of flexible printed circuit is for the application of calculator keypad. It’s a single layer FPC at 0.15mm thick.

Flexible Printed Circuit (FPC) Flexible PCB With Partial Green Solder Mask

This type of flexible printed circuit is on polyimide material for the application of gigabyte switch.

Flexible Printed Circuit (FPC) Flexible PCB On Transparent PET Substrate

This type of flexible printed circuit is on polyimide material for the application of gigabyte switch. 

Double Layer Assembled Flexible Printed Circuit FPC Assembly

This is a type of flexible printed circuits built on polyimide substrate with connectors assembled for the application of USB wireless.

Flexible Printed Circuit FPC on Polyimide with 90ohm Impedance Controlled

This is a type of flexible PCB built on polyimide 76 micron substrate with 90 ohm impedance controlled on 0.15mm/0.3mm track and gap for the application of USB Connector.

Large Flexible Circuits Fine Line FPC With Coil Design

This type of flexible PCB is build on polyimide with fine line coils for the application of GPS tracking systems.

Flexible Printed Circuit FPC on Polyimide with 2 Meters Long

This FPC is a single sided strips with 2-meter long, 1oz copper with tesa tape on back side,

Multilayer Flexible Printed Circuit (FPC) Multi-layer Flexible PCB Board

This type of flexible circuit is 4-layer structure built on polyimide (PI) for the application of wireless router, 1oz copper each layer.

Heavy Copper Flexible PCB Built On Polyimide with 2 oz Copper

This type of flexible circuit is for the application of AC power systems.

Rigid-Flex PCB Built on FR-4 Poyimide Immersion Gold 90ohm Impedance Control

This is a type of rigid-flex PCB for the application of car tracker GPS. It’s a 6-layer build-up with 1.4mm thick, half ounces on inner layers and 1 ounce on out layers.

Rogers 60mil 1.524mm RO4350B Double Sided RF Patch PCB

RO4350B hydrocarbon ceramic laminates are designed to offer superior high frequency performance and low cost circuit fabrication.

Rogers RT/Duroid 5870 10mil 0.254mm High Frequency PCB

Rogers RT/duroid 5870 high frequency material is glass microfiber reinforced PTFE composites which is designed for exacting stripline and microstrip circuit applications.

Rogers RO4730G3 High Frequency PCB 2 Layer 20mil 0.508mm DK3.0 PCB

Rogers RO4730G3 antenna grade laminates are reliable, low-cost alternative to the conventional PTFE-based laminates. It has the mechanical and electrical properties that antenna designers need.

Arlon AD450 High Frequency PCB with 70mil Coating Immersion Gold

AD450 is compatible with processing used for standard PTFE based printed circuit board substrates. In addition, it's low Z-axis thermal expansion will improve plated through holes reliability, compare to typical PTFE based laminates.

Rogers AD450 High Frequency PCB 10mil Substrate With ENIG

The electrical properties of AD450 suggest it can readily replace FR-4 in applications where higher frequencies and expectations for increased fidelity with broadband signal are beyond the performance offered by FR-4.

TRF-45 RF 1.0mm Double Sided High Thermal Conductivity Low Loss PCB

This type of double sided high frequency PCB is built on 40mil TRF-45 low-loss ceramic-filled material with 1oz copper on both top and bottom side.

RF-45 Low Loss RF PCB Stable DK High Frequency High Performance Circuit Board

It’s a kind of low loss laminate alternative to FR-4, dielectric constant (DK) flat over temperature and DF is stable over frequency.

Rogers HF PCB Built on RT/Duroid 6002 30mil DK2.94 Immersion Goldequency PCB

Rogers RO3006 was designed to offer exceptional electrical and mechanical stability at competitive prices.

Fast PCB Quick Turn Prototype 4-layer Circuit Board FR-4 With 2oz and Immersion Gold

This is a type of fast lead time required multilayer PCB built on FR-4 substrate with Tg 150°C for the application of Power Supply Switch.

Double Sided Aluminum PCB Dual Layer Circuit Board 2-Layer MCPCB

This is a type of double sided aluminum based PCB for the application of switch regulator.

90 Ohm Impedance Controlled | Single End Differential Impedance Printed PCB Board

This is a type of 10-layer PCB circuit board built on FR-4 substrate with Tg 180°C for the application of signal generator.

High Tg PCB Made on S1000-2M and 90 Ohm Impedance Control

This is a type of high Tg PCB with differential impedance on layer 3 at 6mil/7mil, 6mil/10mil.

TU-883 Multi-layer HDI Low Loss High Temperature PCB With 90 Ohm Impedance Controlled

This is a type of low loss high performance multi-layer PCB built on TUC’s TU-883 core with 20 copper layers (20-layer PCB).

Showing 5 to 6 of 6 (5 Pages)

click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.