Shenzhen Bicheng Electronics Technology Co., Ltd.

High Tg PCB on S1000-2M Core and S1000-2MB Prepreg with Immersion Gold

S1000-2M is a type of High Tg printed circuit board material manufactured by Shengyi with characteristics of high performance and low CTE.

High Frequency PCB On DK2.65 PTFE Double Sided With OSP and Green Mask

Polytetrafluoroethylene (Short for PTFE), commonly known as "plastic king ", is a polymer compound made of tetrafluoroethylene by polymerization. It has excellent chemical stability, corrosion resistance, sealing, high lubrication and non-viscosity, electrical insulation and good aging resistance.

Rogers High Frequency PCB RT/Duroid 6010 DK 10.2 50mil Immersion Gold

RT/duroid 6010LM microwave laminates feature ease of fabrication and stability in use. This property results in the possibility of mass production and reducing the cost of goods.

Rogers TMM4 PCB Immersion Gold TMM3 TMM6 TMM10 TMM10i TMM13i

Rogers TMM4 thermoset microwave material is ceramic, hydrocarbon, thermoset polymer composite designed for high plated-through-hole reliability stripline and microstrip applications.

Taconic High Frequency Made on TLY-5 7.5mil 0.191mm DK2.2 PCB

Taconic TLY laminates are a type of low loss laminates. They are manufactured with very light weight woven fiberglass and are more dimensionally stable than chopped fiber reinforced PTFE composites.

Rogers RO3203 High Frequency 2-Layer 10mil Circuit Board Microwave PCB

RO3203 laminates combine the surface smoothness of a non-woven PTFE laminate, for finer line etching tolerances, with the rigidity of a woven-glass PTFE laminate. These materials can be fabricated into printed circuit boards using

RF-45 High Frequency PCB with Blue Solder Mask Coating Immersion Silver

This type of immersion silver RF PCB is made on one of Taconic’s ORCER family material: RF-45.

Rogers 15mil TMM10 High Frequency PCB With Green Solder Mask

Rogers’ TMM10 thermoset microwave materials are ceramic, hydrocarbon, thermoset polymer composites designed for high plated-thru-hole reliability stripline and microstrip applications.

Rogers RO3006 Microwave 2-Layer 25mil 0.635mm DK6.15 DF 0.002 High Frequency PCB

Rogers RO3006 was designed to offer exceptional electrical and mechanical stability at competitive prices.

PTFE PCB Board 1.5mm PTFE Plate with 3oz Copper and Immersion Silver Pads ld

Polytetrafluoroethylene (Short for PTFE), commonly known as "plastic king ", is a polymer compound made of tetrafluoroethylene by polymerization.

Rogers RT/Duroid 5870 20mil 0.508mm High Frequency PCB Double Sided RF PCB

Rogers RT/duroid 5870 high frequency material is glass microfiber reinforced PTFE composites which is designed for exacting stripline and microstrip circuit applications.

RT/Duroid 5880 10mil Double Sided Rogers High Frequency PCB Sided RF PCB

Rogers RT/duroid 5880 high frequency material is glass microfiber reinforced PTFE composites which is designed for exacting stripline and microstrip circuit applications.

Taconic High Frequency PCB Built on RF-35TC 10mil 0.254mm

RF-35TC is a type of high frequency material from Taconic company. It offers a "best in class" low dissipation factor with high thermal conductivity.

TLX PCB 2 layer Low DK 2.45 Taconic High Frequency PCB 62mil Immersion Silver

TLX offers reliability in a wide range of RF applications. This material is versatile due to its 2.45 - 2.65 DK range and available thicknesses and copper cladding. It is suitable for low layer count microwave designs.

Taconic RF Made on TLF-35 60mil 1.524mm Immersion Gold PCB

TLF-35A is another type of low cost RF material. It's the best choice for low cost, high volume commercial microwave and radio frequency applications.

Taconic CER-10 RF Printed Circuit Board 2-Layer CER-10 62mil PCB with Immersion Gold

CER-10 is an organic-ceramic DK-10 laminate in the ORCER family of Taconic products. It is based on a woven glass reinforcement. CER-10 exhibits exceptional interlaminar bond strength and solder resistance.

Rogers RO4360 RF PCB 12mil Double Sided Immersion Gold

RO4360G2 laminates of Rogers Corporation are 6.15 Dk, low loss, glass-reinforced, hydrocarbon ceramic-filled thermoset materials that provide the ideal balance of performance and processing ease.

RF-60A 25mil (0.635mm) Taconic High Frequency PCB With Immersion Ni/Au

RF-60A is an organic-ceramic laminate in the ORganic CERamic(ORCER) family of Taconic products.

Taconic High Frequency PCB Buitl on TLX-8 62mil 1.575mm with OSP

TLX is PTFE based fiberglass laminate, it is ideal for use in radar systems, mobile communications, microwave test equipment, microwave transmission devices and RF components.

Taconic High Frequency PCB Built on TLX-9 62mil 1.575mm With Immersion Silver

TLX offers reliability in a wide range of RF applications. This material is versatile due to its 2.45 - 2.65 DK range and available thicknesses and copper cladding. It is suitable for low layer count microwave designs

Hybrid 4-layer PCB 20 mil RO4350B + FR4 Blind Via

Base material: RO4350B 0.508 mm + FR4 0.6mm + PP 0.306mm

Hybrid RF 5-layer Circuit Boards 10mil RO4350B and FR-4

It’s for the application of 2.4 Ghz Antenna. It's 1.0 mm thick with through holes. Green solder mask covers both sides and immersion gold on pads.

Hybrid High Frequency 6-layer PCB 10mil RO4350B and FR-4 Blind Via

This type is more complex. The 10mil RO4350B core is the same. The main difference is that it contains 3 types blind via.

High Density Interconnect (HDI) PCB Circuit Board 14-Layer FR-4 Tg170℃ With Immersion Gold

This is a type of 14-layer HDI printed circuit board built on FR-4 Tg170 substrate for the application of codec equipment.

High-Tg PCB Built on TU-768 With 1.2mm Thick Coating Immersion Gold Multilayer TU-768 PCB

This is a type of High-Tg 4-layer PCB Built on TU-768 material. Each layer is plated with 1oz copper.

Low Loss PCB on TU-883 Substrate and TU-883P Prepreg Multi-layer PCB

ThunderClad 2 ( TU-883 ) is a very low loss category material based on a high performance resin.

Rogers 4003 60mil 1.524mm RO4003C High Frequency RF PCB

RO4003C PCBs are hydrocarbon ceramic filled laminates, not PTFE which are designed to offer superior high frequency performance.

Rogers RO3003 High Frequency PCB 2 Layer 10mil DK3.0 DF 0.001 PCB

Rogers RO3003 high frequency circuit materials are ceramic-filled PTFE composites intended for use in commercial microwave and RF applications. It was designed to offer exceptional electrical and mechanical stability at competitive prices.

Rogers RO3010 High Frequency 2-Layer 10mil Printed Circuit Board PCB

RO3010 laminates are competitively priced products with exceptional mechanical and electrical stability. This stability simplifies the design of broadband components and allows the materials to be used in a wide range of applications over a very broad range of frequencies.

Company profile

All products